• Practice
  • About 14 min
  • 5 practice questions

Sound waves: compressions, rarefactions and the features of a wave

Describe sound as a longitudinal wave of compressions and rarefactions, tell it from a transverse wave, and use wavelength, frequency, amplitude and time period to explain pitch and loudness.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why sound needs a medium and how it travels as compressions and rarefactions.
  • Distinguish longitudinal waves from transverse waves.
  • Define wavelength (λ), frequency (ν), amplitude (A) and time period (T), and use ν = 1/T.
  • Relate pitch to frequency and loudness to amplitude.

Sound is a form of energy that produces the sensation of hearing. This energy travels in the form of waves, and these waves need a medium, such as air, water or a solid, to travel. That is why astronauts on the Moon, where there is no air, must talk to each other by radio.

Compressions and rarefactions

When a loudspeaker cone moves forward, it pushes the air in front of it and crowds the particles together: a compression, a region of higher density and pressure. When it moves back, it leaves a region where the particles are spread out: a rarefaction, a region of lower density and pressure. As the cone keeps vibrating, a chain of compressions and rarefactions travels outwards. The particles of air do not travel with the wave; each one only oscillates back and forth about its mean position.

Two kinds of mechanical waves

  • Longitudinal wave
    • Particles oscillate parallel to the direction in which the wave travels
    • Made of compressions and rarefactions
    • Example: sound in air
  • Transverse wave
    • Particles oscillate perpendicular to the direction of the wave
    • Made of crests and troughs
    • Example: ripples when a stone falls into still water (water moves up and down)

Describing a sound wave

If we plot the density (or pressure) of the medium against distance at one instant, we get a wave-like graph: peaks for compressions and valleys for rarefactions, around the average value.

Features of a sound wave
QuantitySymbolMeaningSI unit
Wavelengthλ (lambda)Distance between two neighbouring compressions (or two rarefactions)metre (m)
Frequencyν (nu)Number of oscillations per second at a pointhertz (Hz)
Time periodTTime taken for one oscillation of density or pressure at a pointsecond (s)
AmplitudeAMaximum change in density or pressure from the average valuedepends on the quantity

Frequency and time period are reciprocals: ν = 1/T. High frequency gives high pitch; large amplitude gives a loud sound.

Pitch and loudness

The pitch of a sound, how shrill or deep it is, depends on its frequency. The notes sa, re, ga, ma, pa, dha, ni rise in frequency one after another. A woman's or a child's voice usually has a higher frequency, and so a higher pitch, than a man's. The loudness (strength) of a sound depends on its amplitude: hitting a drum harder makes the skin vibrate with larger amplitude, so the sound is louder but its pitch stays the same.

Worked example 1: frequency from time period

Question: One oscillation of pressure at a point takes 0.002 s. What is the frequency?

Working: ν = 1/T = 1 ÷ 0.002 = 500 Hz. The point goes through 500 compressions and 500 rarefactions every second.

Worked example 2: comparing two sounds

Question: Sound P has frequency 256 Hz and a large amplitude. Sound Q has frequency 512 Hz and a small amplitude. Compare them.

Working: Q has the higher frequency, so it has the higher pitch (it sounds shriller). P has the larger amplitude, so it is louder. Pitch and loudness are separate features: one sound can be louder while the other is shriller.

Key takeaways: sound is a longitudinal wave needing a medium, made of compressions and rarefactions. λ is the distance between successive compressions, ν the number of oscillations per second, T the time for one oscillation (ν = 1/T) and A the maximum change in density or pressure. Frequency sets pitch; amplitude sets loudness.

Check your understanding

  1. 1. In a sound wave travelling through air, the particles of air

    1. move along with the wave to the listener
    2. oscillate perpendicular to the direction of the wave
    3. oscillate back and forth about their mean positions, parallel to the direction of the wave
    4. do not move at all
    Show answer

    Answer: C. Sound is a longitudinal wave: particles oscillate about their mean positions, parallel to the direction in which the wave travels; they do not travel with the wave.

  2. 2. A region in a sound wave where the particles are crowded together is called a

    1. compression
    2. rarefaction
    3. trough
    4. node
    Show answer

    Answer: A. A compression is a region of higher density and pressure. A rarefaction is a region of lower density.

  3. 3. The time period of a sound wave is 0.004 s. What is its frequency?

    1. 4 Hz
    2. 400 Hz
    3. 25 Hz
    4. 250 Hz
    Show answer

    Answer: D. ν = 1/T = 1 ÷ 0.004 = 250 Hz.

  4. 4. Which feature of a sound wave decides its pitch?

    1. Amplitude
    2. Frequency
    3. Speed in air
    4. Distance from the source
    Show answer

    Answer: B. Pitch depends on frequency: higher frequency means a shriller, higher-pitched sound. Amplitude decides loudness.

  5. 5. Waves on the surface of a pond, in which water moves up and down as the wave moves forward, are

    1. transverse waves
    2. longitudinal waves
    3. sound waves
    4. compressions
    Show answer

    Answer: A. When the particles oscillate perpendicular to the direction of the wave, the wave is transverse.

Sign in to keep track of the lessons you finish.

Next lesson → Velocity of sound in different media

Privacy · Terms · Refunds · Delivery