• Foundation
  • About 12 min
  • 5 practice questions

Groundwater, water conservation and rainwater harvesting

Explain the water table, the danger of over-extracting groundwater and how rainwater harvesting and watershed work help.

If something looks wrong, please tell us.

Groundwater is rainwater that has soaked into the ground and fills the spaces between soil and rock. The upper surface of this saturated zone is called the water table. Wells reach down to it. If more water is taken than rain refills, the water table falls.

Problem of over-use

When many tube wells pump water faster than it is replaced, the water table sinks. Wells run dry, pumping needs more energy, and in some places the water becomes poor in quality. This is the reason for water conservation.

Ways to conserve water

  • Rainwater harvesting: collecting rain from roofs or fields and storing it or letting it sink into the ground.
  • Recharge pits and check dams: slow runoff so it soaks in.
  • Efficient irrigation: drip and sprinkler methods.
  • Crop choice: growing less thirsty crops in dry regions.
  • Watershed management: treating the whole catchment with trees, bunds and ponds.

Worked example 1: simple harvesting

Rain falls on a roof, runs into a pipe and flows into a pit that lets it soak into the soil. This refills the aquifer, so it is rainwater harvesting with recharge.

Worked example 2: why the water table falls

Suppose a village pumps more water each year than rain returns to the ground. The store shrinks, so the water table drops. The cause is extraction exceeding recharge.

Take no more from the ground than the rain puts back; harvest rain to refill it.

— Remember
  • Groundwater is stored rainwater; the water table is its top level.
  • Over-extraction lowers the water table.
  • Rainwater harvesting, recharge and efficient irrigation conserve water.

Check your understanding

  1. 1. What is the water table?

    1. The upper surface of the zone where the ground is saturated with water
    2. The level of water in a river at its flood stage in the monsoon
    3. The depth of a canal below the ground level of the field
    4. The top of the embankment of a tank, measured from the field
    Show answer

    Answer: A. Groundwater fills spaces in soil and rock; the top of this saturated zone is the water table. Wells reach down to it.

  2. 2. Why does the water table fall in an area?

    1. Rain puts back more water than is pumped out
    2. Farmers harvest rainwater
    3. More water is pumped out than rain puts back
    4. Check dams are built on streams
    Show answer

    Answer: C. If extraction is greater than recharge, the store of groundwater shrinks and the water table drops.

  3. 3. Rain from a roof runs through a pipe into a pit where it soaks into the soil. What is this?

    1. Flood irrigation
    2. Rainwater harvesting with recharge
    3. Over-extraction of groundwater
    4. An inundation canal
    Show answer

    Answer: B. Collecting rain and letting it sink into the ground refills the aquifer, which is rainwater harvesting with recharge.

  4. 4. What is a check dam for?

    1. To generate electricity for towns and villages near the stream
    2. To carry water to distant plains through long canals from the river
    3. To drain extra water out of fields into the nearest stream
    4. To slow running water so that more of it soaks into the ground
    Show answer

    Answer: D. A check dam slows runoff on a stream, giving water time to seep in and recharge the groundwater.

  5. 5. Which of these does NOT conserve water?

    1. Watershed management of the whole catchment
    2. Sinking more tube wells to pump water faster
    3. Growing less thirsty crops in dry regions
    4. Using drip and sprinkler irrigation
    Show answer

    Answer: B. Pumping faster lowers the water table. The other three save water or help it recharge.

Privacy · Terms · Refunds · Delivery