- Practice
- About 14 min
- 5 practice questions
Risk vocabulary: traps and quick comparisons
Avoid the common confusions between hazard, exposure, vulnerability, capacity and resilience, and rank places by illustrative risk scores.
If something looks wrong, please tell us.
Most wrong answers in disaster management questions come from mixing up words that sound alike. Examiners know this, so they build options around the confusion: an option that describes exposure when the question asks about vulnerability, or one that treats a hazard as a disaster. This lesson sharpens the vocabulary into exam-ready distinctions and shows quick ways to compare risk with illustrative scores.
The trap pairs
| Often confused | The difference |
|---|---|
| Hazard vs disaster | A hazard is a potential source of harm; a disaster is serious disruption when a hazard meets a community that cannot cope with its own resources |
| Exposure vs vulnerability | Exposure is being in the hazard's path; vulnerability is how easily what is exposed gets harmed |
| Vulnerability vs capacity | Vulnerability raises the harm; capacity (skills, resources, institutions) reduces it |
| Capacity vs resilience | Capacity is the stock of strengths; resilience is the ability to resist, absorb, adapt to and recover from a hazard quickly |
| Risk vs hazard | Risk is the likely loss in future, which combines the hazard with exposure, vulnerability and capacity |
Another frequent trap is the phrase 'natural disaster'. The hazard may be natural, but whether it becomes a disaster depends on human choices: where people live, how they build, whether they are warned. That is why many textbooks prefer 'disaster caused by a natural hazard'. If an option says a disaster depends only on the size of the hazard, it is almost always the wrong one.
Risk as a relationship
The working relationship is Risk = Hazard × Vulnerability ÷ Capacity. Some versions write exposure as a separate factor: Risk = Hazard × Exposure × Vulnerability ÷ Capacity. In both, the factors multiply, which gives two speed rules. First, if any multiplying factor is zero, risk is zero: a strong hazard with no one exposed carries no disaster risk. Second, a percentage change in one factor changes risk by the same proportion: cutting vulnerability by a quarter cuts risk by a quarter, other things equal.
Worked example 1: rank three districts
Illustrative scores (hazard, vulnerability, capacity): district P (9, 4, 6), district Q (5, 6, 2), district R (7, 3, 3). Step 1, P: 9 × 4 ÷ 6 = 36 ÷ 6 = 6. Step 2, Q: 5 × 6 ÷ 2 = 30 ÷ 2 = 15. Step 3, R: 7 × 3 ÷ 3 = 7. Ranking: Q (15), R (7), P (6). The trap is to pick P because it has the highest hazard score. Q has the weakest hazard but the highest risk because its people are vulnerable and its capacity is low, so it should be first in line for help.
Worked example 2: what changes risk most?
District Q above has risk 15. Option 1 raises capacity from 2 to 3. Option 2 lowers vulnerability from 6 to 5. Which helps more? Step 1, option 1: 5 × 6 ÷ 3 = 10, a fall of 5. Step 2, option 2: 5 × 5 ÷ 2 = 12.5, a fall of 2.5. Step 3: raising capacity by one point helps more here because capacity is small, so each point is a large share of it. Speed method: compare proportional changes. Capacity rises by 50 per cent (risk becomes two-thirds), vulnerability falls by about 17 per cent (risk becomes five-sixths), so option 1 wins without full calculation.
Risk multiplies hazard, exposure and vulnerability and divides by capacity. Zero exposure means zero risk; a proportional change in any factor changes risk in the same proportion.
Key takeaways
Read the question for the exact concept it names, then eliminate options that describe a neighbouring concept. Remember that disasters are not purely natural. When comparing places, compute or estimate H × V ÷ C rather than looking at the hazard alone, and use proportional reasoning to judge which intervention cuts risk most.
Check your understanding
-
1. A fishing hamlet sits on a low sandbar facing the sea. Which term describes the fact that it lies in the path of storm surges?
- Exposure
- Vulnerability
- Resilience
- Capacity
Show answer
Answer: A. Being located where the hazard can reach is exposure. Vulnerability would describe how easily the hamlet's houses and people are harmed.
-
2. Which statement about 'natural disasters' is most accurate?
- Disasters depend only on the size of the natural event
- Natural hazards always become disasters
- The hazard may be natural, but whether it becomes a disaster depends on human factors like vulnerability and preparedness
- Human action can never change disaster losses
Show answer
Answer: C. A natural hazard becomes a disaster only when it meets vulnerable, unprepared people; human choices shape the outcome.
-
3. Illustrative scores: hazard 8, vulnerability 3, capacity 4. Which change gives the larger fall in risk?
- Lowering vulnerability from 3 to 2.5
- Raising capacity from 4 to 6
- Both give the same fall
- Neither changes risk
Show answer
Answer: B. Risk starts at 8 × 3 ÷ 4 = 6. Capacity 6 gives 24 ÷ 6 = 4, a fall of 2. Vulnerability 2.5 gives 20 ÷ 4 = 5, a fall of 1.
-
4. Resilience is best described as:
- The strength of the hazard
- Being located in a hazard zone
- The total cost of a disaster
- The ability to resist, absorb, adapt to and recover quickly from the effects of a hazard
Show answer
Answer: D. Resilience is about bouncing back: resisting, absorbing, adapting and recovering. Exposure is location; hazard strength is a property of the hazard.
-
5. Using Risk = Hazard × Exposure × Vulnerability ÷ Capacity, what is the disaster risk for a severe hazard in an area where no people or assets are exposed?
- Very high, because the hazard is severe
- Equal to the hazard score
- It cannot be found without the capacity
- Zero
Show answer
Answer: D. Exposure multiplies the other factors, so if exposure is zero the product, and hence the risk, is zero.
Sign in to keep track of the lessons you finish.