- Practice
- About 18 min
- 5 practice questions
Extracting moderately and less reactive metals, refining and corrosion
Explain roasting, calcination and reduction with carbon or aluminium, extraction of copper from Cu₂S, refining, and the causes and prevention of corrosion, including galvanising, tinning, anodising, electroplating and alloying.
If something looks wrong, please tell us.
By the end of this lesson you can
- Distinguish roasting from calcination and write equations for the extraction of zinc.
- Explain the thermit reaction and the extraction of copper from Cu₂S.
- Describe corrosion of iron, copper and silver, and methods of preventing it.
Metals in the middle of the reactivity series are less firmly bound in their compounds, so cheaper methods than electrolysis can be used. Metals at the bottom are easiest of all to obtain.
Moderately reactive metals: zinc, iron, lead, copper
These usually occur as sulphides or carbonates. It is easier to obtain a metal from its oxide, so the ore is first changed into an oxide.
Roasting and calcination
-
Roasting
- Used for sulphide ores
- Ore heated strongly in excess air
- Sulphide becomes oxide; SO₂ is given off
- Example: 2ZnS + 3O₂ → 2ZnO + 2SO₂
-
Calcination
- Used for carbonate ores
- Ore heated strongly in a limited supply of air
- Carbonate becomes oxide; CO₂ is given off
- Example: ZnCO₃ → ZnO + CO₂
The oxide is then reduced with a suitable reducing agent such as carbon: ZnO + C → Zn + CO. Here ZnO loses oxygen (reduced) and carbon gains oxygen (oxidised).
Reactive metals such as sodium, calcium and aluminium can also act as reducing agents, because they displace a less reactive metal from its compound. In the thermit reaction, iron oxide is reduced by aluminium: Fe₂O₃ + 2Al → 2Fe + Al₂O₃ + heat. So much heat is produced that the iron forms in the molten state, and this is used to weld railway tracks and broken machine parts. Similarly, 3MnO₂ + 4Al → 3Mn + 2Al₂O₃ + heat.
Less reactive metals
Gold, silver and platinum are found free. Free copper is now rare; copper is obtained mainly from Cu₂S simply by heating in air. Part of the sulphide becomes oxide, which then reacts with the remaining sulphide: 2Cu₂S + 3O₂ → 2Cu₂O + 2SO₂, then 2Cu₂O + Cu₂S → 6Cu + SO₂.
Refining
Metals from these processes contain impurities, and electrolysis is used to purify them. In electrolytic refining, the impure metal is made the anode and a thin strip of pure metal the cathode, in a solution of a salt of that metal. On passing current, pure metal dissolves from the anode and deposits on the cathode, while impurities are left behind.
Corrosion
- Iron reacts with moist air and forms a reddish deposit, rust (Fe₂O₃·xH₂O). Rusting causes great financial loss.
- Copper reacts with carbon dioxide and moisture in air and gets a greenish layer of copper carbonate; this is called patination. Lemon or tamarind, which are acidic, dissolve this layer and clean the vessel.
- Silver turns blackish because it reacts with hydrogen sulphide in air, forming silver sulphide (Ag₂S).
- Aluminium forms a thin layer of aluminium oxide that dulls its surface.
- Gold and platinum do not react with air, so they always glitter.
Preventing corrosion
Ways to prevent corrosion
-
Coating with paint, oil, grease or varnish
- Keeps out air and moisture
- Temporary: rusting starts under a scratch
-
Galvanising
- A thin layer of zinc on iron or steel
- Zinc is more electropositive, so it corrodes first and protects the iron
-
Tinning (kalhai)
- A layer of molten tin on copper or brass vessels
- Prevents the poisonous green layer that spoils buttermilk or curry
-
Anodising
- Article made the anode in electrolysis
- A thin, strong, uniform oxide layer forms on aluminium or copper
-
Electroplating
- A less reactive metal is coated on a more reactive one by electrolysis
- Silver-plated spoons, gold-plated ornaments
-
Alloying
- A homogeneous mixture of a metal with other metals or nonmetals
- Bronze (mainly copper with some tin) statues resist sun and rain
- Stainless steel (iron with chromium and nickel) does not rust
An alloy in which one of the metals is mercury is called an amalgam, for example sodium amalgam and zinc amalgam. Silver amalgam was once used by dentists, and gold amalgam is used in extracting gold.
Worked example: give reasons
- Painting is not permanent protection. If the paint is scratched, air and moisture reach the iron and rusting starts beneath the paint.
- Galvanised iron rusts after a few years. The zinc corrodes first; once it has worn away, the iron is exposed and starts rusting.
- New iron sheets look shiny because they are coated with zinc (galvanised).
Key takeaways: sulphide ores are roasted and carbonate ores calcined to oxides, which are reduced by carbon or by a more reactive metal (thermit reaction). Copper comes from Cu₂S by heating in air. Impure metals are refined by electrolysis. Corrosion (rust, patina, tarnish) is prevented by painting, galvanising, tinning, anodising, electroplating and alloying.
Check your understanding
-
1. Heating a sulphide ore strongly in excess air to convert it into an oxide is called:
- Calcination
- Roasting
- Leaching
- Anodising
Show answer
Answer: B. Roasting converts sulphide ores to oxides in excess air, e.g. 2ZnS + 3O₂ → 2ZnO + 2SO₂. Calcination is for carbonate ores in limited air.
-
2. In the thermit reaction Fe₂O₃ + 2Al → 2Fe + Al₂O₃, aluminium acts as:
- An oxidising agent
- A catalyst
- A reducing agent
- A gangue
Show answer
Answer: C. Aluminium takes oxygen from iron oxide, reducing it to iron, while aluminium itself is oxidised. So aluminium is the reducing agent.
-
3. Why do silver articles turn black in air?
- They form silver oxide with oxygen
- They form silver sulphide with hydrogen sulphide in the air
- They absorb dust
- They form silver carbonate
Show answer
Answer: B. Silver reacts with traces of hydrogen sulphide in air to form black silver sulphide, Ag₂S.
-
4. Galvanising protects iron by coating it with:
- Tin
- Zinc
- Paint
- Copper
Show answer
Answer: B. A thin layer of zinc is applied. Zinc, being more electropositive, corrodes first and protects the iron below.
-
5. Which is an amalgam?
- Bronze
- Stainless steel
- Brass
- An alloy of sodium with mercury
Show answer
Answer: D. An amalgam is an alloy in which one of the metals is mercury, such as sodium amalgam.
Sign in to keep track of the lessons you finish.