• Foundation
  • About 25 min
  • 15 practice questions

Final self-assessment: Chemical reactions

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions on your own, writing down your working for the balancing and rate questions, and only then check the answers and explanations. These questions are a little harder on average than the lesson checks and mix ideas from the whole course.

Final self-assessment

  1. 1. An iron nail is left in copper sulfate solution. Which observation is correct?

    1. The solution turns from colourless to blue
    2. The blue solution fades to pale green and a reddish-brown coating forms on the nail
    3. Bubbles of hydrogen rise from the nail
    4. A yellow precipitate forms
    Show answer

    Answer: B. Iron displaces copper: Fe + CuSO4 → FeSO4 + Cu. The blue colour of copper sulfate fades (iron sulfate is pale green) and copper deposits on the nail.

  2. 2. Which pair contains only chemical changes?

    1. Melting ice and boiling water
    2. Dissolving salt and rusting
    3. Curdling of milk and rusting of iron
    4. Tearing paper and burning paper
    Show answer

    Answer: C. Curdling and rusting both form new substances. Each other pair contains a physical change (melting, boiling, dissolving, tearing).

  3. 3. Which test shows that the gas from zinc and dilute sulfuric acid is hydrogen?

    1. It turns lime water milky
    2. It relights a glowing splinter
    3. It smells of rotten eggs
    4. It burns with a pop sound when a burning splinter is brought near
    Show answer

    Answer: D. Hydrogen burns with a pop. Turning lime water milky is the test for carbon dioxide, and relighting a glowing splinter is the test for oxygen.

  4. 4. What are the coefficients that balance Fe + H2O → Fe3O4 + H2?

    1. 3, 4, 1, 4
    2. 1, 1, 1, 1
    3. 3, 2, 1, 2
    4. 2, 4, 1, 4
    Show answer

    Answer: A. Fe3O4 needs 4 O, so 4H2O; that gives 8 H, so 4H2; Fe3O4 needs 3 Fe, so 3Fe. 3Fe + 4H2O → Fe3O4 + 4H2.

  5. 5. Balance C2H6 + O2 → CO2 + H2O using the smallest whole numbers. What is the coefficient of O2?

    1. 3
    2. 7
    3. 5
    4. 14
    Show answer

    Answer: B. C: 2CO2; H: 3H2O; O on the right = 4 + 3 = 7, so 3.5 O2. Double everything: 2C2H6 + 7O2 → 4CO2 + 6H2O.

  6. 6. Why must a chemical equation be balanced?

    1. To make the products lighter
    2. Because of the law of conservation of mass
    3. So that the reaction goes faster
    4. Because subscripts must be equal on both sides
    Show answer

    Answer: B. Atoms are only rearranged in a reaction, so mass is conserved and each element must appear equally on both sides.

  7. 7. Heating green ferrous sulfate crystals gives a brown solid and gases: 2FeSO4 → Fe2O3 + SO2 + SO3. What type of reaction is this?

    1. Combination
    2. Displacement
    3. Double displacement
    4. Thermal decomposition
    Show answer

    Answer: D. One compound breaks down into three products when heated: thermal decomposition.

  8. 8. Which of these reactions will NOT take place?

    1. Zn + CuSO4
    2. Mg + FeSO4
    3. Cu + FeSO4
    4. Fe + CuSO4
    Show answer

    Answer: C. Copper is below iron in the reactivity series, so it cannot displace iron. In the other cases the free metal is above the metal in the salt.

  9. 9. NaOH + HCl → NaCl + H2O is best described as

    1. a neutralisation, which is a double displacement reaction
    2. a combination reaction
    3. a decomposition reaction
    4. a displacement reaction of sodium by hydrogen
    Show answer

    Answer: A. The acid and base swap partners (Na with Cl, H with OH) to give a salt and water: neutralisation, a type of double displacement.

  10. 10. In 2Na + Cl2 → 2NaCl, what happens to sodium?

    1. It gains one electron and is reduced
    2. It gains oxygen
    3. It loses one electron and is oxidised
    4. It is unchanged
    Show answer

    Answer: C. Each Na atom loses one electron to become Na+. Loss of electrons is oxidation (OIL RIG).

  11. 11. In Fe2O3 + 2Al → Al2O3 + 2Fe, which substance is the oxidising agent?

    1. Al
    2. Fe2O3
    3. Al2O3
    4. Fe
    Show answer

    Answer: B. Fe2O3 gives its oxygen to aluminium and is itself reduced to iron, so Fe2O3 is the oxidising agent. Aluminium is oxidised and is the reducing agent.

  12. 12. An iron nail is kept in a test tube of boiled water with a layer of oil on top. Why does it not rust?

    1. Boiled water is acidic
    2. The oil reacts with rust
    3. Iron cannot rust in water
    4. Boiling removes dissolved air and the oil stops air dissolving again, so there is no oxygen
    Show answer

    Answer: D. Rusting needs both water and oxygen. Boiling drives out dissolved air and the oil keeps fresh air out.

  13. 13. Which statement about adding water to quicklime is correct?

    1. It is exothermic and the mixture becomes hot
    2. It is endothermic and the mixture becomes cold
    3. No reaction takes place
    4. It is a decomposition reaction
    Show answer

    Answer: A. CaO + H2O → Ca(OH)2 is a combination reaction that gives out a lot of heat.

  14. 14. Marble chips react with dilute hydrochloric acid. Which change would make the reaction slower?

    1. Using marble powder instead of chips
    2. Diluting the acid with more water
    3. Warming the acid
    4. Using a more concentrated acid
    Show answer

    Answer: B. Diluting lowers the concentration, so there are fewer collisions per second. The other three changes all speed the reaction up.

  15. 15. A reaction gives 120 mL of gas in 40 seconds. When repeated with a catalyst, it gives the same 120 mL in 30 seconds. By how much has the average rate increased?

    1. From 3 to 4 mL per second
    2. From 4 to 3 mL per second
    3. From 30 to 40 mL per second
    4. It has not changed
    Show answer

    Answer: A. Without catalyst: 120 ÷ 40 = 3 mL per second. With catalyst: 120 ÷ 30 = 4 mL per second. The catalyst raised the rate from 3 to 4 mL per second.

Questions 1-3: lesson 1 (recognising chemical reactions). Questions 4-6: lesson 2 (writing and balancing equations). Questions 7-9: lesson 3 (types of reactions and the reactivity series). Questions 10-12: lesson 4 (oxidation, reduction, corrosion and rancidity). Questions 13-15: lesson 5 (energy changes and rate of reaction). Revisit the lesson for any group where you missed more than one question.

Privacy · Terms · Refunds · Delivery