- Foundation
- About 25 min
- 15 practice questions
Final self-assessment: Introduction to computer
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 25 minutes before looking at any answer. Write your working for the conversion questions. The questions mix ideas from all five lessons and are a little harder than the lesson checks. When you finish, compare your answers and read every explanation, including those for questions you got right.
Final self-assessment
-
1. A program is given the marks 40, 50 and 66 and shows 'Average: 52'. Which of these is information?
- The three marks
- The program
- The average 52
- The keyboard
Show answer
Answer: C. Information is processed data. The average is (40 + 50 + 66) ÷ 3 = 156 ÷ 3 = 52, the result of processing. The marks are raw data, the program is software and the keyboard is hardware.
-
2. A clerk means to type 2 + 2 but types 2 + 3, and the computer shows 5. This best illustrates:
- Lack of diligence
- Garbage In, Garbage Out
- Low speed
- Versatility
Show answer
Answer: B. The computer processed the wrong input correctly and gave a wrong result for what the clerk meant. That is GIGO: wrong input produces wrong output. The machine was neither slow nor careless.
-
3. You type a letter and save it. Which order of steps is correct?
- Process, input, output, storage
- Output, input, process, storage
- Storage, output, process, input
- Input, process, output, storage
Show answer
Answer: D. Typing is input, the word processor processes the keystrokes, the text appears on screen as output, and saving keeps it in storage. Input must always come before processing.
-
4. Which pairing of technology and generation is correct?
- Vacuum tube: third generation
- Integrated circuit: third generation
- Transistor: first generation
- Microprocessor: second generation
Show answer
Answer: B. Integrated circuits define the third generation. Vacuum tubes belong to the first, transistors to the second and microprocessors to the fourth generation.
-
5. In Babbage's Analytical Engine, the 'mill' corresponds to which part of a modern computer?
- Memory
- Printer
- The processing unit, like today's CPU
- Punched card
Show answer
Answer: C. The mill was where calculations were carried out, like the CPU. The 'store' was the memory, and punched cards were used for input.
-
6. Which statement about first-generation computers is NOT true?
- They used vacuum tubes
- They produced a lot of heat
- They were programmed in machine language
- They were small enough to fit on a desk
Show answer
Answer: D. First-generation machines filled whole rooms. They did use vacuum tubes, ran hot and were programmed in machine language, so only the desk-size statement is false.
-
7. Which list goes from the fastest memory to the slowest?
- Hard disk, RAM, cache, registers
- Registers, cache, RAM, hard disk
- Cache, registers, hard disk, RAM
- RAM, registers, cache, hard disk
Show answer
Answer: B. Registers inside the CPU are fastest, then cache, then RAM, then secondary storage such as the hard disk. This is the memory hierarchy.
-
8. Taking 1 MB = 1024 KB, how many KB are there in 6 MB?
- 6,000
- 600
- 61,440
- 6,144
Show answer
Answer: D. 6 MB = 6 × 1024 KB = 6,144 KB. The figure 6,000 would follow only from the decimal convention of 1000, which the question does not use.
-
9. Which statement about the control unit is correct?
- It performs addition and subtraction
- It stores files permanently
- It directs and coordinates the other parts but does not itself calculate
- It is a type of secondary storage
Show answer
Answer: C. The control unit fetches and decodes instructions and directs the other parts. Arithmetic is done by the ALU, and permanent storage is the job of secondary storage devices.
-
10. A school must read hundreds of answer sheets on which students have darkened bubbles. Which device suits this job?
- OMR
- OCR
- MICR
- Plotter
Show answer
Answer: A. An Optical Mark Reader detects darkened marks in fixed positions. OCR reads printed characters, MICR reads magnetic-ink characters on cheques, and a plotter is an output device.
-
11. An engineer needs large, precise printed drawings of a building plan. Which device is most suitable?
- Scanner
- Webcam
- Dot-matrix printer
- Plotter
Show answer
Answer: D. A plotter is designed to produce large, precise drawings such as plans and maps. A scanner and a webcam are input devices, and a dot-matrix printer gives low-quality small prints.
-
12. A laptop is connected to a projector with a VGA cable. The picture appears but there is no sound from the projector. What is the most likely reason?
- VGA carries only video, not audio
- The projector is an input device
- VGA is a network port
- The laptop has no CPU
Show answer
Answer: A. VGA is an analog video connection and carries no sound, so audio needs a separate cable or speakers. HDMI would carry both. A projector is an output device, and VGA is not a network port.
-
13. What is the hexadecimal number 1A in decimal?
- 16
- 110
- 26
- 10
Show answer
Answer: C. In hexadecimal A = 10. So 1A = 1 × 16 + 10 = 26.
-
14. What is the binary number 101101 in decimal?
- 53
- 45
- 43
- 41
Show answer
Answer: B. Place values from the left are 32, 16, 8, 4, 2, 1. Add those under a 1: 32 + 0 + 8 + 4 + 0 + 1 = 45.
-
15. Which pairing is correct?
- Operating system: application software
- Compiler: hardware
- Keyboard: system software
- Spreadsheet: application software
Show answer
Answer: D. A spreadsheet helps the user with a task, so it is application software. An operating system is system software, a compiler is a translator (software), and a keyboard is hardware.
Questions 1-3: lesson 1 (what a computer is). Questions 4-6: lesson 2 (evolution and generations). Questions 7-9: lesson 3 (CPU and memory). Questions 10-12: lesson 4 (input, output and ports). Questions 13-15: lesson 5 (software and number systems).
Sign in to keep track of the lessons you finish.