• Practice
  • About 15 min
  • 5 practice questions

Images formed by a concave mirror

Use ray diagrams to find the position, nature and size of the image formed by a concave mirror for every position of the object, and tell real images from virtual ones.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Draw ray diagrams for a concave mirror using two standard rays.
  • State the position, nature and size of the image for six positions of the object.
  • Explain the difference between a real and a virtual image.

A concave mirror is unusual: depending on where you place the object, it can give an image that is real or virtual, upside down or upright, bigger or smaller. A shaving mirror held close shows a large upright face; the same mirror held far away shows a small upside-down face. Ray diagrams explain all of this.

Real and virtual images

A real image is formed where reflected rays actually meet. It is in front of the mirror, it is inverted, and it can be obtained on a screen. A virtual image is formed where reflected rays only appear to meet when extended behind the mirror. It is erect and cannot be obtained on a screen. The image formed on the retina of your eye is real, because the rays actually converge there.

The six cases

Images formed by a concave mirror
Position of objectPosition of imageNatureSize
At a very large (infinite) distanceAt FReal, invertedPoint-sized (highly diminished)
Beyond CBetween F and CReal, invertedDiminished
At CAt CReal, invertedSame size as object
Between C and FBeyond CReal, invertedMagnified
At FAt infinityReal, invertedVery large
Between F and PBehind the mirrorVirtual, erectMagnified

As the object moves in from far away towards the mirror

  1. Object far away Tiny real image at F.
  2. Object beyond C Smaller real image between F and C.
  3. Object at C Same-size real image at C.
  4. Object between C and F Bigger real image beyond C.
  5. Object at F Image goes off to infinity.
  6. Object between F and P Bigger, upright, virtual image behind the mirror.
The real image moves away from the mirror and grows until the object reaches F; inside F the image becomes virtual.

Drawing two of the cases

Object between C and F: from the top A of the object, draw a ray parallel to the axis; it reflects through F. Draw a second ray from A through F; it reflects parallel to the axis. The two reflected rays cross beyond C, below the axis. That crossing point is the top A₁ of the image. The foot B lies on the axis, so its image B₁ lies on the axis directly above A₁. The image A₁B₁ is beyond C, inverted, magnified and real.

Object between F and P: draw a ray from A parallel to the axis (it reflects through F) and a ray from A along the line from C (it reflects back on itself). In front of the mirror the reflected rays spread apart, so they never meet. Extended behind the mirror, they meet at A₁. The image is behind the mirror, erect, magnified and virtual: this is how a shaving or make-up mirror gives a large upright face.

Worked example 1: predicting from the table

Question: A concave mirror has focal length 10 cm. Describe the image when the object is (a) 30 cm away, (b) 15 cm away, (c) 6 cm away.

Working: f = 10 cm, so C is at 2f = 20 cm. (a) 30 cm is beyond C: image between F and C, real, inverted, diminished. (b) 15 cm is between C (20 cm) and F (10 cm): image beyond C, real, inverted, magnified. (c) 6 cm is between F and P: image behind the mirror, virtual, erect, magnified.

Worked example 2: getting a same-size image

Question: You want a real image exactly the same size as a candle, using a concave mirror of radius of curvature 36 cm. Where should the candle be, and where will you place the screen?

Working: A same-size real image is formed when the object is at C, and the image is then also at C. C is at a distance R = 36 cm from the pole. So place the candle 36 cm in front of the mirror and the screen at the same distance, 36 cm, slightly to one side so it does not block the light. (f = 18 cm, but it is R that we need here.)

For a concave mirror: object outside F gives a real, inverted image; object inside F gives a virtual, erect, magnified image. At C, the image is at C and the same size.

Key takeaways: a concave mirror forms real, inverted images for every object position beyond F, ranging from point-sized to very large, and a virtual, erect, magnified image when the object is between F and P. Real images can be caught on a screen; virtual images cannot.

Check your understanding

  1. 1. Where is the image formed when an object is placed at the centre of curvature of a concave mirror?

    1. At the focus
    2. Behind the mirror
    3. At infinity
    4. At the centre of curvature
    Show answer

    Answer: D. With the object at C, the image is also at C: real, inverted and of the same size as the object.

  2. 2. An object is placed between the pole and the focus of a concave mirror. The image is

    1. virtual, erect and magnified, behind the mirror
    2. real, inverted and diminished
    3. real, inverted and the same size
    4. at the focus
    Show answer

    Answer: A. Inside F, the reflected rays diverge and only appear to meet behind the mirror, giving a virtual, erect, magnified image. This is used in shaving mirrors.

  3. 3. A concave mirror has focal length 12 cm. An object is placed 40 cm away. The image will be

    1. beyond C, magnified
    2. between F and C, real, inverted and diminished
    3. behind the mirror, virtual
    4. at infinity
    Show answer

    Answer: B. C is at 2 × 12 = 24 cm. 40 cm is beyond C, so the image is between F and C, real, inverted and smaller than the object.

  4. 4. Which statement correctly distinguishes a real image from a virtual image?

    1. A real image is always magnified
    2. A virtual image can be obtained on a screen
    3. A real image is formed where reflected rays actually meet and can be obtained on a screen
    4. A virtual image is always inverted
    Show answer

    Answer: C. Real images are formed by rays actually meeting, so they can be caught on a screen. Virtual images are where rays only appear to meet; they cannot.

  5. 5. Sunlight is focused by a concave mirror onto a paper. Where must the paper be for the sharpest spot?

    1. At the principal focus
    2. At the centre of curvature
    3. At the pole
    4. Behind the mirror
    Show answer

    Answer: A. Rays from the very distant Sun are almost parallel to the axis, so they meet at the principal focus, forming a point-sized real image there.

Privacy · Terms · Refunds · Delivery