Revision notes

Chemical Reactions: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Balancing equations fast: fractions, odd-even and ionic equations

Metals, then non-metals, then H, then O; uncombined elements last. Use fractions for O2 and clear them at the end. Ionic equations must balance in charge as well as atoms.

— Rule to remember

Pick the method by the shape of the equation: fractions for combustion, odd-even when one side has an odd count, algebra when inspection keeps failing. Always finish with an element-by-element count and, for ionic equations, a charge count. Reduce to the smallest whole numbers before adding coefficients.

Read the full lesson

Lesson 2

Classifying reactions: overlaps, traps and tell-tale observations

Overlapping labels
LabelTestCan it also be redox?
CombinationTwo or more reactants, one productYes if an element takes part (2Mg + O2 → 2MgO); no for CaO + CO2 → CaCO3
DecompositionOne reactant, two or more productsYes for 2KClO3 → 2KCl + 3O2; no for CaCO3 → CaO + CO2
DisplacementAn element replaces another in a compoundAlways: the free element changes oxidation state
Double displacementTwo compounds exchange ionsNormally no: oxidation states do not change
CombustionBurning in oxygen, giving heat and lightAlways
Common precipitates
PrecipitateColourFormed by mixing, for example
AgClWhiteAgNO3 + NaCl
BaSO4WhiteBaCl2 + Na2SO4
PbI2YellowPb(NO3)2 + KI
Cu(OH)2BlueCuSO4 + NaOH
Fe(OH)2Dirty greenFeSO4 + NaOH
Fe(OH)3Reddish brownFeCl3 + NaOH

One reaction can carry several labels. If an uncombined element appears on either side, the reaction is redox; double displacement normally is not.

— Rule to remember

Classify by counting reactants and products, then ask whether any element is uncombined to decide on redox, and add exothermic or endothermic if asked. Learn the reactivity order and the six precipitate colours; together they answer most observation-based questions.

Read the full lesson

Lesson 3

Oxidation numbers: rules, agents and disproportionation

Oxidation number up = oxidised = reducing agent. Oxidation number down = reduced = oxidising agent. Electrons lost must equal electrons gained.

— Rule to remember

Apply the rules in priority order, write one short equation per unknown, and treat ions in a salt separately. Use the direction of change to name the agents, use highest and lowest states to predict what a species can do, and look for one element moving both up and down to spot disproportionation.

Read the full lesson

Lesson 4

Balancing redox equations: oxidation-number and half-reaction methods

Ratios worth remembering
Oxidant (acidic)Electrons gained per formulaFe2+ oxidised per formula
MnO4− → Mn2+55
Cr2O7^2− → 2Cr3+66

Electrons lost = electrons gained. In acid: balance O with H2O, H with H+, charge with electrons. MnO4− takes 5 electrons, Cr2O7^2− takes 6.

— Rule to remember

Use the oxidation-number method when you only need the ratio of oxidant to reductant, and the half-reaction method when you need the full equation with H+ and H2O. Always finish with an atom check and a charge check. The balanced equation gives the mole ratios used in redox titrations.

Read the full lesson

Lesson 5

Stoichiometry: masses, gas volumes, limiting reagent and yield

Mass → moles → ratio from the equation → moles → answer. Divide moles by coefficients: the smallest is the limiting reagent. Yield % = actual ÷ theoretical × 100.

— Rule to remember

Always balance first, then work in moles. Use 22.4 L per mole for gases at STP when a problem asks for it, find the limiting reagent before calculating product, and check your answer with conservation of mass.

Read the full lesson

Lesson 6

Concentration problems: molarity, dilution, mixing and percentage by mass

Concentration formulas
QuantityFormula
Amount of solute (mol)mass (g) / molar mass (g/mol)
Molarity, Mmoles of solute / volume of solution in litres
DilutionM1 x V1 = M2 x V2
Mixing two solutions of the same solute(M1V1 + M2V2) / (V1 + V2)
Percentage by mass(mass of solute / mass of solution) x 100
Parts per million, ppm(mass of solute / mass of solution) x 1,000,000

Work in moles. Dilution keeps the moles of solute constant: M1V1 = M2V2. Mixing adds the moles and adds the volumes.

— Rule to remember

Key takeaways: convert to moles; dilution keeps moles constant; mixing adds moles and volumes; percentage by mass to molarity needs density.

Read the full lesson

Lesson 7

Acid-base titrations: finding concentration, purity and excess

At neutralisation: moles of H+ = moles of OH-. Multiply by the acidity or basicity before you compare.

— Rule to remember
Indicator choice
TitrationSuitable indicatorWhy
Strong acid with strong baseMethyl orange or phenolphthaleinThe pH changes sharply from low to high around 7
Weak acid with strong basePhenolphthaleinThe end point lies on the basic side of 7
Strong acid with weak baseMethyl orangeThe end point lies on the acidic side of 7

Key takeaways: equate moles of H+ and OH-; account for excess before finding pH; for purity, go from titre to moles using the balanced equation, then to mass.

Read the full lesson

Lesson 8

Predicting products: gas tests, precipitate colours and thermal decomposition

Gases and their tests
GasTest or observation
Hydrogen, H2Burns with a squeaky pop with a lit splint
Oxygen, O2Relights a glowing splint
Carbon dioxide, CO2Turns limewater milky
Ammonia, NH3Pungent smell; turns damp red litmus blue
Chlorine, Cl2Greenish-yellow gas; bleaches damp litmus
Sulphur dioxide, SO2Choking smell; turns acidified potassium dichromate green
Hydrogen sulphide, H2SSmell of rotten eggs; blackens lead acetate paper
Common precipitates
PrecipitateColourNotes
AgClWhiteDissolves in dilute ammonia
AgBrPale yellow (cream)Sparingly soluble in dilute ammonia, dissolves in concentrated ammonia
AgIYellowDoes not dissolve in ammonia
BaSO4WhiteInsoluble even in acid
PbI2Bright yellowGolden crystals appear on cooling
Fe(OH)3Reddish-brownFrom iron(III) salts with alkali
Cu(OH)2Pale blueFrom copper(II) salts with alkali

Tests are only as good as the observation that goes with them: write the colour AND the solubility behaviour.

— Rule to remember

Key takeaways: learn the gas tests and the precipitate table; link each observation to one formula; balance decomposition equations by counting each element.

Read the full lesson

Lesson 9

Rates and equilibrium: rate laws, Le Chatelier tables and Q against K

Initial rate data (illustrative)
Experiment[A] (mol/L)[B] (mol/L)Rate (mol/L/s)
10.100.100.0020
20.200.100.0040
30.100.200.0080
Shifts for the ammonia equilibrium
ChangeShiftReason
Increase the pressureForwardFewer gas molecules on the right
Increase the temperatureBackwardThe forward reaction is exothermic
Remove NH3ForwardThe system makes up the loss
Add a catalystNo shiftBoth directions are speeded up equally
Add an inert gas at constant volumeNo shiftThe concentrations do not change

Pressure: shift towards fewer gas moles. Heat: raising temperature favours the endothermic direction. Catalysts never shift an equilibrium.

— Rule to remember

Key takeaways: compare two experiments to find the order; doubling concentration gives 2^order times the rate; use the table for shifts; use Q against K for numbers.

Read the full lesson

Privacy · Terms · Refunds · Delivery