- Practice
- About 16 min
- 5 practice questions
Stoichiometry: masses, gas volumes, limiting reagent and yield
Use a balanced equation to calculate masses and gas volumes, find the limiting reagent, and work out percentage yield.
If something looks wrong, please tell us.
A balanced equation is a recipe in moles. Once you can balance (lessons 1 and 4), you can predict how much product a reaction gives, how much of each reactant is needed, and which reactant runs out first. This lesson covers the four standard calculations of competitive exams and the shortcuts that make them quick.
The three-step method
- Convert what you are given into moles: moles = mass ÷ molar mass, or moles = gas volume ÷ 22.4 L for a gas at STP (the textbook convention used in most problems).
- Use the coefficients of the balanced equation to convert moles of one substance into moles of another.
- Convert the answer back into the unit asked for: mass, volume or number of particles.
Useful molar masses (g/mol): H 1, C 12, N 14, O 16, Mg 24, Al 27, S 32, Cl 35.5, K 39, Ca 40, Zn 65. So CO2 = 44, H2O = 18, CaCO3 = 100, CaO = 56, NH3 = 17, KClO3 = 122.5.
Worked example 1: mass and volume from limestone
How much quicklime and how much CO2 (at STP) come from heating 50 g of CaCO3? CaCO3 → CaO + CO2. Moles CaCO3 = 50 ÷ 100 = 0.5. The ratio is 1 : 1 : 1, so 0.5 mol CaO = 0.5 × 56 = 28 g, and 0.5 mol CO2 = 0.5 × 22.4 = 11.2 L. Check by mass: 28 g + 0.5 × 44 g = 28 + 22 = 50 g, matching the law of conservation of mass.
Worked example 2: hydrogen from zinc
6.5 g of zinc reacts with excess dilute HCl: Zn + 2HCl → ZnCl2 + H2. Moles Zn = 6.5 ÷ 65 = 0.1, so 0.1 mol H2 = 0.1 × 22.4 = 2.24 L at STP. The word 'excess' tells you the acid does not limit the reaction.
The limiting reagent
When amounts of two reactants are given, one may run out first. That limiting reagent decides how much product forms; the other is in excess. Quick test: divide the moles of each reactant by its coefficient. The smallest quotient marks the limiting reagent.
Worked example 3: hydrogen and oxygen
4 g of H2 and 48 g of O2 react: 2H2 + O2 → 2H2O. Moles: H2 = 4 ÷ 2 = 2; O2 = 48 ÷ 32 = 1.5. Quotients: H2 2 ÷ 2 = 1, O2 1.5 ÷ 1 = 1.5. H2 has the smaller quotient, so it is limiting. 2 mol H2 gives 2 mol water = 36 g, using 1 mol O2. Left over: 0.5 mol O2 = 16 g. Check: 4 + 48 = 52 g = 36 g + 16 g.
Percentage yield
Real reactions often give less than the calculated amount. Percentage yield = actual yield ÷ theoretical yield × 100. For example, 28 g of N2 (1 mol) with excess H2 should give 2 mol NH3 by N2 + 3H2 → 2NH3, that is 34 g. If only 17 g is collected, the yield is 17 ÷ 34 × 100 = 50%.
Mass → moles → ratio from the equation → moles → answer. Divide moles by coefficients: the smallest is the limiting reagent. Yield % = actual ÷ theoretical × 100.
Key takeaways
Always balance first, then work in moles. Use 22.4 L per mole for gases at STP when a problem asks for it, find the limiting reagent before calculating product, and check your answer with conservation of mass.
Check your understanding
-
1. What mass of CO2 forms when 12 g of carbon burns completely in excess oxygen?
- 22 g
- 44 g
- 12 g
- 32 g
Show answer
Answer: B. C + O2 → CO2. 12 g C = 1 mol, giving 1 mol CO2 = 44 g.
-
2. What volume of oxygen at STP is needed to burn 16 g of methane completely?
- 22.4 L
- 11.2 L
- 67.2 L
- 44.8 L
Show answer
Answer: D. CH4 + 2O2 → CO2 + 2H2O. 16 g CH4 = 1 mol, needing 2 mol O2 = 2 × 22.4 = 44.8 L.
-
3. 3 mol of H2 and 2 mol of N2 react: N2 + 3H2 → 2NH3. Which statement is correct?
- H2 is the limiting reagent and 2 mol NH3 forms
- N2 is the limiting reagent and 4 mol NH3 forms
- Neither is in excess
- H2 is in excess and 2 mol NH3 forms
Show answer
Answer: A. Quotients: N2 2 ÷ 1 = 2, H2 3 ÷ 3 = 1. H2 is limiting; 3 mol H2 gives 2 mol NH3 and uses 1 mol N2, leaving 1 mol N2.
-
4. What mass of oxygen is released when 24.5 g of KClO3 (molar mass 122.5) decomposes completely: 2KClO3 → 2KCl + 3O2?
- 4.8 g
- 3.2 g
- 9.6 g
- 6.4 g
Show answer
Answer: C. Moles KClO3 = 24.5 ÷ 122.5 = 0.2. O2 = 0.2 × 3/2 = 0.3 mol = 0.3 × 32 = 9.6 g.
-
5. A reaction should give 20 g of product, but 15 g is obtained. What is the percentage yield?
- 133%
- 25%
- 50%
- 75%
Show answer
Answer: D. 15 ÷ 20 × 100 = 75%.
Sign in to keep track of the lessons you finish.