• Practice
  • About 15 min
  • 5 practice questions

Reflection of sound: echo and reverberation

Apply the laws of reflection to sound, identify good and bad reflectors, calculate the minimum distance for a distinct echo, and explain reverberation and how it is reduced in halls.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State that sound obeys the laws of reflection.
  • Name good and bad reflectors of sound.
  • Calculate the minimum distance needed to hear a distinct echo.
  • Explain reverberation and ways to reduce it.

Shout at an echo point in a hill station and your own voice comes back a moment later. Sing in an empty room and your voice seems to hang in the air. Both happen because sound, like light, is reflected by surfaces.

Laws of reflection for sound

Sound waves are reflected by solid or liquid surfaces and follow the same laws as light: the incident sound and the reflected sound make equal angles with the perpendicular (normal) to the surface, and the incident direction, the reflected direction and the normal all lie in one plane. A surface used to reflect sound need not be polished; it may be smooth or rough, but it should be large compared with the wavelength.

Good and bad reflectors

Reflectors of sound

  • Good reflectors
    • Hard, flat surfaces
    • Walls of stone or concrete, metal sheets, hard floors
    • Reflect most of the sound that falls on them
  • Bad reflectors (absorbers)
    • Soft, porous materials
    • Curtains, carpets, clothes, paper, cushioned furniture
    • Absorb sound instead of reflecting it

Echo

An echo is the repetition of a sound caused by its reflection from a surface. Our brain retains the sensation of a sound for about 0.1 s. To hear the echo separately from the original sound, the reflected sound must arrive more than 0.1 s after it was produced. In that time the sound must travel to the reflecting surface and back.

For a distinct echo: total path = speed × 0.1 s; minimum distance of the reflector = half of that path.

Worked example 1: minimum distance for an echo

Question: Find the minimum distance of a wall for a distinct echo when the speed of sound is 340 m/s.

Working: Distance travelled in 0.1 s = 340 × 0.1 = 34 m. This is the trip to the wall and back, so the wall must be at least 34 ÷ 2 = 17 m away. Since the speed of sound changes with temperature, this minimum distance is slightly different on hot and cold days: on a hotter day sound is faster, so the wall must be a little farther.

Worked example 2: finding the speed from an echo

Question: A boy claps in front of a cliff 165 m away and hears the echo after 1 s. Find the speed of sound.

Working: The sound travels to the cliff and back: 2 × 165 = 330 m in 1 s. Speed = 330 ÷ 1 = 330 m/s.

Repeated reflections from several surfaces can produce multiple echoes. The huge dome of the Golghumat (Gol Gumbaz) at Vijapur in Karnataka is famous for repeating even a whisper many times.

Reverberation

In a closed room or hall, sound is reflected again and again from the walls, floor and roof. The reflections reach us so close together that they merge with the original sound into a prolonged, louder sound that is hard to make out clearly. This persistence of sound is reverberation. It is stronger in an empty, closed house because there is nothing soft to absorb the sound.

Reducing reverberation in halls

  • Absorb sound
    • Heavy curtains and carpets
    • Sound-absorbing boards on walls and ceilings
    • Cushioned seats
  • Shape the hall
    • Curved ceilings that send sound evenly towards the audience
    • Avoid large bare parallel walls

Ordinary classrooms are small, usually less than 17 m long, so the reflected sound returns in less than 0.1 s and no separate echo is heard.

Key takeaways: sound obeys the laws of reflection. Hard surfaces reflect sound well; soft materials absorb it. An echo needs the reflected sound to come back after at least 0.1 s, so the reflector must be at least about 17 m away in air. Reverberation is the persistence of sound by many reflections and is reduced with absorbing materials and suitable shapes.

Check your understanding

  1. 1. Why can we not hear an echo in an ordinary classroom?

    1. Sound does not reflect from walls
    2. The walls are too close, so the reflected sound returns in less than 0.1 s and merges with the original
    3. Classrooms have no air
    4. Echoes are produced only by water
    Show answer

    Answer: B. A distinct echo needs a reflector at least about 17 m away. Classroom walls are nearer, so the reflection returns within 0.1 s and cannot be heard separately.

  2. 2. If the speed of sound is 350 m/s, what is the minimum distance of a reflecting wall for a distinct echo?

    1. 35 m
    2. 70 m
    3. 350 m
    4. 17.5 m
    Show answer

    Answer: D. In 0.1 s sound travels 350 × 0.1 = 35 m. This is there and back, so the wall must be at least 35 ÷ 2 = 17.5 m away.

  3. 3. Which of these is a bad reflector of sound?

    1. A thick curtain
    2. A concrete wall
    3. A metal sheet
    4. A marble floor
    Show answer

    Answer: A. Soft, porous materials such as curtains absorb sound. Hard, flat surfaces like concrete, metal and marble reflect it well.

  4. 4. A girl standing 255 m from a hill hears her echo after 1.5 s. What is the speed of sound?

    1. 170 m/s
    2. 382.5 m/s
    3. 340 m/s
    4. 510 m/s
    Show answer

    Answer: C. The sound travels 2 × 255 = 510 m in 1.5 s. Speed = 510 ÷ 1.5 = 340 m/s.

  5. 5. Reverberation in a large hall can be reduced by

    1. removing all curtains and carpets
    2. covering walls and ceiling with sound-absorbing materials
    3. making the walls of polished marble
    4. keeping the hall empty
    Show answer

    Answer: B. Sound-absorbing materials take up the reflected sound, so it does not persist. Bare hard surfaces and an empty hall increase reverberation.

Sign in to keep track of the lessons you finish.

Next lesson → SONAR, sonography and the human ear

Privacy · Terms · Refunds · Delivery