• Foundation
  • About 13 min
  • 5 practice questions

Uses of rivers and multipurpose projects

List the many uses of rivers, describe how a multipurpose project works, and weigh its benefits against its costs with simple calculations.

If something looks wrong, please tell us.

Since ancient times people have settled beside rivers. Rivers give water to drink and to irrigate, power to turn turbines, routes for boats and food from their fish. In modern times, large dams serve several of these needs together. All figures in this lesson are made up for practice and are not data about any real project.

Uses of rivers

  • Irrigation: river water fed into canals waters fields, especially where rainfall is uncertain.
  • Drinking and household water for villages and cities.
  • Hydroelectric power: falling water turns turbines to produce electricity.
  • Navigation: boats and barges carry goods and people on the larger rivers.
  • Fishing and fertile land: rivers support fisheries, and their silt makes farmland fertile.
  • Industry: factories use river water for cooling and processing.
  • Tourism and culture: rivers draw visitors and have religious and cultural importance.

What is a multipurpose project?

A multipurpose river valley project is a dam, with its canals and power station, built to serve more than one purpose at once. The dam holds water in a reservoir. The stored water is used for:

  • flood control, by holding back peak flows in the rainy season;
  • irrigation, through canals;
  • hydroelectric power, by passing water through turbines;
  • water supply for towns and industry;
  • fishing, boating and tourism on the reservoir.

Benefits and costs

Weighing a project
BenefitsCosts and problems
Water for dry months and for irrigationPeople and villages displaced when land is flooded
Electricity from falling waterLoss of forest, farmland and wildlife habitat
Reduced flood damage downstreamSilt collects in the reservoir and reduces its capacity
Water for towns and industryLess silt and water reach the lower course, which can harm farms and delta

Planners must weigh both columns. A good project has fair rehabilitation for displaced people, care for the environment, and a plan to remove silt or protect the catchment.

Worked example 1

Question: A reservoir covers 20 sq km and has an average depth of 10 m. Estimate the volume of water stored. Working: 20 sq km = 20,000,000 sq m. Volume = 20,000,000 x 10 = 200,000,000 cubic metres. Answer: about 20 crore cubic metres (200 million cubic metres), an illustrative figure.

Worked example 2

Question: A crop needs a 6 cm depth of irrigation water over a field of 1 hectare (10,000 sq m). How much water is needed? How much for 40 hectares? Working: 6 cm = 0.06 m. For one hectare, volume = 10,000 x 0.06 = 600 cubic metres. For 40 hectares, 600 x 40 = 24,000 cubic metres. Answer: 600 cubic metres per hectare, and 24,000 cubic metres for 40 hectares.

Worked example 3

Question: Suppose silt fills 1 per cent of a 200 million cubic metre reservoir each year. What is the capacity lost in one year and what remains after the first year? Working: 1 per cent of 200 million = 2 million. 200 - 2 = 198. Answer: 2 million cubic metres is lost, leaving 198 million. Over decades, silting can reduce usefulness greatly, which is why catchment protection matters.

A multipurpose project stores water in a reservoir for flood control, irrigation, power and water supply, and has costs as well as benefits.

— Rule to remember

Key takeaways

  • Rivers give water, power, transport, food and fertile land.
  • A multipurpose project serves several needs through one dam.
  • Costs include displacement, habitat loss and silting.
  • Volume = area x depth; irrigation volume = area x depth of water.

Check your understanding

  1. 1. A multipurpose river project is built to:

    1. Supply only drinking water
    2. Serve many needs with one dam
    3. Dig a single canal alone
    4. Create a river delta there
    Show answer

    Answer: B. The dam and its reservoir serve flood control, irrigation, power and water supply together.

  2. 2. Which is a cost of a large dam?

    1. More fertile silt in the delta
    2. Cheaper power for everyone
    3. No change to the river
    4. People being displaced from the area
    Show answer

    Answer: D. Land and villages are submerged, so people have to move.

  3. 3. A reservoir covers 5 sq km and has an average depth of 20 m. Its volume is about:

    1. 25 million cubic metres
    2. 50 million cubic metres
    3. 100 million cubic metres
    4. 200 million cubic metres
    Show answer

    Answer: C. 5 sq km = 5,000,000 sq m; x 20 = 100,000,000 cubic metres.

  4. 4. Irrigating 10 hectares to a depth of 5 cm needs how much water?

    1. 500 cubic metres
    2. 1,000 cubic metres
    3. 2,500 cubic metres
    4. 5,000 cubic metres
    Show answer

    Answer: D. One hectare is 10,000 sq m; x 0.05 m = 500 cubic metres. For 10 hectares, 5,000 cubic metres.

  5. 5. Silt collecting behind a dam mainly causes:

    1. The reservoir to lose capacity over time
    2. More floods upstream of the village
    3. Cooler water downstream
    4. Faster turbines
    Show answer

    Answer: A. Sediment settles in the still water, taking up space and reducing storage.

Sign in to keep track of the lessons you finish.

Next lesson → River pollution and river conservation

Privacy · Terms · Refunds · Delivery