• Foundation
  • About 14 min
  • 5 practice questions

Liquid waste: sewage and the stages of wastewater treatment

Describe what sewage is, name the primary, secondary and tertiary stages of treatment, explain BOD in plain words, and do simple percentage-removal sums.

If something looks wrong, please tell us.

Not all waste is solid. Every home sends used water down the drain from kitchens, bathrooms and toilets, and factories send out water used in their processes. This is liquid waste, and when it contains human waste it is called sewage. Untreated, it can spread disease and pollute rivers and groundwater. This lesson explains what sewage contains and how it is cleaned. The numbers are illustrative, chosen to keep the arithmetic simple.

What is in wastewater?

Household wastewater is mostly water, with small amounts of dissolved and floating material: food scraps, soap, oils, human waste, and microbes, including germs that cause disease. Factory wastewater may also hold chemicals, metals or dyes. The main environmental worry with sewage is the large amount of organic matter it carries. When that organic matter reaches a river, microbes feed on it and use up the oxygen dissolved in the water. Fish and other water animals then suffer or die.

BOD: how strong is the waste?

To describe how polluting wastewater is, we measure its biochemical oxygen demand (BOD): the amount of dissolved oxygen that microbes use up while breaking down the organic matter in the water, usually measured in milligrams of oxygen per litre. The higher the BOD, the more organic matter, and the more harm to a river if it is discharged. Clean river water has a low BOD; raw sewage has a high one.

Stages of treatment

From dirty to clean
StageWhat happensWhat it removes
PreliminaryScreens and grit chambers catch rags, plastic, sticks and sandLarge and heavy objects
PrimaryWater rests in a tank so solids settle as sludge and oil and grease float to the top and are skimmedSettleable solids and some organic matter
SecondaryMicrobes are given air and feed on the dissolved organic matterMost of the BOD
TertiaryExtra cleaning such as filtration or disinfection (for example with chlorine or ultraviolet light)Remaining germs and nutrients

The sludge that settles is also treated, often by digesting it without air, which makes biogas, and then used as manure or disposed of safely. Villages and small buildings without a sewer often use a septic tank, a sealed underground tank where solids settle and microbes begin to break them down, while the liquid soaks away into the ground through a soak pit.

Preliminary: screens and grit. Primary: settling. Secondary: microbes digest dissolved organic matter. Tertiary: polishing and disinfection. BOD shows how much organic matter water carries.

Worked example 1: how much is removed?

Raw sewage has a BOD of 200 mg/L. Primary treatment removes 30 per cent of it. BOD after primary = 200 × 0.70 = 140 mg/L. Secondary treatment removes 90 per cent of what is left. BOD after secondary = 140 × 0.10 = 14 mg/L. Total removal = (200 − 14) ÷ 200 = 0.93, which is 93 per cent. Notice that you cannot just add 30 and 90: each stage works on what the stage before left behind.

Worked example 2: how much sewage?

Suppose each person in a town sends 100 litres of wastewater to the sewer each day, and the town has 20,000 people. Total = 20,000 × 100 = 2,000,000 litres a day. Since 1 cubic metre is 1,000 litres, this is 2,000 cubic metres a day. A treatment plant must be built for at least this much flow, and a larger plant for a growing population.

Why treat it?

Treatment protects health, because untreated sewage carries the germs of diseases such as cholera and typhoid, and protects rivers and lakes. The treated water can be reused for gardens, industry or cooling, which saves fresh water.

Key takeaways

Liquid waste comes from homes and industry. Sewage contains organic matter, which uses up oxygen in water, measured as BOD. Treatment runs through preliminary, primary, secondary and tertiary stages, and each stage works on what the previous one left.

Check your understanding

  1. 1. Which stage of sewage treatment uses microbes with air to digest dissolved organic matter?

    1. Primary treatment
    2. Secondary treatment
    3. Preliminary screening
    4. Tertiary disinfection
    Show answer

    Answer: B. Secondary treatment gives microbes air and food, so they remove most of the BOD. Primary treatment only lets solids settle.

  2. 2. What does BOD measure?

    1. The amount of salt that is dissolved in water
    2. The number of fish living in a river
    3. The heat given off by treated sewage
    4. Oxygen microbes use to digest organic matter
    Show answer

    Answer: D. BOD is the biochemical oxygen demand. A high value means much organic matter, which can use up the oxygen that water animals need.

  3. 3. Raw sewage has a BOD of 240 mg/L. Primary treatment removes 25 per cent. What is the BOD after primary treatment?

    1. 180 mg/L
    2. 60 mg/L
    3. 215 mg/L
    4. 25 mg/L
    Show answer

    Answer: A. Removed = 240 × 0.25 = 60 mg/L. Left = 240 − 60 = 180 mg/L.

  4. 4. A town of 5,000 people sends 100 litres of wastewater per person each day to the sewer. What is the daily flow?

    1. 50 cubic metres
    2. 5,000 cubic metres
    3. 500 cubic metres
    4. 0.5 cubic metres
    Show answer

    Answer: C. 5,000 × 100 = 500,000 litres = 500 cubic metres, since 1 cubic metre is 1,000 litres.

  5. 5. What happens in the primary stage of treatment?

    1. Chlorine kills all the germs in the water
    2. Microbes digest the dissolved waste with air
    3. Large objects are caught by a screen
    4. Solids settle as sludge and oil floats up
    Show answer

    Answer: D. In primary treatment the water rests in a tank. Solids settle as sludge and floating oil is skimmed off.

Privacy · Terms · Refunds · Delivery