Revision notes

Chapter 11 Reflection of Light: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Plane mirrors: images, lateral inversion and mirrors at an angle

n = (360° ÷ A) − 1, where n is the number of images and A is the angle between the mirrors.

Smaller angle, more images
Angle between mirrors (A)360° ÷ ANumber of images (n)
120°32
90°43
60°65
45°87
30°1211

Key takeaways: a plane mirror forms a virtual, erect, same-size, laterally inverted image as far behind the mirror as the object is in front. Two mirrors at angle A give (360° ÷ A) − 1 images. A mirror half your height can show your whole image.

Read the full lesson

Lesson 2

Spherical mirrors: concave, convex and their terms

Two kinds of spherical mirror

  • Concave mirror
    • Reflecting surface is the inner, hollow side
    • Rays parallel to the axis meet at a real focus in front of the mirror
    • Also called a converging or focusing mirror
    • Example: shaving mirror, dentist's mirror
  • Convex mirror
    • Reflecting surface is the outer, bulging side
    • Rays parallel to the axis appear to come from a focus behind the mirror
    • Also called a diverging or dispersing mirror
    • Example: rear-view mirror of a vehicle
Remember the letters P, C, F
TermMeaningSymbol
PoleThe centre of the mirror's surfaceP
Centre of curvatureThe centre of the sphere of which the mirror is a partC
Radius of curvatureThe radius of that sphere (distance PC)R
Principal axisThe straight line through the pole and the centre of curvature-
Principal focusConcave: the point on the axis in front of the mirror where rays parallel to the axis meet after reflection. Convex: the point on the axis behind the mirror from which such rays appear to comeF
Focal lengthDistance between the pole and the principal focus; half the radius of curvaturef

Focal length = half the radius of curvature: f = R ÷ 2. The focus lies midway between the pole and the centre of curvature.

Key takeaways: a concave mirror reflects from the hollow side and converges parallel rays; a convex mirror reflects from the bulging side and diverges them. Learn P, C, R, F and f, with f = R ÷ 2. The radius at the point of incidence is the normal, and three standard rays make ray diagrams easy.

Read the full lesson

Lesson 3

Images formed by a concave mirror

Images formed by a concave mirror
Position of objectPosition of imageNatureSize
At a very large (infinite) distanceAt FReal, invertedPoint-sized (highly diminished)
Beyond CBetween F and CReal, invertedDiminished
At CAt CReal, invertedSame size as object
Between C and FBeyond CReal, invertedMagnified
At FAt infinityReal, invertedVery large
Between F and PBehind the mirrorVirtual, erectMagnified

As the object moves in from far away towards the mirror

  1. Object far away Tiny real image at F.
  2. Object beyond C Smaller real image between F and C.
  3. Object at C Same-size real image at C.
  4. Object between C and F Bigger real image beyond C.
  5. Object at F Image goes off to infinity.
  6. Object between F and P Bigger, upright, virtual image behind the mirror.
The real image moves away from the mirror and grows until the object reaches F; inside F the image becomes virtual.

For a concave mirror: object outside F gives a real, inverted image; object inside F gives a virtual, erect, magnified image. At C, the image is at C and the same size.

Key takeaways: a concave mirror forms real, inverted images for every object position beyond F, ranging from point-sized to very large, and a virtual, erect, magnified image when the object is between F and P. Real images can be caught on a screen; virtual images cannot.

Read the full lesson

Lesson 4

Convex mirrors, convergence and divergence, and uses of spherical mirrors

Converging and diverging beams

  • Converging (concave mirror)
    • Rays come together at a point after reflection
    • Concave mirror is called a focusing mirror
    • Used to concentrate light: doctors focus light on a tooth, ear or nose
    • Solar devices collect sunlight at the focus
  • Diverging (convex mirror)
    • Rays spread out after reflection
    • Convex mirror is called a dispersing mirror
    • Used to spread light or view a wide area
    • Example: light spread over a road from street lamps
Identifying a mirror by looking into it
MirrorFace held closeMirror moved farther away
PlaneErect, same sizeErect, same size (only farther behind)
ConcaveErect and largerGrows larger, then the image becomes inverted (and then smaller)
ConvexErect and smallerStays erect, keeps getting smaller; shows a wide view of the surroundings

Convex mirror: always virtual, erect and diminished, with a wide field of view. Concave mirror: converges light, so it is used to focus or to make parallel beams.

Key takeaways: a convex mirror always forms a virtual, erect, diminished image behind it. Concave mirrors converge light (focusing mirrors); convex mirrors diverge it (dispersing mirrors). Uses follow from these properties: concave for shaving mirrors, headlamps and solar devices; convex for rear-view mirrors and road junctions.

Read the full lesson

Lesson 5

Sign convention, mirror formula and magnification

Mirror formula: 1/v + 1/u = 1/f. Magnification: M = h₂/h₁ = −v/u.

Solving a mirror problem

  1. List the data with signs u is negative; f is negative for concave, positive for convex.
  2. Use 1/v = 1/f − 1/u Take a common denominator carefully.
  3. Read the sign of v Negative: in front, real. Positive: behind, virtual.
  4. Find M = −v/u Then h₂ = M × h₁.
  5. Check with the ray-diagram table The answer must match the expected case.

Key takeaways: use the pole as origin, the axis as the x-axis, the object on the left; distances to the left and heights below the axis are negative. Concave f is negative, convex f is positive. Use 1/v + 1/u = 1/f and M = h₂/h₁ = −v/u, then check against the six cases.

Read the full lesson

Privacy · Terms · Refunds · Delivery