Revision notes

Metals and Non-metals: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Physical properties of metals and non-metals

Metals: lustrous, malleable, ductile, sonorous, good conductors. Non-metals: dull, brittle, poor conductors. Know the exceptions: mercury, graphite, iodine, sodium.

— Remember
  • Metals are lustrous, malleable, ductile and conduct well.
  • Non-metals are dull, brittle and mostly poor conductors.
  • Remember the exceptions.
Read the full lesson

Lesson 2

Chemical properties: reactions with oxygen, water and acids

Metal oxides are basic (amphoteric: Al₂O₃, ZnO). Non-metal oxides are acidic. Metal + dilute acid gives salt + hydrogen, but not Cu, Ag, Au.

— Remember
  • Metal oxides: basic; non-metal oxides: acidic.
  • Reactivity with water decreases from Na to Fe; Cu, Ag, Au do not react.
  • Only metals above hydrogen displace it from acids.
Read the full lesson

Lesson 3

The reactivity series and displacement reactions

K Na Ca Mg Al Zn Fe Pb H Cu Hg Ag Au. A metal displaces any metal below it from its salt solution.

— Remember
  • Memorise the series.
  • A more reactive metal displaces a less reactive one.
  • Reactivity decides the method of extraction.
Read the full lesson

Lesson 4

Extraction of metals and ionic compounds

Highly reactive: electrolysis. Medium: roast or calcine, then reduce with carbon. Low: heating alone.

— Remember
  • Extraction method depends on reactivity.
  • Roasting for sulphides, calcination for carbonates.
  • Electrolysis for the most reactive metals.
Read the full lesson

Lesson 5

Corrosion, alloys and mixed practice

Common alloys
AlloyMade ofUse
BrassCopper and zincUtensils, decorative items
BronzeCopper and tinStatues, medals, bells
SteelIron and a little carbonConstruction, tools
Stainless steelIron, nickel and chromiumCutlery, surgical tools
SolderLead and tinJoining electrical wires

Rusting needs both oxygen and water. Prevent it with paint, oil, galvanisation or alloying.

— Remember
  • Rusting needs air and water.
  • Galvanisation, painting and alloying prevent corrosion.
  • Alloys are mixtures often stronger than pure metals.
Read the full lesson

Lesson 6

Ionic compounds: how they form and why they behave as they do

Formulas from ion charges
CationAnionWorkingFormula
Na⁺Cl⁻one eachNaCl
Mg²⁺Cl⁻one Mg²⁺ needs two Cl⁻MgCl₂
Mg²⁺O²⁻2 and 2 cancel to 1 and 1MgO
Al³⁺O²⁻3 × 2 = 2 × 3 = 6Al₂O₃

Metal + non-metal: electrons move from metal to non-metal. Ionic solids are brittle, have high melting points, and conduct only when molten or dissolved.

— Rule to remember
  • Ionic compounds form by transfer of electrons from a metal to a non-metal.
  • The formula makes total positive charge equal total negative charge.
  • Free-moving ions, not electrons, carry the current in molten or dissolved ionic compounds.
Read the full lesson

Lesson 7

Concentrating an ore: from mine to metal in three stages

Choosing a method
MethodPrincipleTypical use
Gravity separation (hydraulic washing)The ore is heavier than the gangue. A stream of water washes the light gangue away and the heavy ore settles.Oxide ores such as haematite
Magnetic separationOne of the two solids is attracted by a magnet.Ores containing magnetic iron minerals
Froth flotationSulphide ore particles are wetted by oil, not by water. Air is blown through, and the oily ore rises in the froth while gangue sinks.Sulphide ores of copper, zinc and lead
LeachingThe ore is dissolved in a chemical, leaving the gangue behind.Bauxite dissolved in sodium hydroxide solution to give aluminium compound in solution

Concentrate the ore, extract the metal, refine it. Froth flotation for sulphide ores, a flux (basic, such as CaO) to turn acidic silica into slag.

— Rule to remember
  • Gangue is the earthy waste mixed with an ore.
  • Gravity, magnetic, froth flotation and leaching are the four concentration methods.
  • A flux turns gangue into slag: CaO + SiO₂ → CaSiO₃.
Read the full lesson

Lesson 8

Iron and aluminium: the blast furnace and the electrolytic cell

Iron: haematite + coke + limestone, reduced by CO. Aluminium: alumina in molten cryolite, electrolysed, aluminium at the cathode.

— Rule to remember
  • Fe₂O₃ + 3CO → 2Fe + 3CO₂ is the key blast-furnace reaction.
  • Limestone gives lime, which combines with silica to form slag.
  • Aluminium is obtained at the cathode of a cell containing molten alumina and cryolite.
Read the full lesson

Lesson 9

Common non-metals: their properties, reactions and uses

Key facts
Non-metalKey properties and testsUses
HydrogenLightest gas; burns with a squeaky pop; formed when a metal reacts with dilute acidFuel, making ammonia, hardening vegetable oils
OxygenColourless gas; relights a glowing splinter; supports burning and respirationBreathing, welding, steel making
NitrogenColourless, fairly unreactive gas; makes up about four-fifths of airMaking ammonia and fertilisers, inert atmosphere in food packets
CarbonOccurs as diamond, graphite and fullerenes; burns to carbon dioxideFuel, pencils, cutting tools, reducing agent
SulphurYellow brittle solid, insoluble in water; burns with a blue flame to give SO₂Sulphuric acid, matches, vulcanising rubber
ChlorineGreenish-yellow poisonous gas; turns damp blue litmus red and then bleaches itDisinfecting water, bleaching
IodineShiny dark solid, sublimes to violet vapour; turns starch blue-blackAntiseptic (tincture of iodine)

Know one test or property for each non-metal: H₂ pops, O₂ relights a splinter, Cl₂ bleaches damp litmus, iodine turns starch blue-black.

— Rule to remember
  • Hydrogen, oxygen, nitrogen and chlorine are gases; sulphur and iodine are solids; carbon is a solid with several forms.
  • Non-metal oxides are usually acidic.
  • Use mole ratios from the balanced equation for mass questions.
Read the full lesson

Privacy · Terms · Refunds · Delivery