• Foundation
  • About 14 min
  • 5 practice questions

What a computer is: input, process, output and its characteristics

Explain in your own words what a computer is, tell data from information, follow the input-process-output cycle and name the main characteristics and limits of a computer.

If something looks wrong, please tell us.

Computers are everywhere: at the railway ticket counter, inside a bank ATM, in the billing machine of a shop and in the mobile phone in your pocket. Before you learn about their parts, you need a clear picture of what a computer actually is and what it does. This first lesson of the CCC course's chapter on the introduction to computers builds that picture from zero, in plain language.

What is a computer?

A computer is an electronic machine that accepts data, processes it according to a set of instructions, stores it and gives the result. The set of instructions is called a program. The word comes from 'compute', which means to calculate. Early computers only did arithmetic, but a modern computer also writes letters, plays songs, shows maps and sends messages, because all of these can be turned into numbers that the machine processes.

Two words appear in almost every question on this topic. Hardware is the physical part of a computer that you can touch, such as the keyboard, the screen and the chips inside. Software is the set of programs that tell the hardware what to do. You will study both in more detail in later lessons.

Data and information

Data means raw facts and figures that have not yet been processed, for example the marks 45, 67 and 83 written on a sheet. Information is data that has been processed so that it is meaningful and useful, for example 'the class average is 65'. A computer takes in data and turns it into information.

Data and information

  • Data
    • Raw facts and figures
    • Not yet processed
    • Example: the marks 45, 67 and 83
  • Information
    • Data that has been processed
    • Meaningful and useful
    • Example: the class average is 65

The input-process-output cycle

Every task a computer does follows the same four steps. Together they are called the input-process-output (IPO) cycle; because results are usually saved, many books call it the IPOS cycle.

The input-process-output (IPOS) cycle

  1. Input Data and instructions are given to the computer.
  2. Process The computer works on the data as the program says.
  3. Output The result is shown or printed.
  4. Storage Data or results are kept for later use.
StepWhat happensExample: finding 25 × 4 on a computer calculator
1. InputData and instructions are given to the computerYou type 25, the × sign and 4
2. ProcessThe computer works on the data as the program saysThe processor multiplies 25 by 4
3. OutputThe result is shown or printed100 appears on the screen
4. StorageData or results are kept for later useThe answer stays in the calculator's history

Worked example 1: billing at a shop

A shopkeeper scans three items. Input: the barcode reader sends each product code to the computer. Process: the computer looks up each price and adds them, say ₹40 + ₹25 + ₹35 = ₹100. Output: the total ₹100 appears on the screen and a receipt is printed. Storage: the sale is saved so that the shopkeeper can see the day's sales in the evening. All four steps of the cycle are present.

Worked example 2: data or information?

A teacher enters the marks 45, 67 and 83 and the program shows 'Average: 65'. Working: 45 + 67 + 83 = 195, and 195 ÷ 3 = 65. The three marks are data (raw facts). The average 65 is information (processed and meaningful). The keyboard used to type the marks is hardware, and the program that calculated the average is software.

Characteristics of a computer

CharacteristicMeaning
SpeedA computer carries out millions of instructions in a second. Its operations are timed in very small units such as microseconds and nanoseconds.
AccuracyWhen the data and the program are correct, the result is correct every time. Errors almost always come from wrong input or wrong instructions.
DiligenceA computer does not get tired or bored. It can repeat the same task millions of times with the same care.
VersatilityThe same machine can do very different jobs: typing, accounts, games, video calls.
StorageIt can store huge amounts of data and bring any part of it back quickly.
AutomationOnce a program starts, the computer follows its instructions without a person guiding each step.
ReliabilityModern hardware works for long periods without failure.

Limitations of a computer

  • No intelligence of its own (no IQ): it cannot decide what to do without a program written by a person.
  • No feelings: it has no emotions, common sense or judgement.
  • Garbage In, Garbage Out (GIGO): if wrong data or wrong instructions go in, wrong results come out. The computer does not notice that the input was a mistake.
  • Depends on power and instructions: it cannot work without electricity and software.

Computer = Input → Process → Output (→ Storage), all under the control of a program. Data is raw; information is processed. Garbage In, Garbage Out.

Key takeaways: a computer is an electronic machine that accepts data, processes it under a program, stores it and gives output. Data becomes information by processing. Speed, accuracy, diligence, versatility and storage are its strengths; it cannot think for itself, and wrong input gives wrong output.

Check your understanding

  1. 1. Raw facts and figures that have not yet been processed are called:

    1. Information
    2. Data
    3. A program
    4. Output
    Show answer

    Answer: B. Data means raw, unprocessed facts such as marks or prices. Information is what you get after processing data; a program is a set of instructions; output is the result shown or printed.

  2. 2. In the input-process-output cycle, which step comes straight after input?

    1. Output
    2. Booting
    3. Printing
    4. Processing
    Show answer

    Answer: D. The order is input, then processing, then output, then storage. The computer must work on the data before it can show any result.

  3. 3. What does GIGO stand for in computing?

    1. Garbage In, Garbage Out: wrong input gives wrong output
    2. Good Input, Good Output: every input is checked
    3. Get Information, Give Orders
    4. General Input, General Output: the name of a port
    Show answer

    Answer: A. GIGO means Garbage In, Garbage Out. A computer processes exactly what it is given, so wrong data or wrong instructions produce wrong results.

  4. 4. A computer can repeat the same calculation for hours without getting tired or losing concentration. Which characteristic is this?

    1. Versatility
    2. Accuracy
    3. Diligence
    4. Storage
    Show answer

    Answer: C. Diligence means working continuously without tiredness or boredom. Versatility is doing many kinds of work, accuracy is giving correct results, and storage is keeping data.

  5. 5. Which of these is a limitation of a computer?

    1. It works at very high speed
    2. It can store large amounts of data
    3. It can do many different kinds of work
    4. It cannot decide what to do without instructions from a person
    Show answer

    Answer: D. A computer has no intelligence of its own: it only follows a program. High speed, large storage and versatility are its strengths, not limitations.

Privacy · Terms · Refunds · Delivery