• Foundation
  • About 12 min
  • 5 practice questions

Earthquakes: causes, waves and measurement

Explain what causes an earthquake, name the focus and epicentre, describe P, S and surface waves, and read the magnitude scale in simple examples.

If something looks wrong, please tell us.

An earthquake is a sudden shaking of the ground. Millions of small ones happen every year and most are too weak to feel, but a few are strong enough to destroy buildings. In this lesson you will learn why the ground shakes, what the waves of an earthquake are like and how strength is measured. Speeds and distances in the examples are made up to keep the arithmetic easy.

Why the ground shakes

The rocks of the crust are always under slow stress, mainly because plates push, pull and slide past each other. For a long time the rocks bend and store energy, like a stretched elastic band. When the stress becomes too great, the rocks suddenly break and slip along a crack called a fault, and the stored energy is let go as waves that travel through the Earth. Most earthquakes occur along plate boundaries. Volcanic eruptions, large landslides and underground explosions can also cause shaking.

Focus and epicentre

The point underground where the rocks first break is the focus (or hypocentre). The point on the surface directly above the focus is the epicentre. The shaking is usually strongest near the epicentre and weakens as the waves spread out.

Three kinds of seismic waves

Seismic waves
WaveHow it moves the rockSpeed and path
P wave (primary)Pushes and pulls in the direction the wave travelsFastest; passes through solids and liquids
S wave (secondary)Shakes the rock up and down or sidewaysSlower than P; passes through solids only
Surface wavesRoll along the groundSlowest; cause most damage

A seismograph is an instrument that records ground motion, and its record is a seismogram. Because P waves arrive first and S waves later, the gap between their arrivals tells scientists how far away the earthquake was.

Measuring strength

Magnitude measures the energy released at the source and is given as a number on a scale such as the Richter scale. The scale is logarithmic: for each whole number of increase, the recorded ground motion becomes ten times larger. Intensity measures the effects on people and buildings at a place, and it differs from place to place, being greater near the epicentre.

Worked example 1: time gap between waves

Suppose P waves travel at 6 km/s and S waves at 3 km/s. A station is 120 km from the epicentre. P arrives after 120 / 6 = 20 s. S arrives after 120 / 3 = 40 s. The gap is 40 - 20 = 20 s. A station twice as far away would have a bigger gap, because the faster P wave pulls further ahead as the distance grows.

Worked example 2: comparing magnitudes

How much larger is the ground motion of a magnitude 6 earthquake than of a magnitude 4 earthquake? The difference is 2 whole numbers, so the motion is 10 x 10 = 100 times larger. The scale is not a simple line: a magnitude 6 is much more than 'half as big again' as a magnitude 4.

Worked example 3: focus or epicentre?

A report says that an earthquake began 30 km below the surface and was strongest in a town directly above that point. The point 30 km below is the focus; the town directly above it is at the epicentre.

Focus underground, epicentre on the surface above it. P is first, S second, surface waves last and most damaging. Each step of magnitude means ten times the motion.

— Rule to remember

Key takeaways

  • Earthquakes happen when stressed rock suddenly slips along a fault, mostly at plate boundaries.
  • P waves are fastest and pass through liquids; S waves cannot.
  • A seismograph records the waves.
  • Magnitude is logarithmic; intensity is the effect at a place.

Check your understanding

  1. 1. The point on the surface directly above the place where the rock first breaks is the:

    1. Focus point
    2. Fault line
    3. Epicentre
    4. Crater rim
    Show answer

    Answer: C. The epicentre lies on the surface directly above the focus.

  2. 2. Which seismic wave arrives first at a recording station?

    1. S wave
    2. Surface wave
    3. They arrive together
    4. P wave
    Show answer

    Answer: D. P waves are the fastest and arrive first.

  3. 3. An instrument that records ground shaking is called a:

    1. Barometer
    2. Seismograph
    3. Thermometer
    4. Anemometer
    Show answer

    Answer: B. A seismograph records the motion of the ground during an earthquake.

  4. 4. P waves travel at 6 km/s. How long do they take to travel 90 km?

    1. 15 s
    2. 30 s
    3. 540 s
    4. 6 s
    Show answer

    Answer: A. Time = 90 / 6 = 15 s.

  5. 5. A magnitude 7 earthquake compared with a magnitude 5 earthquake has ground motion that is:

    1. 2 times as large
    2. 10 times as large
    3. 20 times as large
    4. 100 times as large
    Show answer

    Answer: D. The difference is 2 whole numbers, so the motion is 10 x 10 = 100 times larger.

Privacy · Terms · Refunds · Delivery