• Foundation
  • About 12 min
  • 5 practice questions

Acids and bases in water: ions, conductivity and dilution

See what acids and bases do when they dissolve, why their solutions conduct electricity, and how to dilute them safely.

If something looks wrong, please tell us.

A dry crystal of an acid or a base is not very exciting. The chemistry begins when it dissolves. In water, acids and bases split into charged particles called ions, and almost every property you have learnt, from the colour change of litmus to the flow of current through the solution, comes from those ions. This lesson explains what happens in the water and how to handle the solutions safely.

What happens when an acid dissolves

Hydrogen chloride is a gas made of HCl molecules. When it dissolves in water the molecules break up: HCl → H⁺ + Cl⁻. A bare hydrogen ion is just a proton, and it cannot float alone in water. It attaches itself to a water molecule and forms the hydronium ion, H₃O⁺. For school chemistry we usually write H⁺(aq) as a short form of H₃O⁺. Every acid is a substance that gives hydrogen ions (hydronium ions) in water: H₂SO₄ gives two H⁺ for each molecule, and HNO₃ gives one.

What happens when a base dissolves

A soluble base such as sodium hydroxide is already made of ions in its solid form. Water simply frees them: NaOH → Na⁺ + OH⁻. Potassium hydroxide gives K⁺ and OH⁻. Calcium hydroxide gives Ca²⁺ and two OH⁻ for each formula unit. The hydroxide ions are responsible for the soapy feel, the bitter taste and the colour changes of indicators in an alkaline solution.

Why the solutions conduct electricity

Electric current in a solution is carried by moving ions. Pure water has almost no ions, so it is a very poor conductor. Add an acid or an alkali and the number of ions rises sharply, so the solution conducts and a bulb in the circuit glows. Compare this with glucose or alcohol: both contain hydrogen in their formulas, but they do not release H⁺ ions in water, so their solutions do not conduct and they are not acids. This is a useful test: having hydrogen in the formula does not make a substance an acid; releasing H⁺ in water does.

If two solutions of equal concentration are tested, a strong acid makes the bulb glow more brightly than a weak acid, because it has released more ions.

Dilution

Diluting means adding water. The number of H⁺ ions in the acid does not change, but they are now spread through a larger volume, so the concentration falls. The number of moles stays the same before and after: concentration × volume (before) = concentration × volume (after), written C₁V₁ = C₂V₂.

Dissolving a concentrated acid or solid sodium hydroxide in water releases a great deal of heat. For this reason the rule is: always add the acid (or alkali) slowly to water, stirring all the time; never add water to the concentrated acid. If water is poured onto the acid, the heat may boil the small amount of water at once and spit out acid. The container used should be able to take heat, and eye protection is a must.

Worked examples

Example 1. 10 mL of 0.1 mol/L hydrochloric acid is diluted by adding water until the total volume is 100 mL. Find the new concentration. Using C₁V₁ = C₂V₂: 0.1 × 10 = C₂ × 100, so C₂ = 1/100 = 0.01 mol/L. The concentration is ten times smaller, so the pH rises from 1 to 2.

Example 2. Which of these solutions will make a bulb glow: hydrochloric acid, glucose, sodium hydroxide, alcohol, sulphuric acid? The acid and alkali solutions (hydrochloric acid, sodium hydroxide, sulphuric acid) contain ions and will conduct. Glucose and alcohol solutions contain only molecules, so the bulb stays off.

Example 3. 4 g of sodium hydroxide (Na = 23, O = 16, H = 1) is dissolved in water to make 1 litre of solution. What is the concentration of hydroxide ions? Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol. Moles = 4 ÷ 40 = 0.1 mol. Each NaOH gives one OH⁻, so there is 0.1 mol of OH⁻ in 1 litre, a concentration of 0.1 mol/L.

Acid in water gives H⁺ (as H₃O⁺); alkali in water gives OH⁻. Ions carry the current. Dilute by adding the acid to water, never water to acid.

— Rule to remember

Key takeaways

  • Acids release H⁺ (hydronium) ions in water; alkalis release OH⁻ ions.
  • Solutions of acids and alkalis conduct electricity because of their ions; glucose and alcohol do not conduct.
  • Dilution lowers the concentration but keeps the number of moles the same (C₁V₁ = C₂V₂).
  • Add acid to water slowly with stirring, never water to concentrated acid.

Check your understanding

  1. 1. What is the hydronium ion?

    1. H₃O⁺, formed when H⁺ joins a water molecule
    2. OH⁻, formed when a base dissolves in water
    3. H₂O₂, a molecule found in bleaching liquids
    4. H₃O⁻, formed when water gains an electron
    Show answer

    Answer: A. A free H⁺ cannot exist alone in water. It attaches to a water molecule to give the hydronium ion, H₃O⁺.

  2. 2. Which of these solutions will NOT conduct electricity?

    1. Dilute hydrochloric acid in water
    2. Sodium hydroxide dissolved in water
    3. Glucose dissolved in water
    4. Dilute sulphuric acid in water
    Show answer

    Answer: C. Glucose contains hydrogen but dissolves as molecules, not ions, so its solution does not conduct. The acids and the alkali all give ions.

  3. 3. Why must concentrated acid be added to water and not the other way round?

    1. Water reacts with the acid to give a gas
    2. The acid would become a base on the way
    3. The acid would turn the water into pure oxygen
    4. Heat released may boil water and spit out acid
    Show answer

    Answer: D. Mixing releases a lot of heat. If water is added to the acid, the small amount of water may boil at once and splash acid. Adding acid slowly to a large amount of water spreads the heat.

  4. 4. 50 mL of 0.2 mol/L acid is diluted to 200 mL. What is the new concentration?

    1. 0.80 mol/L after dilution
    2. 0.05 mol/L after dilution
    3. 0.40 mol/L after dilution
    4. 0.10 mol/L after dilution
    Show answer

    Answer: B. C₁V₁ = C₂V₂ gives 0.2 × 50 = C₂ × 200, so C₂ = 10 ÷ 200 = 0.05 mol/L.

  5. 5. How many moles of OH⁻ are given by 0.2 mol of Ca(OH)₂ dissolved fully in water?

    1. 0.4 mol, since each unit gives two OH⁻
    2. 0.2 mol, since each unit gives one OH⁻
    3. 0.1 mol, since each unit gives half an OH⁻
    4. 0.8 mol, since each unit gives four OH⁻
    Show answer

    Answer: A. Ca(OH)₂ → Ca²⁺ + 2OH⁻. Each formula unit gives two hydroxide ions, so 0.2 mol gives 0.4 mol of OH⁻.

Privacy · Terms · Refunds · Delivery