- Foundation
- About 12 min
- 5 practice questions
Writing and balancing equations for acids, bases and salts
Follow a step-by-step method to write correct formulas, balance equations and name the salts formed in the common acid-base reactions.
If something looks wrong, please tell us.
Many students lose marks in this chapter not because they do not know the chemistry, but because the equation is unbalanced or the salt formula is wrong. Writing equations is a skill with a fixed method. Follow the steps below and you can write an equation for any acid and base.
Step 1: name the reactants and the salt
Decide the type of reaction first. Acid + base gives salt + water. Acid + metal gives salt + hydrogen. Acid + carbonate gives salt + water + carbon dioxide. Then name the salt: the metal (or ammonium) from the base or metal, and the family name from the acid. For example, sulphuric acid and zinc will give zinc sulphate.
Step 2: write the correct formulas
Write each formula using the valencies of the ions and cross them over. Aluminium has valency 3 and chloride has valency 1, so aluminium chloride is AlCl₃. Calcium has valency 2 and nitrate has valency 1, so calcium nitrate is Ca(NO₃)₂, where the bracket shows that the subscript 2 applies to the whole nitrate group. Never change a subscript to balance an equation; only change the numbers in front of formulas.
Step 3: balance atoms one element at a time
Count the atoms of each element on both sides. Begin with the metal, then the non-metals, and leave hydrogen and oxygen for last. If a polyatomic ion such as SO₄ or NO₃ stays unchanged on both sides, count it as one unit; this saves time.
| Reaction | Balanced equation |
|---|---|
| Acid + base | H₂SO₄ + 2KOH → K₂SO₄ + 2H₂O |
| Acid + metal | 2Al + 6HCl → 2AlCl₃ + 3H₂ |
| Acid + carbonate | Na₂CO₃ + 2HNO₃ → 2NaNO₃ + H₂O + CO₂ |
| Acid + metal oxide | MgO + H₂SO₄ → MgSO₄ + H₂O |
Step 4: check, and add state symbols if asked
Count every element again. The totals must agree on both sides. State symbols are (s) for solid, (l) for liquid, (g) for gas and (aq) for a solution in water. In the neutralisation of any strong acid by a strong base the real change is H⁺(aq) + OH⁻(aq) → H₂O(l); this is the ionic equation, in which the spectator ions (the ions that do not change) are left out.
Worked examples
Example 1. Write the balanced equation for calcium hydroxide and nitric acid. Salt: calcium nitrate, Ca(NO₃)₂. Unbalanced: Ca(OH)₂ + HNO₃ → Ca(NO₃)₂ + H₂O. Two nitrate groups need 2HNO₃. The two OH and two H make 2H₂O. Balanced: Ca(OH)₂ + 2HNO₃ → Ca(NO₃)₂ + 2H₂O. Check: Ca 1 and 1; N 2 and 2; O 2 + 6 = 8 and 6 + 2 = 8; H 2 + 2 = 4 and 4.
Example 2. Write the equation for aluminium and sulphuric acid. Salt: aluminium sulphate, Al₂(SO₄)₃. Unbalanced: Al + H₂SO₄ → Al₂(SO₄)₃ + H₂. Two Al on the right need 2Al on the left. Three sulphate groups need 3H₂SO₄, which gives 3H₂. Balanced: 2Al + 3H₂SO₄ → Al₂(SO₄)₃ + 3H₂. Check: Al 2 and 2; S 3 and 3; O 12 and 12; H 6 and 6.
Example 3. How many moles of carbon dioxide come from 0.5 mol of calcium carbonate with excess hydrochloric acid? The equation is CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂. One mole of CaCO₃ gives one mole of CO₂, so 0.5 mol of CaCO₃ gives 0.5 mol of CO₂. At room conditions that is a volume of roughly 12 litres, using the textbook value of 24 litres per mole.
Name the salt, write its formula with valencies, balance one element at a time, and check the totals. Never change a subscript to balance.
Key takeaways
- The name of a salt is the metal followed by the family name of the acid.
- Formulas come from crossing valencies; brackets show a group repeated.
- Balance with coefficients only, polyatomic ions as units, hydrogen and oxygen last.
- The ionic equation for strong acid and strong base is H⁺ + OH⁻ → H₂O.
Check your understanding
-
1. What is the balanced equation for sodium hydroxide and sulphuric acid?
- NaOH + H₂SO₄ → NaSO₄ + H₂O
- 2NaOH + H₂SO₄ → Na₂SO₄ + 2H₂O
- NaOH + 2H₂SO₄ → Na₂SO₄ + H₂O
- 2NaOH + H₂SO₄ → Na₂SO₄ + H₂
Show answer
Answer: B. Sodium sulphate is Na₂SO₄, which needs two Na, so two NaOH. Two OH with the two H of the acid give 2H₂O.
-
2. What is the formula of aluminium nitrate?
- AlNO₃, one of each
- Al₃NO, three to one
- Al₂(NO₃)₃, two and three
- Al(NO₃)₃, one and three
Show answer
Answer: D. Aluminium has valency 3 and nitrate has valency 1, so one Al combines with three NO₃ groups: Al(NO₃)₃.
-
3. What coefficient goes in front of HCl: CaCO₃ + __HCl → CaCl₂ + H₂O + CO₂?
- 2, to supply two chlorines
- 1, to supply one chlorine
- 3, to supply three hydrogens
- 4, to supply four hydrogens
Show answer
Answer: A. Two chloride ions are needed for CaCl₂, so two HCl. Then H: 2 = 2 in H₂O, and the equation balances.
-
4. The ionic equation for neutralisation of a strong acid by a strong base is:
- H₂ + O₂ → H₂O
- Na⁺ + Cl⁻ → NaCl
- H⁺ + Cl⁻ → HCl
- H⁺ + OH⁻ → H₂O
Show answer
Answer: D. Spectator ions such as Na⁺ and Cl⁻ stay in solution. The change that actually happens is H⁺ + OH⁻ → H₂O.
-
5. How many moles of H₂ are released when 2 mol of aluminium react with excess HCl: 2Al + 6HCl → 2AlCl₃ + 3H₂?
- Two moles
- Six moles
- Three moles
- One mole
Show answer
Answer: C. The equation shows 2 mol Al giving 3 mol H₂. With exactly 2 mol of Al, 3 mol of hydrogen are released.
Sign in to keep track of the lessons you finish.