• Practice
  • About 16 min
  • 5 practice questions

Earthquake and tsunami numericals

Compare earthquakes by magnitude difference, find distance from the S-P interval, and estimate tsunami speed and arrival time.

If something looks wrong, please tell us.

Earthquake and tsunami questions in competitive exams often include a number: how many times stronger, how far away, how long until the wave arrives. The arithmetic is simple once you know three relationships. All speeds and distances in this lesson are illustrative round numbers chosen for easy working.

Magnitude differences

The magnitude scale is logarithmic. A difference of d whole units multiplies the recorded amplitude by 10 to the power d and the energy by about 31.6 to the power d (exactly 10 to the power 1.5d). Learn the common cases, because recalculating wastes time.

Speed table
Magnitude differenceAmplitude ratioEnergy ratio (about)
0.5about 3.2about 5.6
11031.6 (about 32)
21001,000
31,00031,600 (about 32,000)

Two traps appear again and again. First, a magnitude 6 earthquake is not 'twice' a magnitude 3; it is 1,000 times the amplitude and about 32,000 times the energy. Second, a question asking about energy will usually offer the amplitude ratio as a wrong option, and the reverse.

Locating an earthquake from the S-P interval

P-waves travel faster than S-waves, so a station records the P-wave first and the S-wave some seconds later. The longer the gap, the farther the earthquake. If the P-wave speed is vp and the S-wave speed vs, the distance d satisfies d ÷ vs − d ÷ vp = t, where t is the S-P interval. With illustrative speeds of 8 km/s for P and 4 km/s for S, d × (1/4 − 1/8) = t, so d = 8t: each second of gap means 8 km. One station gives only the distance, a circle around the station; three stations give three circles that meet at one point, which locates the epicentre. This is called triangulation.

Worked example 1: distance from the gap

Using the illustrative speeds above, a station records an S-P interval of 25 seconds. Step 1: d = 8 × 25 = 200 km. Step 2: check by travel times: the P-wave takes 200 ÷ 8 = 25 s, the S-wave 200 ÷ 4 = 50 s, and 50 − 25 = 25 s, which matches. The earthquake is 200 km away, but its direction is unknown until two more stations report.

Tsunami speed and travel time

In the open ocean a tsunami behaves as a shallow-water wave because its wavelength is far greater than the ocean depth, so its speed is the square root of g × depth. Taking g as 10 m/s² for easy arithmetic, in water 4,000 m deep the speed is the square root of 40,000, which is 200 m/s or 720 km/h, about the speed of a jet aircraft. As the depth falls near the coast, the wave slows, the waves behind catch up, and the height rises sharply.

Worked example 2: how long until the wave arrives?

An undersea earthquake occurs 1,440 km from a coast across ocean that averages 4,000 m deep. Step 1: speed = 720 km/h, from the calculation above. Step 2: time = 1,440 ÷ 720 = 2 hours. Step 3: this two-hour window is the lead time available to warn the coast. For an earthquake only 36 km offshore the time would be about 3 minutes, which is why people near the coast must treat strong shaking itself as the warning.

Magnitude: each unit is 10 times the amplitude and about 32 times the energy. S-P gap: with P at 8 and S at 4 km/s, distance = 8 × gap. Tsunami speed = square root of (g × depth).

— Formulas to remember

Key takeaways

Keep the amplitude and energy ratios separate and memorise the table. Use the S-P interval for distance and three stations for location. Tsunami speed depends on ocean depth, so deep oceans carry tsunamis at jet-like speeds, giving distant coasts hours of warning but nearby coasts only minutes.

Check your understanding

  1. 1. How many times greater is the energy released by a magnitude 7.0 earthquake than a magnitude 5.0, approximately?

    1. About 100 times
    2. About 2 times
    3. About 1,000 times
    4. About 63 times
    Show answer

    Answer: C. Energy grows about 31.6 times per unit; two units give 31.6 × 31.6 ≈ 1,000. The amplitude ratio would be 100, a common wrong option.

  2. 2. With illustrative speeds of 8 km/s (P) and 4 km/s (S), a station records an S-P interval of 15 seconds. How far away is the earthquake?

    1. 120 km
    2. 60 km
    3. 30 km
    4. 180 km
    Show answer

    Answer: A. Distance = 8 × gap = 8 × 15 = 120 km. Check: P takes 15 s, S takes 30 s, difference 15 s.

  3. 3. Why are at least three seismograph stations needed to locate an epicentre?

    1. Each station measures a different magnitude
    2. One station gives the direction, two give the depth
    3. Each station gives only a distance (a circle); three circles meet at one point
    4. Three stations are needed to measure intensity
    Show answer

    Answer: C. A single S-P interval gives distance but not direction. Circles from three stations intersect at the epicentre.

  4. 4. Taking g = 10 m/s², what is the speed of a tsunami in ocean 1,000 m deep?

    1. 360 km/h
    2. 100 km/h
    3. 1,000 km/h
    4. 36 km/h
    Show answer

    Answer: A. Speed = √(10 × 1,000) = √10,000 = 100 m/s. Converting, 100 m/s × 3.6 = 360 km/h. The option 100 km/h forgets to convert from metres per second.

  5. 5. A magnitude 6.5 earthquake is compared with a magnitude 6.0. The amplitude ratio is about:

    1. 5
    2. 10
    3. 1.5
    4. 3.2
    Show answer

    Answer: D. A difference of 0.5 gives 10^0.5 ≈ 3.16 times the amplitude. Energy would be about 10^0.75 ≈ 5.6 times.

Privacy · Terms · Refunds · Delivery