- Foundation
- About 15 min
- 5 practice questions
What exactly is a quadrilateral: definition, parts, convex and non-convex
State a precise definition of a quadrilateral, explain why each condition is needed, name its sides, angles and diagonals correctly, and tell a convex quadrilateral from a non-convex one.
If something looks wrong, please tell us.
By the end of this lesson you can
- Give a precise definition of quadrilateral ABCD and say which four-sided figures it rules out.
- Name adjacent and opposite sides and angles, the diagonals, and the 8 correct ways of naming ABCD.
- Decide whether a quadrilateral is convex or non-convex using its angles or its diagonals, and use the angle sum of 360°.
Floor tiles, window panes, kites, the screen you are reading on: four-sided shapes are everywhere. In earlier classes a quadrilateral was simply 'a figure with four straight sides'. That description is good enough for drawing, but not for proving things. In this lesson we build an exact definition, so that every later theorem in the chapter is about a clearly defined object.
Building the definition step by step
A triangle is easy: take three points A, B, C that are not on one line and join AB, BC and CA. If the three points were on one line we would only get a line segment. For four points A, B, C, D and the four segments AB, BC, CD and DA, more things can go wrong:
- Three points on one line. If, say, A, B and C are collinear, sides AB and BC lie along the same line. The figure collapses into a triangle, or two sides overlap.
- Points not in one plane. Fold a sheet of paper along a diagonal and mark its four corners: the four sides now form a 'bent' figure in space. Such a figure is called a non-planar 4-gon.
- Sides that cross. Join the corners in the order top-left, bottom-right, top-right, bottom-left and you get a bow-tie whose two sides cross in the middle. This is a self-intersecting 4-gon.
We usually want to exclude all three. The neat way to exclude crossing and overlapping sides together is to demand that every point of the figure, except the four corners, lies on exactly one of the four sides.
Definition: Let A, B, C, D be four distinct points in a plane. The points on the segments AB, BC, CD and DA form quadrilateral ABCD if every one of these points, other than A, B, C and D, lies on exactly one of the four segments.
Figures with 4 vertices and 4 sides (4-gons)
-
Non-planar
- The four vertices are not in one plane
- Example: a sheet folded along a diagonal
-
Self-intersecting
- Two sides cross each other
- Looks like a bow-tie
-
Non-convex quadrilateral
- Has a 'dent'
- One internal angle is more than 180°
-
Convex quadrilateral
- No dent
- Every internal angle is less than 180°
The parts of a quadrilateral
| Word | Meaning | In quadrilateral ABCD |
|---|---|---|
| Vertices | The four corner points | A, B, C, D |
| Sides | The four segments joining consecutive vertices | AB, BC, CD, DA |
| Diagonals | Segments joining vertices that are not next to each other | AC and BD |
| Adjacent sides | Two sides that share an endpoint | AB and BC; AB and DA |
| Opposite sides | Two sides with no common endpoint | AB and CD; BC and DA |
| Adjacent angles | Internal angles at the two ends of one side | ∠A and ∠B |
| Opposite angles | Internal angles at vertices not joined by a side | ∠A and ∠C; ∠B and ∠D |
Worked example 1: naming a quadrilateral
Which of these are names for quadrilateral ABCD: CDAB, ABDC, CBAD, ACBD?
Working: a name must list the vertices in the order you meet them while walking round the boundary. Starting at any vertex and going one way gives ABCD, BCDA, CDAB, DABC. Going the other way gives DCBA, CBAD, BADC, ADCB. That is 8 names in all. So CDAB and CBAD are correct. ABDC is wrong because it would make BD a side, but BD is a diagonal. ACBD is wrong because it would make AC a side.
Convex and non-convex quadrilaterals
Some quadrilaterals look as if a bite has been taken out of a triangle. At the dent, the internal angle is a reflex angle (more than 180°). We call such a quadrilateral non-convex. A quadrilateral is convex when all four internal angles are less than 180°.
