- Foundation
- About 12 min
- 5 practice questions
River pollution and river conservation
Name the main sources and effects of river pollution and describe measures to clean and protect rivers, with simple load calculations.
If something looks wrong, please tell us.
A river can clean itself to some extent, because moving water mixes in oxygen and tiny organisms break down waste. But when too much waste enters, the river can no longer cope. Rivers that pass through towns and farmland are especially at risk. This lesson shows what pollutes rivers, what harm results and how to protect them. Numbers are illustrative.
Sources of pollution
- Domestic sewage: untreated waste from homes and towns, the largest source in many places.
- Industrial effluents: liquid waste from factories, which may carry chemicals and heavy metals.
- Agricultural runoff: rain carries fertiliser and pesticide from fields into streams.
- Solid waste: plastic, garbage and building debris dumped on banks or in the water.
- Thermal pollution: warm water from power plants and factories lowers the oxygen in the river.
Effects of pollution
Organic waste uses up the oxygen dissolved in the water as it decays. When oxygen falls too low, fish and other water life die. Fertilisers feed algae, which then multiply and cover the surface; when the algae die, their decay removes even more oxygen. This is called eutrophication. Polluted water also spreads diseases such as cholera and typhoid when people drink it or use it for washing. Chemicals in the water can enter the food chain and harm people who eat the fish.
Scientists measure the amount of organic pollution by the biochemical oxygen demand (BOD): the oxygen that bacteria need to break down the waste in a sample. A higher BOD means more pollution.
Conservation measures
| Action | Purpose |
|---|---|
| Sewage treatment plants | Clean waste before it reaches the river |
| Effluent treatment in factories | Remove harmful chemicals from industrial water |
| Laws against dumping | Stop solid waste and untreated discharge |
| Careful use of fertiliser and pesticide | Reduce runoff from fields |
| Planting trees and grass on river banks | Filter runoff and hold the soil |
| Leaving enough water in the river | Allow dilution and keep life going |
| Public awareness | People stop littering and reuse water |
Worked example 1
Question: A town sends 4 million litres of sewage a day into the drain system. A treatment plant cleans 70 per cent of it. How much untreated sewage still reaches the river each day? Working: the plant treats 0.7 x 4 = 2.8 million litres. Untreated = 4 - 2.8 = 1.2 million litres. Answer: 1.2 million litres a day (a made-up figure).
Worked example 2
Question: A factory discharges 200 units of a pollutant a day. A new treatment unit removes 85 per cent of it. How many units are discharged after treatment? Working: removed = 0.85 x 200 = 170; discharged = 200 - 170 = 30. Answer: 30 units a day, a reduction of 85 per cent.
Worked example 3
Question: Give two reasons why a river is more polluted downstream of a large city than upstream. Working: the city adds sewage and factory waste along the way, and the river's flow does not increase enough to dilute it. Answer: more waste is added, and the dilution is limited.
Pollution comes from sewage, industry, farm runoff and garbage. Treat waste at the source, reduce chemicals, and keep water flowing.
Key takeaways
- Sewage, industrial effluent, farm runoff and solid waste are the main pollutants.
- Pollution lowers oxygen, kills life and spreads disease.
- BOD measures organic pollution.
- Treatment, laws, careful farming and awareness protect rivers.
Check your understanding
-
1. Which is the main source of river pollution in many towns?
- Steady rainfall
- Melting mountain snow
- Raw sewage from towns
- Strong seasonal winds
Show answer
Answer: C. Sewage that flows untreated into drains and then rivers is a major source.
-
2. Excess fertiliser in a river leads to:
- Eutrophication
- Faster flow
- Cooler water
- More waterfalls
Show answer
Answer: A. Nutrients feed algae growth; when it decays, oxygen is used up.
-
3. A high BOD indicates:
- Clean water full of oxygen
- A fast and deep current
- Heavy organic pollution
- A very wide channel
Show answer
Answer: C. BOD is the oxygen needed to break down waste. A high value means more organic pollution.
-
4. A plant treats 60 per cent of 5 million litres of sewage a day. How much goes untreated?
- 1 million litres
- 2 million litres
- 3 million litres
- 4 million litres
Show answer
Answer: B. Treated: 3 million; untreated: 5 - 3 = 2 million litres.
-
5. Planting trees and grass on river banks helps because they:
- Increase the sewage
- Heat the water
- Block the flow completely
- Filter runoff and hold the soil
Show answer
Answer: D. Vegetation traps sediment and some pollutants and holds the bank in place.
Sign in to keep track of the lessons you finish.