Revision notes

Chapter 8 Metallurgy: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Physical properties of metals and nonmetals

General physical properties

  • Metals
    • Mostly solids at room temperature
    • Have lustre (shine)
    • Malleable and ductile
    • Good conductors of heat and electricity
    • Generally hard
    • High melting and boiling points
    • Many are sonorous (ring when struck)
  • Nonmetals
    • Solids or gases (one liquid)
    • No lustre
    • Not malleable or ductile; solids are brittle
    • Poor conductors of heat and electricity
    • Generally not hard
    • Low melting and boiling points
Important exceptions
General ruleException
Metals are solidMercury and gallium are liquids at or near room temperature (gallium melts at about 30 °C)
Metals are hardLithium, sodium and potassium (group 1) are so soft they can be cut with a knife
Metals have high melting pointsSodium, potassium, mercury and gallium have low melting points; tungsten has the highest (about 3422 °C)
Nonmetals are solids or gasesBromine is a liquid
Nonmetals have no lustreIodine crystals are shiny
Nonmetals are not hardDiamond, a form (allotrope) of carbon, is the hardest natural substance
Nonmetals do not conduct electricityGraphite, another allotrope of carbon, is a good conductor

Metals lose electrons easily to form positive ions, so they are called electropositive elements. Nonmetals gain electrons to form negative ions, so they are called electronegative elements.

Key takeaways: metals are generally shiny, hard, malleable, ductile, sonorous and good conductors with high melting points; nonmetals generally are not. Learn the exceptions: mercury and gallium, soft alkali metals, liquid bromine, shiny iodine, hard diamond and conducting graphite.

Read the full lesson

Lesson 2

Chemical properties of metals and the reactivity series

Metal A + salt solution of metal B → salt solution of metal A + metal B, only if A is more reactive than B.

Groups in the reactivity series

  • Highly reactive
    • K, Na, Li, Ca, Mg, Al
    • React readily with oxygen and acids; the first few react with cold water
  • Moderately reactive
    • Zn, Fe, Pb
    • React with acids; Zn and Fe react with steam
  • Less reactive
    • Cu, Hg, Ag, Au
    • Do not displace hydrogen from dilute acids; Ag and Au stay shiny

Key takeaways: metals form oxides with oxygen, hydroxides or oxides plus hydrogen with water or steam, and salts plus hydrogen with dilute acids. Aqua regia (HCl : HNO₃ = 3 : 1) dissolves gold. A more reactive metal displaces a less reactive one from its salt solution; the reactivity series runs K, Na, Li, Ca, Mg, Al, Zn, Fe, Pb, Cu, Hg, Ag, Au.

Read the full lesson

Lesson 3

Chemical properties of nonmetals and ionic compounds

Properties of ionic compounds and their reasons

  • Crystalline, hard and brittle solids
    • Ions are arranged regularly: negative ions around each positive ion and vice versa
    • Crystal shape depends on the sizes and charges of the ions
    • Strong attraction makes them hard, but pressure can shatter them
  • High melting and boiling points
    • Much energy is needed to overcome the strong attraction between ions
    • Examples: NaCl melts at 801 °C, KCl at 772 °C, MgO at about 2852 °C
  • Soluble in water, not in kerosene or petrol
    • Water molecules surround the separated ions and attract them
    • Kerosene and petrol cannot form such attractions
  • Conduct electricity when molten or dissolved
    • In the solid, ions cannot move, so no conduction
    • When molten or in solution, ions move to the oppositely charged electrodes
    • So they are called electrolytes

Key takeaways: nonmetals usually form acidic or neutral oxides and, except the halogens, do not react with water or dilute acids. Metals give electrons to nonmetals to form ionic compounds, which are crystalline, hard and brittle, have high melting points, dissolve in water, and conduct electricity only when molten or dissolved.

Read the full lesson

Lesson 4

Metallurgy: ores, concentration and extraction of reactive metals

Main stages of metallurgy

  1. Concentration of the ore Remove gangue to increase the proportion of the metal compound.
  2. Extraction of the metal Reduce the metal compound to metal; the method depends on the metal's reactivity.
  3. Refining Purify the impure metal, usually by electrolysis.

Electrolysis of molten NaCl. Cathode: Na⁺ + e⁻ → Na (reduction). Anode: 2Cl⁻ → Cl₂ + 2e⁻ (oxidation).

Key takeaways: ores are minerals from which metals can be extracted economically; gangue is the impurity. Ores are concentrated by gravity, magnetic, froth flotation or leaching methods. Highly reactive metals are extracted by electrolysis of their molten compounds; aluminium comes from bauxite by leaching (Bayer's or Hall's process) followed by electrolysis of alumina with cryolite.

Read the full lesson

Lesson 5

Extracting moderately and less reactive metals, refining and corrosion

Roasting and calcination

  • Roasting
    • Used for sulphide ores
    • Ore heated strongly in excess air
    • Sulphide becomes oxide; SO₂ is given off
    • Example: 2ZnS + 3O₂ → 2ZnO + 2SO₂
  • Calcination
    • Used for carbonate ores
    • Ore heated strongly in a limited supply of air
    • Carbonate becomes oxide; CO₂ is given off
    • Example: ZnCO₃ → ZnO + CO₂

Ways to prevent corrosion

  • Coating with paint, oil, grease or varnish
    • Keeps out air and moisture
    • Temporary: rusting starts under a scratch
  • Galvanising
    • A thin layer of zinc on iron or steel
    • Zinc is more electropositive, so it corrodes first and protects the iron
  • Tinning (kalhai)
    • A layer of molten tin on copper or brass vessels
    • Prevents the poisonous green layer that spoils buttermilk or curry
  • Anodising
    • Article made the anode in electrolysis
    • A thin, strong, uniform oxide layer forms on aluminium or copper
  • Electroplating
    • A less reactive metal is coated on a more reactive one by electrolysis
    • Silver-plated spoons, gold-plated ornaments
  • Alloying
    • A homogeneous mixture of a metal with other metals or nonmetals
    • Bronze (mainly copper with some tin) statues resist sun and rain
    • Stainless steel (iron with chromium and nickel) does not rust

Key takeaways: sulphide ores are roasted and carbonate ores calcined to oxides, which are reduced by carbon or by a more reactive metal (thermit reaction). Copper comes from Cu₂S by heating in air. Impure metals are refined by electrolysis. Corrosion (rust, patina, tarnish) is prevented by painting, galvanising, tinning, anodising, electroplating and alloying.

Read the full lesson

Privacy · Terms · Refunds · Delivery