- Foundation
- About 15 min
- 5 practice questions
Tiling the plane with quadrilaterals
Explain what a tiling is, why the angles at every meeting point add to 360°, and how copies of any quadrilateral (and any triangle) can tile the plane, while a regular pentagon cannot.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain tiling and use the fact that the angles around each meeting point add to 360°.
- Describe how to tile the plane with any parallelogram, any triangle and any quadrilateral using 180° turns about midpoints of sides.
- Use the interior-angle formula to decide which regular polygons can tile the plane on their own.
Look at a floor of square tiles, a honeycomb or a brick wall. Each covers a flat surface with copies of shapes, leaving no gaps and with no overlaps. Such a covering is called a tiling (or tessellation) of the plane. The question for this lesson: which shapes can do this on their own? The answer for quadrilaterals is surprising.
Parallelograms first
A grid of rectangles is the easiest tiling. Imagine it made of wooden sticks hinged where they cross. Push the grid sideways: each family of sticks stays parallel, but the angle between the families changes. Every rectangle becomes the same parallelogram, so any parallelogram tiles the plane.
Any triangle also tiles: two copies of a triangle, one turned through 180° about the midpoint of a side, form a parallelogram, and parallelograms tile.
The 360° rule
At every point where corners of tiles meet, the angles around that point fill a full turn, so they must add to 360°. The four angles of any quadrilateral also add to 360°. That suggests an idea: fit four copies of the quadrilateral around one point so that each of its four angles is used once.
Any quadrilateral tiles the plane
Take any quadrilateral, even a non-convex one. The method:
Tiling with any quadrilateral
- Start with one tile Label its four angles a, b, c, d (a + b + c + d = 360°)
- Turn a copy 180° Rotate a copy through 180° about the midpoint of one side; it fits exactly along that side
- Repeat on every side Do the same at each side of each new tile
- Check the corners At each meeting point the angles a, b, c and d appear once each, adding to 360°
- Plane covered No gaps and no overlaps
Why does a 180° turn about the midpoint fit perfectly? The turn swaps the two ends of that side, so the side lands exactly on itself, and the turned tile lies on the other side of it. There is a second way to see the pattern: draw the Varignon parallelogram inside every tile. These parallelograms form a simple parallelogram grid, and the quadrilateral tiles sit on that grid.
Worked example 1: checking the corners
A quadrilateral has angles 65°, 100° and 120°. Find the fourth angle and check that four copies can meet at a point.
Working: fourth angle = 360° − (65° + 100° + 120°) = 360° − 285° = 75°. Around a meeting point of the tiling we place one copy of each angle: 65° + 100° + 120° + 75° = 360°, a full turn, so they fit with no gap.
Which regular polygons tile?
A polygon with n sides can be split into (n − 2) triangles from one vertex, so its angle sum is (n − 2) × 180°. In a regular polygon all angles are equal, so each is (n − 2) × 180° ÷ n. For copies of one regular polygon to meet at a point, this angle must divide 360° exactly.
| Regular polygon | Each interior angle | 360° ÷ angle | Tiles on its own? |
|---|---|---|---|
| Triangle (n = 3) | 60° | 6 | Yes |
| Square (n = 4) | 90° | 4 | Yes |
| Pentagon (n = 5) | 108° | 3.33... | No |
| Hexagon (n = 6) | 120° | 3 | Yes |
| Octagon (n = 8) | 135° | 2.66... | No |
At every corner of a tiling, the angles that meet add to 360°. Any triangle and any quadrilateral tile the plane; among regular polygons only the triangle, square and hexagon do.
Worked example 2: the regular pentagon
Show that regular pentagons cannot tile the plane.
Working: each angle = (5 − 2) × 180° ÷ 5 = 540° ÷ 5 = 108°. Three pentagons at a point give 324°, leaving a 36° gap; four would need 432°, which overlaps. Since 360 ÷ 108 is not a whole number, no arrangement works at a corner.
Worked example 3: the regular hexagon
Angle sum = (6 − 2) × 180° = 720°, so each angle = 720° ÷ 6 = 120°. Three hexagons at a point give 3 × 120° = 360°, so hexagons tile, as in a honeycomb.
Mathematicians have also found shapes that tile the plane only in patterns that never repeat. These are called aperiodic tilings, and in 2023 a single shape nicknamed the 'hat' was found that tiles only in this way. Similar non-repeating patterns help describe the arrangement of atoms in materials called quasicrystals.
Key takeaways: a tiling covers the plane with no gaps or overlaps, and the angles at every corner add to 360°. Any parallelogram, any triangle and any quadrilateral (convex or not) tile the plane; for quadrilaterals, turn copies through 180° about the midpoints of the sides. A regular polygon tiles alone only if its angle divides 360°, which happens just for n = 3, 4 and 6.
Check your understanding
-
1. Why can regular pentagons NOT tile the plane on their own?
- A pentagon has an odd number of sides
- Each angle is 108°, and 360 is not a whole-number multiple of 108
- A pentagon has no diagonals
- Its angles add to 360°
Show answer
Answer: B. Each interior angle is (5 − 2) × 180° ÷ 5 = 108°. Three give 324° (a gap) and four give 432° (an overlap), so copies cannot fill the 360° around a corner.
-
2. A quadrilateral used for a tiling has angles 80°, 95° and 105°. What is its fourth angle?
- 90°
- 100°
- 70°
- 80°
Show answer
Answer: D. Fourth angle = 360° − (80° + 95° + 105°) = 360° − 280° = 80°. In the tiling the four different angles meet once each at a corner, adding to 360°.
-
3. What is each interior angle of a regular octagon, and can regular octagons tile the plane alone?
- 135°; no
- 135°; yes
- 120°; yes
- 144°; no
Show answer
Answer: A. Angle sum = (8 − 2) × 180° = 1080°, so each angle = 1080° ÷ 8 = 135°. 360 ÷ 135 is not a whole number (two give 270°, three give 405°), so they cannot tile alone.
-
4. When tiling with copies of any quadrilateral, how is a neighbouring copy placed against a side?
- Reflect the tile in a diagonal
- Slide the tile along a side without turning
- Rotate a copy through 180° about the midpoint of that side
- Rotate a copy through 90° about a vertex
Show answer
Answer: C. A 180° turn about the midpoint of a side swaps the two ends of that side, so the copy fits exactly along it on the other side. Repeating this at every side tiles the plane.
-
5. Which of these can NOT tile the plane using copies of itself alone?
- Any triangle
- A non-convex quadrilateral
- A regular hexagon
- A regular pentagon
Show answer
Answer: D. Any triangle tiles (two copies form a parallelogram), any quadrilateral tiles (180° turns about midpoints of sides), and regular hexagons tile (3 × 120° = 360°). A regular pentagon's 108° angle does not divide 360°.
Sign in to keep track of the lessons you finish.