- Practice
- About 14 min
- 5 practice questions
Convex mirrors, convergence and divergence, and uses of spherical mirrors
Describe the image formed by a convex mirror, explain converging and diverging beams, identify a mirror by its images, and match concave and convex mirrors to their everyday uses.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the image formed by a convex mirror for any object position.
- Explain convergence and divergence of light.
- Identify a mirror as plane, concave or convex from the images it forms.
- Give the uses of concave and convex mirrors with reasons.
Look into the side mirror of a scooter: the vehicles behind look small, but you can see a wide stretch of road. Look into a shaving mirror close up: your face looks bigger. Different curved mirrors suit different jobs, and the reason lies in how they bend the path of light after reflection.
Image formed by a convex mirror
Draw a ray from the top of the object parallel to the axis: after reflection it moves away as if coming from F behind the mirror. Draw another ray from the top of the object heading towards C: it is reflected straight back. Extended behind the mirror, the two reflected rays meet between P and F. The image is therefore behind the mirror, erect, diminished and virtual. Unlike a concave mirror, the nature of the image does not depend on the object's distance: it is always virtual, erect and smaller, and it gets smaller as the object moves away.
Convergence and divergence
Converging and diverging beams
-
Converging (concave mirror)
- Rays come together at a point after reflection
- Concave mirror is called a focusing mirror
- Used to concentrate light: doctors focus light on a tooth, ear or nose
- Solar devices collect sunlight at the focus
-
Diverging (convex mirror)
- Rays spread out after reflection
- Convex mirror is called a dispersing mirror
- Used to spread light or view a wide area
- Example: light spread over a road from street lamps
The image in a plane mirror is also formed at a point from which reflected rays appear to diverge, which is why it is virtual.
Which mirror is it?
| Mirror | Face held close | Mirror moved farther away |
|---|---|---|
| Plane | Erect, same size | Erect, same size (only farther behind) |
| Concave | Erect and larger | Grows larger, then the image becomes inverted (and then smaller) |
| Convex | Erect and smaller | Stays erect, keeps getting smaller; shows a wide view of the surroundings |
Uses of spherical mirrors
- Shaving mirrors, dentists' mirrors, barber shops (concave): the face or tooth is placed between P and F, giving an erect, virtual, magnified image.
- Torches and vehicle headlamps (concave): the bulb is placed at the focus, so the reflected rays leave as a strong parallel beam (Rule 2).
- Floodlights (concave): a large concave reflector sends out a strong, bright beam; the Balbharati book describes the lamp placed a little beyond the centre of curvature.
- Solar cookers and solar devices (concave): parallel sunlight is collected in the focal plane, producing high temperature.
- Rear-view and side mirrors of vehicles (convex): always give an erect image and a wide field of view.
- Large mirrors at gates, sharp bends and road junctions (convex): let people see traffic coming from a wide area.
Worked example 1: why does focused sunlight burn paper?
Question: A concave mirror focuses the Sun's image on a paper, and after a while the paper starts to burn. Explain.
Working: Sunlight falling over the whole mirror surface carries energy. The concave mirror converges all these rays to a very small spot at its focus. The same energy is crowded into a tiny area, so that spot becomes very hot, enough to set the paper on fire. This is why concave mirrors are used in solar devices.
Worked example 2: choosing the mirror
Question: Choose the mirror and explain: (a) a car headlamp, (b) a mirror at a blind turn on a ghat road, (c) a mirror to examine a tooth.
Working: (a) Concave, with the bulb at F, so the light goes out as a parallel, far-reaching beam. (b) Convex, because it always gives an erect image and shows a wide view of the road around the bend. (c) Concave, held so that the tooth is between P and F, giving an upright, magnified image.
Convex mirror: always virtual, erect and diminished, with a wide field of view. Concave mirror: converges light, so it is used to focus or to make parallel beams.
Key takeaways: a convex mirror always forms a virtual, erect, diminished image behind it. Concave mirrors converge light (focusing mirrors); convex mirrors diverge it (dispersing mirrors). Uses follow from these properties: concave for shaving mirrors, headlamps and solar devices; convex for rear-view mirrors and road junctions.
Check your understanding
-
1. The image formed by a convex mirror is always
- real, inverted and magnified
- virtual, erect and diminished
- real, erect and the same size
- virtual, inverted and magnified
Show answer
Answer: B. Whatever the distance of the object, a convex mirror forms an image behind the mirror that is virtual, erect and smaller than the object.
-
2. Why are convex mirrors used as rear-view mirrors in vehicles?
- They give a magnified image
- They give a real image on a screen
- They converge light onto the driver's eye
- They always give an erect image and a wide field of view
Show answer
Answer: D. A convex mirror always gives an erect, diminished image, so a wide area of traffic behind can be seen in a small mirror.
-
3. Where is the bulb placed in a torch that uses a concave reflector, and why?
- At the focus, so that the reflected light forms a parallel beam
- At the pole, so that light spreads out
- Behind the mirror
- At twice the radius of curvature
Show answer
Answer: A. A ray passing through the focus becomes parallel to the axis after reflection, so a bulb at F gives a strong parallel beam.
-
4. A mirror shows Riya's face erect and larger when held close, and inverted when held far away. The mirror is
- plane
- convex
- concave
- cylindrical plane
Show answer
Answer: C. Only a concave mirror gives an erect, magnified image when the object is close (inside F) and an inverted, real image when the object is beyond F.
-
5. Why is a concave mirror called a focusing mirror?
- Because rays parallel to its axis are brought together at its focus after reflection
- Because it always forms virtual images
- Because it spreads light out
- Because it has no centre of curvature
Show answer
Answer: A. A concave mirror converges parallel rays to the principal focus, so it focuses light. A convex mirror spreads them, so it is called a dispersing mirror.
Sign in to keep track of the lessons you finish.