- Foundation
- About 14 min
- 5 practice questions
Extraction of metals and ionic compounds
Learn how metals are extracted depending on their reactivity: roasting, calcination, reduction and electrolysis.
If something looks wrong, please tell us.
Most metals occur combined with other elements as minerals in the Earth's crust. The method used to get a metal out depends on how reactive it is. Minerals from which a metal can be extracted profitably are called ores.
Three groups of metals
- Low reactivity (below copper, e.g. gold, silver): found free or easily obtained by heating. Mercury is obtained by heating its sulphide, cinnabar (HgS): 2HgS + 3O₂ → 2HgO + 2SO₂, then 2HgO → 2Hg + O₂.
- Medium reactivity (Zn, Fe, Pb, Cu): found as sulphides or carbonates. First converted to oxides, then reduced with carbon.
- High reactivity (K, Na, Ca, Mg, Al): extracted by electrolysis of their molten chlorides or oxides, since carbon cannot reduce them. For example, sodium is obtained at the cathode on electrolysing molten NaCl.
Roasting and calcination
Roasting is heating a sulphide ore strongly in excess air: 2ZnS + 3O₂ → 2ZnO + 2SO₂. Calcination is heating a carbonate ore strongly in limited air: ZnCO₃ → ZnO + CO₂. Then the oxide is reduced: ZnO + C → Zn + CO.
Refining
The most widely used method of refining an impure metal is electrolytic refining. For copper, the impure metal is the anode, a thin strip of pure copper is the cathode, and the electrolyte is acidified copper sulphate solution. Pure copper deposits on the cathode, while impurities collect below the anode as anode mud.
Worked examples
Example 1. Which method would you use for aluminium? Aluminium is highly reactive, so electrolysis of molten aluminium oxide is used.
Example 2. How is zinc carbonate converted to zinc? First calcination: ZnCO₃ → ZnO + CO₂. Then reduction with carbon: ZnO + C → Zn + CO.
Example 3. Why can carbon not reduce sodium oxide? Sodium has a stronger affinity for oxygen than carbon does, so carbon cannot take the oxygen away.
Highly reactive: electrolysis. Medium: roast or calcine, then reduce with carbon. Low: heating alone.
Key takeaways
- Extraction method depends on reactivity.
- Roasting for sulphides, calcination for carbonates.
- Electrolysis for the most reactive metals.
Check your understanding
-
1. Heating zinc carbonate strongly in limited air to form zinc oxide is called:
- Roasting
- Electrolytic refining
- Calcination
- Reduction
Show answer
Answer: C. Calcination is heating a carbonate ore strongly in limited air: ZnCO₃ → ZnO + CO₂. Roasting is for sulphide ores in excess air.
-
2. Which gas is given off when zinc sulphide is roasted?
- Carbon dioxide
- Hydrogen
- Sulphur dioxide
- Hydrogen sulphide
Show answer
Answer: C. Roasting: 2ZnS + 3O₂ → 2ZnO + 2SO₂. The sulphur leaves as sulphur dioxide.
-
3. How is sodium metal obtained?
- By electrolysis of molten sodium chloride; sodium forms at the cathode
- By heating sodium oxide with carbon
- By heating sodium chloride alone
- By displacing it from salt solution with iron
Show answer
Answer: A. Sodium is highly reactive, so carbon cannot reduce its compounds. It is obtained by electrolysis of molten NaCl, with sodium deposited at the cathode.
-
4. In the electrolytic refining of copper, where do the impurities collect?
- On the cathode with the pure copper
- On the surface of the electrolyte as a gas
- Inside the pure copper strip
- Below the anode, as anode mud
Show answer
Answer: D. The impure copper anode dissolves; pure copper deposits on the cathode, while insoluble impurities settle below the anode as anode mud.
-
5. Why can carbon not reduce sodium oxide to sodium?
- Sodium oxide does not contain oxygen
- Sodium has a stronger affinity for oxygen than carbon has
- Carbon is more reactive than sodium
- Sodium oxide is a gas
Show answer
Answer: B. To reduce an oxide, carbon must take its oxygen. Sodium holds oxygen more strongly than carbon does, so electrolysis is used instead.
Sign in to keep track of the lessons you finish.