A second test uses the diagonals: in a convex quadrilateral the two diagonals cross each other inside the figure; in a non-convex quadrilateral they do not meet (one of them lies outside the figure).
The angle sum is 360° for every quadrilateral, convex or not. Draw a diagonal that lies inside the figure (for a non-convex one, the diagonal from the dented vertex). It splits the quadrilateral into two triangles, and 180° + 180° = 360°. A useful consequence: a quadrilateral can have at most one reflex angle, because two angles each above 180° would already add to more than 360°.
Worked example 2: finding the fourth angle
In quadrilateral PQRS, ∠P = 35°, ∠Q = 40° and ∠R = 45°. Find ∠S and decide whether PQRS is convex.
Working: ∠S = 360° − (35° + 40° + 45°) = 360° − 120° = 240°. Since 240° > 180°, PQRS has a dent at S, so it is non-convex.
Worked example 3: angles in a ratio
The angles of a quadrilateral are in the ratio 2 : 3 : 3 : 4. Find them.
Working: let the angles be 2x, 3x, 3x and 4x. Then 2x + 3x + 3x + 4x = 12x = 360°, so x = 30°. The angles are 60°, 90°, 90° and 120°. All are less than 180°, so the quadrilateral is convex. Check: 60 + 90 + 90 + 120 = 360.
Why bother with strange 4-gons at all? Machines use four-bar linkages: four rods hinged at their ends. As the rods move, the shape they form can become non-convex or even self-intersecting, so engineers must understand those shapes too.
Key takeaways: a quadrilateral needs four points in a plane, no three on a line, with every non-corner point on exactly one side. It has 4 sides, 4 angles and 2 diagonals, and exactly 8 correct names. It is convex when every angle is below 180° (the diagonals cross) and non-convex when one angle is reflex. The angles always add up to 360°.
Check your understanding
-
1. Four distinct points A, B, C and D lie in one plane. In which case can segments AB, BC, CD and DA NOT form quadrilateral ABCD?
- A, B and C lie on one straight line
- No three of the points lie on one line and the sides do not cross
- Side AB is longer than side CD
- ∠A is an obtuse angle
Show answer
Answer: A. If A, B and C are collinear, sides AB and BC lie along the same line, so the figure collapses into a triangle or has overlapping sides. Side lengths and an obtuse angle cause no problem.
-
2. Which of these is NOT a correct name for quadrilateral ABCD?
- BCDA
- DCBA
- ACBD
- CDAB
Show answer
Answer: C. Correct names follow the boundary in order, in either direction: ABCD, BCDA, CDAB, DABC, DCBA, CBAD, BADC, ADCB. ACBD would make AC a side, but AC is a diagonal of ABCD.
-
3. Three angles of a quadrilateral are 40°, 50° and 60°. What is the fourth angle, and what kind of quadrilateral is it?
- 150°, convex
- 210°, convex
- 150°, non-convex
- 210°, non-convex
Show answer
Answer: D. Fourth angle = 360° − (40° + 50° + 60°) = 360° − 150° = 210°. An angle of 210° is more than 180°, so the quadrilateral has a dent there: it is non-convex.
-
4. Why can a quadrilateral never have two reflex angles?
- Because reflex angles exist only in triangles
- Because two angles each greater than 180° would already add to more than 360°
- Because the diagonals would become equal
- Because opposite angles must always be equal
Show answer
Answer: B. The four angles of a quadrilateral add up to exactly 360°. Two reflex angles would together exceed 360°, leaving nothing (in fact less than nothing) for the other two angles.
-
5. Which statement about the diagonals of a convex quadrilateral is always true?
- They are equal in length
- They are perpendicular to each other
- They intersect at a point inside the quadrilateral
- They never meet
Show answer
Answer: C. In a convex quadrilateral the diagonals always cross inside the figure; this is one way to test convexity. They are equal or perpendicular only in special cases such as rectangles or rhombuses.
Sign in to keep track of the lessons you finish.