Revision notes

Chapter 12 Study of Sound: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Sound waves: compressions, rarefactions and the features of a wave

Two kinds of mechanical waves

  • Longitudinal wave
    • Particles oscillate parallel to the direction in which the wave travels
    • Made of compressions and rarefactions
    • Example: sound in air
  • Transverse wave
    • Particles oscillate perpendicular to the direction of the wave
    • Made of crests and troughs
    • Example: ripples when a stone falls into still water (water moves up and down)
Features of a sound wave
QuantitySymbolMeaningSI unit
Wavelengthλ (lambda)Distance between two neighbouring compressions (or two rarefactions)metre (m)
Frequencyν (nu)Number of oscillations per second at a pointhertz (Hz)
Time periodTTime taken for one oscillation of density or pressure at a pointsecond (s)
AmplitudeAMaximum change in density or pressure from the average valuedepends on the quantity

Frequency and time period are reciprocals: ν = 1/T. High frequency gives high pitch; large amplitude gives a loud sound.

Key takeaways: sound is a longitudinal wave needing a medium, made of compressions and rarefactions. λ is the distance between successive compressions, ν the number of oscillations per second, T the time for one oscillation (ν = 1/T) and A the maximum change in density or pressure. Frequency sets pitch; amplitude sets loudness.

Read the full lesson

Lesson 2

Velocity of sound in different media

v = λ ÷ T, and since ν = 1/T, v = ν × λ. Also, distance = velocity × time.

Sound is fastest in solids and slowest in gases
StateMediumApproximate speed at 25 °C (m/s)
SolidSteel5960
SolidGlass3980
LiquidSea water1531
LiquidPure water1498
GasHydrogen1284
GasAir346
GasOxygen316

Key takeaways: v = νλ for any wave. Sound travels fastest in solids, slower in liquids and slowest in gases. In a gas, speed rises with √T and falls with √(density) and √(molecular mass), but does not depend on pressure at fixed temperature.

Read the full lesson

Lesson 3

Audible sound, infrasound and ultrasound

Sound classified by frequency

  • Infrasound Below 20 Hz
    • Too low for human ears
    • Produced by earth vibrations before an earthquake
    • The swing of a pendulum is in this range
    • Some large animals such as elephants and whales use very low sounds
  • Audible sound 20 Hz to 20,000 Hz (20 kHz)
    • The range the human ear can hear
    • Speech, music, most everyday sounds
    • Young children can often hear slightly higher frequencies
  • Ultrasound Above 20 kHz
    • Too high for human ears
    • Bats, dolphins and mice can produce it
    • Dogs can hear high frequencies we cannot

Human hearing: 20 Hz to 20,000 Hz. Below 20 Hz is infrasound; above 20 kHz is ultrasound.

Key takeaways: humans hear 20 Hz to 20 kHz. Infrasound lies below this range and ultrasound above it. Bats use ultrasound and their ears to navigate in the dark, as Spallanzani found. Ultrasound is used in industry, food safety and medicine.

Read the full lesson

Lesson 4

Reflection of sound: echo and reverberation

Reflectors of sound

  • Good reflectors
    • Hard, flat surfaces
    • Walls of stone or concrete, metal sheets, hard floors
    • Reflect most of the sound that falls on them
  • Bad reflectors (absorbers)
    • Soft, porous materials
    • Curtains, carpets, clothes, paper, cushioned furniture
    • Absorb sound instead of reflecting it

For a distinct echo: total path = speed × 0.1 s; minimum distance of the reflector = half of that path.

Reducing reverberation in halls

  • Absorb sound
    • Heavy curtains and carpets
    • Sound-absorbing boards on walls and ceilings
    • Cushioned seats
  • Shape the hall
    • Curved ceilings that send sound evenly towards the audience
    • Avoid large bare parallel walls

Key takeaways: sound obeys the laws of reflection. Hard surfaces reflect sound well; soft materials absorb it. An echo needs the reflected sound to come back after at least 0.1 s, so the reflector must be at least about 17 m away in air. Reverberation is the persistence of sound by many reflections and is reduced with absorbing materials and suitable shapes.

Read the full lesson

Lesson 5

SONAR, sonography and the human ear

How SONAR measures depth

  1. Transmit Ultrasonic pulse sent down from the ship.
  2. Travel Pulse moves through water to the sea bed.
  3. Reflect Sea bed or object reflects the pulse.
  4. Receive Receiver converts the echo to electrical signals.
  5. Calculate Depth = speed in water × (time ÷ 2).
How we hear
PartStructuresJob
Outer earPinna and auditory canalFunnel shape collects sound waves and passes them inwards
Middle earEardrum (thin membrane) and a chain of three small bonesCompressions push the eardrum in and rarefactions pull it out, so it vibrates; the bones pass the vibrations on
Inner earCochlea (snail-shaped) and auditory nerveCochlea converts vibrations into electrical signals; the auditory nerve carries them to the brain

SONAR depth = speed of sound in water × half the echo time. Ear: pinna collects, eardrum vibrates, cochlea converts, auditory nerve carries to the brain.

Key takeaways: SONAR and sonography both send out ultrasound and use its reflections. Always halve the echo time to get the one-way distance. The ear works in three stages: outer ear collects, middle ear vibrates and passes on, inner ear converts vibrations into signals for the brain.

Read the full lesson

Privacy · Terms · Refunds · Delivery