• Practice
  • About 15 min
  • 5 practice questions

Acid-base titrations: finding concentration, purity and excess

Use the neutralisation relation with correct acidity and basicity, find the pH after mixing an excess of acid, calculate the purity of a sample, and choose an indicator.

If something looks wrong, please tell us.

A titration finds an unknown concentration by adding one solution of known concentration from a burette to another until the reaction is just complete. The end point is shown by an indicator. All the calculations come from a single idea: at neutralisation, the moles of H+ supplied equal the moles of OH- supplied.

The working relation

For an acid with n_a replaceable hydrogens per molecule (HCl 1, H2SO4 2, H3PO4 3) and a base with n_b hydroxide ions per formula unit (NaOH 1, Ca(OH)2 2), the end point is where n_a x M_a x V_a = n_b x M_b x V_b. It is a statement of equivalents, and the volume units cancel as long as both are the same.

At neutralisation: moles of H+ = moles of OH-. Multiply by the acidity or basicity before you compare.

— Rule to remember

Worked example 1: unknown concentration. 25.0 mL of NaOH solution is neutralised by 20.0 mL of 0.100 M HCl. Working: both are monovalent, so M_b x 25.0 = 0.100 x 20.0. M_b = 2.00 / 25.0 = 0.0800 M. Check: 20.0 mL of 0.100 M HCl is 2.00 mmol of H+, which needs 2.00 mmol of OH-; in 25.0 mL that is 0.0800 M. (Swapping the two volumes by mistake would give 0.125 M, which is wrong.)

Worked example 2: a dibasic acid. What volume of 0.10 M NaOH neutralises 20 mL of 0.10 M H2SO4? Working: H2SO4 gives 2 mmol per mmol of acid. Moles of H+ = 20 x 0.10 x 2 = 4.0 mmol. NaOH supplies 0.10 mmol per mL, so V = 4.0 / 0.10 = 40 mL. Equation check: H2SO4 + 2NaOH gives Na2SO4 + 2H2O, so 2.0 mmol of acid needs 4.0 mmol of base.

When one reagent is in excess

If the reagents are not in equal equivalents, one is left over. Subtract the smaller number of millimoles from the larger and divide by the total volume. For an excess of acid, that gives [H+], and pH = -log[H+].

Worked example 3: pH after mixing. 50 mL of 0.20 M HCl is added to 30 mL of 0.20 M NaOH. Working: H+ = 50 x 0.20 = 10 mmol; OH- = 30 x 0.20 = 6 mmol. Excess H+ = 4 mmol. Total volume = 80 mL. [H+] = 4 / 80 = 0.050 M. pH = -log(0.050) = 2 - log 5 = 2 - 0.70 = 1.30. If the base were in excess you would find [OH-], then pOH, then pH = 14 - pOH at room temperature.

Purity from a titration

Worked example 4: percentage purity. A 0.60 g sample containing sodium carbonate is dissolved and titrated with 0.50 M HCl, and 18.0 mL is needed to neutralise all the carbonate. The impurities do not react. Working: Na2CO3 + 2HCl gives 2NaCl + H2O + CO2. HCl used = 0.0180 x 0.50 = 0.00900 mol. Na2CO3 = 0.00900 / 2 = 0.00450 mol. Mass = 0.00450 x 106 = 0.477 g (molar mass 106 g/mol). Purity = 0.477 / 0.60 x 100 = 79.5 per cent.

Choosing an indicator

Indicator choice
TitrationSuitable indicatorWhy
Strong acid with strong baseMethyl orange or phenolphthaleinThe pH changes sharply from low to high around 7
Weak acid with strong basePhenolphthaleinThe end point lies on the basic side of 7
Strong acid with weak baseMethyl orangeThe end point lies on the acidic side of 7

Traps

  • Ignoring acidity or basicity. Doubling is easy to forget with H2SO4 and Ca(OH)2.
  • Using the volume of only one solution in the final concentration after mixing.
  • Applying pH = 14 - pOH when the question gives a different temperature.

Key takeaways: equate moles of H+ and OH-; account for excess before finding pH; for purity, go from titre to moles using the balanced equation, then to mass.

Check your understanding

  1. 1. 25.0 mL of NaOH is neutralised by 20.0 mL of 0.10 M HCl. What is the molarity of the NaOH?

    1. 0.080 M
    2. 0.125 M
    3. 0.10 M
    4. 0.050 M
    Show answer

    Answer: A. Moles of HCl = 2.0 mmol, and the NaOH has 2.0 mmol in 25.0 mL, so 0.080 M.

  2. 2. How many mL of 0.10 M NaOH neutralise 10 mL of 0.10 M H2SO4?

    1. 10 mL
    2. 40 mL
    3. 5 mL
    4. 20 mL
    Show answer

    Answer: D. H+ = 10 x 0.10 x 2 = 2.0 mmol, which needs 2.0 mmol OH-. V = 2.0 / 0.10 = 20 mL.

  3. 3. 50 mL of 0.20 M HCl is mixed with 30 mL of 0.20 M NaOH. What is the pH of the mixture?

    1. 1.0
    2. 2.0
    3. 0.30
    4. 1.3
    Show answer

    Answer: D. Excess H+ = 10 - 6 = 4 mmol in 80 mL = 0.050 M. pH = -log 0.050 = 1.30.

  4. 4. Which indicator is most suitable for titrating a weak acid with a strong base?

    1. Methyl orange
    2. Phenolphthalein
    3. Blue litmus only
    4. Universal indicator paper
    Show answer

    Answer: B. The end point lies above pH 7, where phenolphthalein changes colour.

  5. 5. What mass of NaOH (molar mass 40 g/mol) is needed to neutralise 0.050 mol of H2SO4?

    1. 4.0 g
    2. 2.0 g
    3. 1.0 g
    4. 8.0 g
    Show answer

    Answer: A. H2SO4 + 2NaOH: moles of NaOH = 0.100. Mass = 0.100 x 40 = 4.0 g.

Privacy · Terms · Refunds · Delivery