• Foundation
  • About 15 min
  • 5 practice questions

Measuring industrial output: IIP and the core industries

Read and calculate with the Index of Industrial Production, know its sectoral and use-based groups, list the eight core industries and spot base effects.

If something looks wrong, please tell us.

News reports say things like 'industrial output grew 5 per cent'. That number comes from an index, and exam questions test both what the index contains and how to calculate with it. This lesson explains the Index of Industrial Production (IIP), the index of eight core industries, and the simple calculations behind growth figures.

What an index number does

An index compares the level of something with a chosen base year, whose value is set at 100. If an index of production is 130, output is 30 per cent above the base year in volume. The IIP measures the volume of industrial production, not its rupee value, so a rise in prices alone does not raise it. It is a weighted average: each industry gets a weight according to its importance in the base year, and the indices of all industries are combined with those weights (a fixed-base, Laspeyres-type method).

The two ways the IIP is grouped

By sector, the IIP has three parts: mining, manufacturing and electricity. Manufacturing carries by far the largest weight, so it largely decides the overall figure. By use, the same output is regrouped into six categories.

Use-based classification (illustrative examples)
Use-based groupExamples
Primary goodsCoal, crude oil, electricity, fertilisers
Capital goodsMachinery, commercial vehicles
Intermediate goodsYarn, chemicals, steel products used further
Infrastructure or construction goodsCement, steel bars, paint
Consumer durablesRefrigerators, two-wheelers, televisions
Consumer non-durablesSoaps, packaged food, medicines

The eight core industries

A separate monthly index tracks eight core industries, which supply the basic inputs of the whole economy: coal, crude oil, natural gas, refinery products, fertilisers, steel, cement and electricity. Because these industries are also part of the IIP and their figure comes out earlier, it is watched as an early signal of how industry is doing. A memory aid: three energy fuels (coal, crude, gas), two processed energy goods (refinery products, electricity), and three materials (fertilisers, steel, cement).

Growth rate from an index

Growth rate = (current index − earlier index) ÷ earlier index × 100. Monthly IIP growth is normally year-on-year: a month is compared with the same month of the previous year, which removes seasonal swings such as festival demand or monsoon effects.

Worked example 1: growth rate

The IIP is 130 in a month and was 125 in the same month a year earlier. Growth = (130 − 125) ÷ 125 × 100 = 5 ÷ 125 × 100 = 4 per cent. Note that the change in index points (5) is not the percentage growth; you must divide by the earlier value.

Worked example 2: a weighted index

Suppose (illustrative weights) mining has weight 15, manufacturing 75 and electricity 10, and their indices are 120, 140 and 160. The overall index = (15 × 120 + 75 × 140 + 10 × 160) ÷ 100 = (1,800 + 10,500 + 1,600) ÷ 100 = 13,900 ÷ 100 = 139. Manufacturing's large weight pulls the answer close to its own index of 140, even though electricity grew most.

The base effect

If output fell sharply last year, even a normal recovery shows a large growth rate this year. Example: an index falls from 120 to 90, a drop of 30 ÷ 120 = 25 per cent. If it returns to 120 next year, growth is 30 ÷ 90 = 33.3 per cent, yet output has only got back to where it was. This is the base effect; always ask what last year's level was before celebrating a high growth figure.

Growth = change ÷ earlier value × 100. Overall index = Σ(weight × index) ÷ Σ weights. A low base makes growth look high.

— Rule to remember

Key takeaways

The IIP measures the volume of industrial output relative to a base year of 100, grouped by sector (mining, manufacturing, electricity) and by use (six groups). The eight core industries are coal, crude oil, natural gas, refinery products, fertilisers, steel, cement and electricity. Calculate growth by dividing by the earlier value, combine sectors with weights, and watch for base effects.

Check your understanding

  1. 1. The IIP is 150 this month and was 120 in the same month last year. What is the growth rate?

    1. 30 per cent
    2. 25 per cent
    3. 20 per cent
    4. 15 per cent
    Show answer

    Answer: B. (150 − 120) ÷ 120 × 100 = 30 ÷ 120 × 100 = 25 per cent.

  2. 2. Which of these is NOT one of the eight core industries?

    1. Cement
    2. Steel
    3. Fertilisers
    4. Textiles
    Show answer

    Answer: D. The eight are coal, crude oil, natural gas, refinery products, fertilisers, steel, cement and electricity. Textiles are not among them.

  3. 3. In the sectoral classification, the IIP is made up of:

    1. Mining, manufacturing and electricity
    2. Agriculture, industry and services
    3. Capital, intermediate and consumer goods
    4. Coal, steel and cement
    Show answer

    Answer: A. By sector, the IIP has three parts: mining, manufacturing and electricity.

  4. 4. With weights 20, 70 and 10 and sector indices 110, 130 and 150, what is the overall index?

    1. 130
    2. 126
    3. 128
    4. 132
    Show answer

    Answer: C. (20 × 110 + 70 × 130 + 10 × 150) ÷ 100 = (2,200 + 9,100 + 1,500) ÷ 100 = 12,800 ÷ 100 = 128.

  5. 5. An index falls from 200 to 160 in one year and returns to 200 the next year. What growth is shown in the second year?

    1. 20 per cent
    2. 25 per cent
    3. 0 per cent
    4. 40 per cent
    Show answer

    Answer: B. (200 − 160) ÷ 160 × 100 = 40 ÷ 160 × 100 = 25 per cent. Output is only back to its old level; the high figure is a base effect.

Privacy · Terms · Refunds · Delivery