• Foundation
  • About 13 min
  • 5 practice questions

Recycling materials: paper, glass, metal and plastic codes

Explain how paper, glass, metals and plastics are recycled, read the plastic resin codes 1 to 7, say why clean, dry and sorted material matters, and calculate a recovery share.

If something looks wrong, please tell us.

Recycling means turning used materials into new products. It saves raw materials and energy and reduces the waste that must be disposed of. But each material is recycled differently and each has its own problems. This lesson goes through the four common dry materials. The percentages are illustrative, because real recovery rates depend on the place and the quality of sorting.

Paper

Paper is made of plant fibres. To recycle it, used paper is soaked and pulped, inks and glue are removed, and the fibres are made into new paper. Fibres get shorter each time they are recycled, so paper can be recycled only a limited number of times. Paper that is greasy, wet or mixed with food cannot be recycled well, so a used pizza box or a paper plate with food stuck to it is better composted than sent for recycling.

Glass

Glass is made from sand and other minerals melted at high temperature. Used glass is sorted by colour, crushed into small pieces called cullet, and melted to make new bottles and jars. Glass can be recycled again and again without losing quality. Ceramics, mirrors and window glass melt at different temperatures and must not be mixed with bottle glass.

Metals

Metals such as aluminium, steel and copper are melted and cast again. Metals can also be recycled many times, and recycling them uses much less energy than extracting new metal from ore. Steel can be separated from other waste with a magnet, which makes sorting easy.

Plastics and the resin codes

There are many kinds of plastic and they cannot be mixed in recycling. Most plastic items carry a number from 1 to 7 inside a triangle, which tells which plastic it is made of. The number identifies the plastic and does not by itself mean that it will be accepted for recycling in your area.

Plastic resin codes
CodePlasticCommon use
1PET (polyethylene terephthalate)Water and soft drink bottles
2HDPE (high-density polyethylene)Milk cans, detergent bottles
3PVC (polyvinyl chloride)Pipes, some packaging
4LDPE (low-density polyethylene)Carry bags, films
5PP (polypropylene)Containers, bottle caps
6PS (polystyrene)Disposable cups, foam trays
7OtherMixed or special plastics

Clean, dry and sorted material recycles well; food, oil and mixing spoil it. Codes 1 to 7 name the plastic; they do not guarantee recycling.

Worked example 1: a week of dry waste

A household produces 10 kg of dry waste in a week: 4 kg paper, 3 kg plastic, 2 kg glass and 1 kg metal. Suppose the recovery rates are 80 per cent for paper, 50 per cent for plastic, 90 per cent for glass and 95 per cent for metal. Recovered = 4 × 0.80 + 3 × 0.50 + 2 × 0.90 + 1 × 0.95 = 3.2 + 1.5 + 1.8 + 0.95 = 7.45 kg. Recovery share = 7.45 ÷ 10 = 0.745, which is 74.5 per cent. The part that is not recovered, 2.55 kg, goes to disposal.

Worked example 2: from waste paper to new paper

A school collects 500 kg of waste paper in a term, and suppose 80 per cent of the fibre is recovered in the recycling process. New paper stock = 500 × 0.80 = 400 kg, and the other 100 kg is lost as ink, dirt and short fibres. If the school had thrown away the 500 kg, that much would have gone to the landfill. Notice that the recovery rate is a share of the waste that goes in, not of the paper that is made.

Why quality matters

A recycler needs a clean, steady supply. A greasy wrapper can spoil a whole bale of paper. A bottle with food in it, or a mix of different plastics, lowers the value and may mean the whole load is rejected. So the best habit is to rinse containers, keep paper dry, and put each material in its own bag. Segregation at source is what makes recycling work.

Key takeaways

Paper is pulped, glass is crushed and melted, and metals are melted and cast. Plastics must be sorted by type, and the codes 1 to 7 name the plastic. Clean, dry and separated materials recycle well. A recovery share is the recovered amount divided by the amount of waste.

Check your understanding

  1. 1. A recycling code of 1 inside a triangle on a drink bottle usually stands for:

    1. HDPE, the plastic of milk cans
    2. PVC, the plastic of rigid pipes
    3. PET, the plastic of drink bottles
    4. PS, the plastic of foam trays
    Show answer

    Answer: C. Code 1 is PET, widely used for water and soft drink bottles. Code 2 is HDPE, 3 is PVC and 6 is PS.

  2. 2. Which material can be recycled again and again without losing its quality?

    1. Glass
    2. Paper
    3. Plastic films
    4. Food-stained card
    Show answer

    Answer: A. Glass can be melted and reformed many times without loss of quality. Paper fibres get shorter each time.

  3. 3. 500 kg of waste paper goes into a recycling process that recovers 80 per cent of the fibre. How much recovered paper stock results?

    1. 100 kg
    2. 625 kg
    3. 420 kg
    4. 400 kg
    Show answer

    Answer: D. Recovered = 500 × 0.80 = 400 kg. The remaining 100 kg is lost.

  4. 4. A household has 6 kg of paper (75 per cent recovered) and 4 kg of plastic (50 per cent recovered). What share of the 10 kg is recovered?

    1. 62.5 per cent
    2. 65 per cent
    3. 100 per cent
    4. 35 per cent
    Show answer

    Answer: B. Recovered = 6 × 0.75 + 4 × 0.50 = 4.5 + 2.0 = 6.5 kg, which is 65 per cent of 10 kg. The simple average of 75 and 50 would be wrong.

  5. 5. Why should recyclable containers be rinsed and kept dry?

    1. Food and oil can spoil the whole batch
    2. Water makes plastic melt more quickly
    3. Rinsing turns the plastic into glass
    4. Dry material is heavier and so costs more
    Show answer

    Answer: A. Contamination by food or grease can make a load unacceptable to a recycler, so clean, dry material keeps its value.

Privacy · Terms · Refunds · Delivery