- Foundation
- About 14 min
- 5 practice questions
Water structures: wells, reservoirs and stepwells
Explain why India developed many kinds of water structures, and describe Harappan wells, the Shringaverpur reservoirs, stepwells such as Rani ki Vav, and temple tanks, and the threats they face today.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why India's climate led to a wide variety of water structures.
- Describe Harappan wells, the reservoirs at Shringaverpur, stepwells and temple tanks.
- Explain the threats to traditional water structures and why they are worth preserving.
India's monsoon brings most of the year's rain in a few months. For thousands of years, people have therefore built structures to harvest, store and distribute water for the dry season. These range from a simple village pond to highly sophisticated works like the Grand Anicut, and they differ with the land - Himalayan foothills, the Thar Desert, the Gangetic plains, the Western Ghats, the Deccan plateau and the North-East.
Harappan beginnings
This tradition goes back to the Harappans: recall Dholavira's large reservoirs. The Harappans also built wells that do not collapse inward, even under the pressure of water seeping in from the ground. They did this with trapezoid-shaped bricks that lock together when laid in a circle, each brick wider on the outside than on the inside.
Worked example 1: why the shape matters
Why would wedge-shaped (trapezoid) bricks keep a round well from collapsing? Step 1: Earth and water push inward on the wall from all sides. Step 2: Each brick is narrower on the inner face, so it cannot slip inward between its neighbours. Step 3: The more the ground pushes, the more tightly the bricks press against each other. Conclusion: the shape turns inward pressure into a tight lock - the same idea as an arch.
Shringaverpur's reservoirs
Shringaverpur in Uttar Pradesh was known as Shringaverapura in the Ramayana, described as the place where Rama, Sita and Lakshmana crossed the Ganga at the start of their exile. Excavations there uncovered a series of large, interconnected reservoirs fed by a channel from the Ganga during its seasonal floods. The first reservoir or two let the silt in the water settle - a fairly common design - though exactly how the whole complex worked is still being studied.
How the Shringaverpur reservoirs used flood water
- Ganga floods Seasonal high water enters a channel.
- Settling tanks Silt sinks in the first reservoir or two.
- Clearer water moves on It flows into the connected reservoirs.
- Stored for use Water is available after the floods pass.
Stepwells and temple tanks
Wells were built in many sizes and shapes, of brick, stone or terracotta rings. In classical times, a tradition of stepwells - called vavs or baoris - developed in Gujarat and Rajasthan. Steps lead down several storeys to the water, so people could reach it even when the level fell. Many are engineering marvels and works of art. Rani ki Vav (at Patan in Gujarat) has several pillared levels and hundreds of magnificent statues. Besides storing rainwater, stepwells were social spaces where people sat together in cool air and exchanged news.
Temples often had water tanks called pushkarinis, used for collecting rainwater and for rituals. Many were works of art in themselves, with numerous stairways built into their sides, like the pushkarini at Vijayanagara.
A stepwell (vav or baori) is a well reached by flights of steps going down several levels, so water can be drawn at any season; it also gives people a cool place to meet.
Two traditional water structures
-
Stepwell (vav or baori)
- Mainly Gujarat and Rajasthan
- Steps down several storeys
- Stores rainwater and groundwater
- Cool social meeting place
-
Temple tank (pushkarini)
- Attached to temples
- Collects rainwater
- Used for water rituals
- Stairways on its sides
Threats today
Many traditional water structures now suffer from depleted water sources, poor maintenance, pollution and waste dumping. Environmentalists, local people and voluntary organisations sometimes work together to restore them, but much remains to be done. Reviving them can help store rainwater and recharge groundwater, while preserving our heritage.
Worked example 2: reading a picture
A photo shows a deep square tank with stairways on all four sides, beside a temple. What is it and why so many stairways? Step 1: A tank beside a temple is a pushkarini. Step 2: The water level rises in the rains and falls in the dry months. Step 3: Stairways on every side let people reach the water at any level and from any direction, and allow many people to use it together.
| Structure | Where | Purpose |
|---|---|---|
| Harappan well | Harappan cities | Groundwater, with interlocking trapezoid bricks |
| Reservoirs | Dholavira; Shringaverpur | Storing water; settling silt from flood water |
| Stepwell (vav/baori) | Gujarat, Rajasthan (e.g. Rani ki Vav) | Water at all seasons; social space |
| Pushkarini | Temples (e.g. Vijayanagara) | Water harvesting and rituals |
Key takeaways: A monsoon climate led India to build many kinds of water structures, from Harappan interlocking-brick wells and reservoirs to Shringaverpur's flood-fed tanks, the stepwells of Gujarat and Rajasthan, and temple pushkarinis. They were practical, artistic and social. Many are threatened by neglect and pollution and need care.
Check your understanding
-
1. Why did people in India develop so many structures for storing water?
- Rain falls evenly throughout the year
- The monsoon brings most rain in a few months, so water must be stored for dry periods
- Rivers never flood
- Water was imported
Show answer
Answer: B. India's monsoon-driven climate concentrates rainfall in a short season, so harvesting and storing water is essential for the rest of the year.
-
2. How did the Harappans stop their wells from collapsing inward?
- They used iron rings
- They covered wells with domes
- They used trapezoid-shaped bricks that lock together
- They built wells only in rock
Show answer
Answer: C. Trapezoid bricks, narrower on the inner side, lock together in a circle and resist the inward pressure of seeping groundwater.
-
3. What was the purpose of the first reservoir or two in the Shringaverpur complex?
- To let silt in the flood water settle
- To store grain
- To keep fish
- To make bricks
Show answer
Answer: A. Water from the Ganga's seasonal floods first passed through tanks where the suspended silt could settle, a fairly common design.
-
4. Rani ki Vav is an example of:
- A Harappan well
- A temple tank in Vijayanagara
- A rock-cut cave
- A stepwell with several pillared levels and many statues
Show answer
Answer: D. Rani ki Vav is a stepwell (vav) in Gujarat, with multiple pillared levels and hundreds of statues - both an engineering work and a work of art.
-
5. Which is a threat faced by many traditional water structures today?
- Too much maintenance
- Waste dumping and pollution
- Too many statues
- Excessive rainfall harvesting
Show answer
Answer: B. Depleted water sources, lack of maintenance, pollution and waste dumping threaten these structures.
Sign in to keep track of the lessons you finish.