- Foundation
- About 14 min
- 5 practice questions
Concentrating an ore: from mine to metal in three stages
Describe how an ore is enriched by gravity separation, magnetic separation, froth flotation or leaching, and why a flux is added during smelting.
If something looks wrong, please tell us.
Ores do not come out of the ground as pure compounds. They are mixed with sand, clay and rock. Before a metal can be extracted, much of this waste must be removed. This lesson follows the whole route from mine to pure metal and explains the first stage, which is often forgotten.
Three stages of metallurgy
- Concentration (enrichment): removing the earthy impurities, called gangue, from the ore.
- Extraction: converting the ore into the metal, by roasting or calcination and then reduction, or by electrolysis.
- Refining: purifying the crude metal, for example by electrolytic refining.
Methods of concentration
| Method | Principle | Typical use |
|---|---|---|
| Gravity separation (hydraulic washing) | The ore is heavier than the gangue. A stream of water washes the light gangue away and the heavy ore settles. | Oxide ores such as haematite |
| Magnetic separation | One of the two solids is attracted by a magnet. | Ores containing magnetic iron minerals |
| Froth flotation | Sulphide ore particles are wetted by oil, not by water. Air is blown through, and the oily ore rises in the froth while gangue sinks. | Sulphide ores of copper, zinc and lead |
| Leaching | The ore is dissolved in a chemical, leaving the gangue behind. | Bauxite dissolved in sodium hydroxide solution to give aluminium compound in solution |
In froth flotation the finely powdered ore is mixed with water and a little pine oil. Air is blown in, and the ore particles are carried up in the froth, which is skimmed off. The method works because sulphide ores are not wetted by water but are wetted by oil.
Flux and slag
During smelting the gangue is often silica (SiO₂), which melts only at very high temperatures. A substance called a flux is added to turn it into a molten waste that floats on the metal. The waste is the slag. Silica is acidic, so a basic flux such as lime is used: CaO + SiO₂ → CaSiO₃. In the iron blast furnace the lime comes from limestone, which decomposes on heating: CaCO₃ → CaO + CO₂.
Worked examples
Example 1. Which concentration method suits a copper sulphide ore mixed with sand? A sulphide ore is wetted by oil and not by water, so froth flotation is used. The oily ore rises with the froth, and the sand sinks.
Example 2. An ore sample of 200 g contains 35% gangue by mass (an illustrative figure). What mass of useful mineral is present? Gangue = 35% of 200 g = 70 g. Useful mineral = 200 − 70 = 130 g, which is 65%.
Example 3. Why is limestone added to the blast furnace? Heat turns limestone into lime (CaCO₃ → CaO + CO₂). Lime combines with the silica impurity (CaO + SiO₂ → CaSiO₃) to form molten slag, which is removed separately from the molten iron.
Example 4. Why is the same method not used for every ore? The methods use different physical differences: density, magnetism, wetting or solubility. The best choice is the property in which ore and gangue differ most.
Concentrate the ore, extract the metal, refine it. Froth flotation for sulphide ores, a flux (basic, such as CaO) to turn acidic silica into slag.
Key takeaways
- Gangue is the earthy waste mixed with an ore.
- Gravity, magnetic, froth flotation and leaching are the four concentration methods.
- A flux turns gangue into slag: CaO + SiO₂ → CaSiO₃.
Check your understanding
-
1. The unwanted earthy material mixed with an ore is called
- flux
- slag
- gangue
- mineral
Show answer
Answer: C. Gangue is the earthy impurity mixed with the ore. Flux is added to remove it, and slag is the waste that forms.
-
2. Which method is mainly used to concentrate sulphide ores?
- Froth flotation
- Magnetic separation
- Hydraulic washing
- Crystallisation
Show answer
Answer: A. Sulphide ore particles are wetted by oil, so they rise in the froth when air is blown through the mixture.
-
3. In the blast furnace, calcium oxide acts as a flux by reacting with
- carbon monoxide gas
- silica present as gangue
- oxygen from the hot air blast
- molten iron produced
Show answer
Answer: B. Calcium oxide is basic and silica is acidic; they combine to give calcium silicate slag, CaO + SiO₂ → CaSiO₃.
-
4. A 500 g ore sample contains 40% gangue (illustrative). What mass of useful mineral does it contain?
- 200 g
- 350 g
- 250 g
- 300 g
Show answer
Answer: D. Gangue is 0.40 × 500 = 200 g, so the useful mineral is 500 − 200 = 300 g.
-
5. What is the correct order of the stages of metallurgy?
- Refining, extraction, concentration
- Concentration, refining, extraction
- Extraction, concentration, refining
- Concentration, extraction, refining
Show answer
Answer: D. The ore is first concentrated, then the metal is extracted, and finally the crude metal is refined.
Sign in to keep track of the lessons you finish.