• Foundation
  • About 13 min
  • 5 practice questions

Costs, revenue and break-even in a factory

Separate fixed from variable costs, compute total and average cost, find the break-even output, and measure the margin of safety.

If something looks wrong, please tell us.

Whether a factory survives depends on a simple comparison: do the sales cover the costs? Managers use a few basic ideas to answer this, and examiners test them with small calculations. This lesson builds the vocabulary of cost and revenue, and the break-even point, step by step. All figures are illustrative.

Fixed and variable costs

  • Fixed costs do not change with output in the short run: rent of the building, salaries of permanent staff, insurance, interest on loans.
  • Variable costs change with output: raw materials, power used in production, piece-rate wages, packing.
  • Total cost = fixed cost + variable cost.
  • Average cost = total cost / output.

The words fixed and variable refer to the short run. In the long run a firm can build a bigger plant or close one, so every cost can be changed and none is fixed. A cost that looks fixed in a month, such as rent, may be avoidable over several years.

Revenue and profit

Revenue = price x quantity sold. Profit = revenue - total cost. The difference between price and variable cost per unit is the contribution of each unit: it first goes towards covering fixed cost, and after that it becomes profit.

Break-even

Break-even output = Fixed cost / (Price - Variable cost per unit)

— Rule to remember

At the break-even output, revenue equals total cost and profit is zero. Below it the factory makes a loss, above it a profit. The margin of safety shows how far sales exceed break-even: (actual sales - break-even sales) / actual sales x 100.

Worked example 1: break-even

Example 1. A factory has fixed costs of ₹60,000 a month. Each unit sells for ₹100 and has a variable cost of ₹40. Contribution per unit = 100 - 40 = ₹60. Break-even output = 60,000 / 60 = 1,000 units. Check: revenue = 1,000 x 100 = ₹1,00,000; total cost = 60,000 + 1,000 x 40 = ₹1,00,000. Profit is zero.

Worked example 2: profit and margin of safety

Example 2. The factory sells 1,500 units. Profit = 1,500 x 60 - 60,000 = ₹30,000. Margin of safety = (1,500 - 1,000) / 1,500 x 100 = 33.3%. Sales can fall by one-third before the factory begins to lose money.

Worked example 3: why large factories can be cheaper

Example 3. Average cost at 1,000 units = 60,000 / 1,000 + 40 = ₹100. At 2,000 units = 60,000 / 2,000 + 40 = ₹70. Fixed cost is spread over more units, so average cost falls. This is the core of economies of scale: bigger output can mean lower cost per unit. At some size, problems of managing a very large plant may push average cost up again.

Cost of a price cut

If the price falls to ₹80 while variable cost stays ₹40, the contribution becomes ₹40 and the break-even output rises to 60,000 / 40 = 1,500 units. A lower price needs a larger volume to cover the same fixed cost.

Key takeaways

  • Fixed costs stay when output changes; variable costs move with output.
  • Break-even output = fixed cost / contribution per unit.
  • The margin of safety measures how far sales exceed break-even.
  • Average cost falls with output while fixed cost is spread over more units.

Check your understanding

  1. 1. Fixed costs of ₹60,000, price ₹100 and variable cost ₹40 per unit. The break-even output is

    1. 1,000 units
    2. 600 units
    3. 1,500 units
    4. 1,667 units
    Show answer

    Answer: A. Contribution = 60, so break-even = 60,000 / 60 = 1,000 units.

  2. 2. With sales of 1,500 units in the same case, the profit is

    1. ₹1,50,000
    2. ₹90,000
    3. ₹60,000
    4. ₹30,000
    Show answer

    Answer: D. Profit = 1,500 x 60 - 60,000 = ₹30,000.

  3. 3. The average cost at an output of 2,000 units is

    1. ₹30
    2. ₹100
    3. ₹70
    4. ₹40
    Show answer

    Answer: C. Average cost = 60,000 / 2,000 + 40 = 30 + 40 = ₹70.

  4. 4. Which of the following is a fixed cost?

    1. Cost of raw material
    2. Rent of the factory building
    3. Piece-rate wages
    4. Cost of packing material
    Show answer

    Answer: B. Rent does not change with output in the short run. The others vary with output.

  5. 5. Sales of 1,500 units against a break-even of 1,000 units give a margin of safety of

    1. 66.7%
    2. 50%
    3. 33.3%
    4. 25%
    Show answer

    Answer: C. (1,500 - 1,000) / 1,500 x 100 = 33.3%.

Privacy · Terms · Refunds · Delivery