- Practice
- About 15 min
- 5 practice questions
Crystalline allotropes: diamond, graphite and fullerene
Relate the structures of diamond, graphite and fullerene to their properties, and explain their uses, including why graphite conducts electricity and diamond does not.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the arrangement of carbon atoms in diamond, graphite and fullerene.
- Explain the hardness of diamond and the softness and conductivity of graphite.
- List the uses of each crystalline allotrope.
- Name the scientists who discovered fullerene.
Diamond is the hardest natural substance; the graphite in a pencil is so soft it rubs off on paper. Yet both are pure carbon. The difference lies entirely in how the carbon atoms are joined to one another.
Diamond
In diamond each carbon atom is joined to four neighbouring carbon atoms by covalent bonds, forming a rigid three-dimensional network. To scratch or break diamond, many strong bonds in all directions must be broken, so it is extremely hard. In India, diamonds have been found mainly at Golconda (Telangana) and Panna (Madhya Pradesh).
- Pure diamond is brilliant and is the hardest natural substance.
- Density about 3.5 g/cm³; very high melting point.
- When heated strongly in oxygen it gives only carbon dioxide.
- Does not dissolve in any solvent; acids and bases have no effect on it.
- A bad conductor of electricity, because all four outer electrons of each atom are used in bonds: there are no free electrons.
Uses: cutting glass and drilling rocks, ornaments, diamond knives for eye surgery, diamond dust for polishing other diamonds, and radiation-protecting windows in spacecraft and satellites.
Graphite
In graphite each carbon atom is bonded to three other carbon atoms, forming flat sheets of hexagonal rings. A crystal is a stack of many such layers held together only weakly, so the layers slip over each other. A single layer of graphite is called graphene. The fourth electron of each atom is not fixed in a bond; these free electrons move through the whole layer.
- Black, soft, brittle and slippery.
- A good conductor of electricity because of its free electrons.
- Leaves a mark on paper as layers rub off.
- Density about 1.9 to 2.3 g/cm³; insoluble in most solvents.
Uses: lubricants, carbon electrodes, pencil lead (graphite mixed with clay, a process discovered by Nicolas-Jacques Conté in 1795), paints and polishes, and arc lamps that give a very bright light.
Diamond and graphite
-
Diamond
- Each C bonded to 4 others
- 3-D rigid network
- Hardest natural substance
- Transparent and brilliant
- No free electrons: does not conduct
- Used in cutting tools and jewellery
-
Graphite
- Each C bonded to 3 others
- Flat hexagonal layers
- Soft and slippery
- Black and opaque
- Free electrons: conducts electricity
- Used in electrodes, pencils, lubricants
Fullerene
Fullerene is a rare allotrope found in soot and in interstellar space. The first one discovered was buckminsterfullerene, C₆₀, a ball-shaped molecule of 60 carbon atoms arranged in pentagons and hexagons like a football. It is named after the architect Richard Buckminster Fuller, whose geodesic domes have a similar shape. Harold Kroto, Robert Curl and Richard Smalley received the Nobel Prize in Chemistry in 1996 for discovering it. Other fullerenes include C₇₀, C₇₆, C₈₂ and C₈₆. Fullerene molecules occur as buckyballs and as tube-shaped buckytubes (carbon nanotubes); a fullerene molecule may contain from about 30 to 900 carbon atoms. Fullerenes dissolve in organic solvents such as carbon disulphide. They are used as insulators and as catalysts in water purification, and at certain temperatures they show superconductivity.
Worked example 1: testing conductivity
Question: A pencil lead is connected in a circuit with a cell and a small bulb, and the bulb glows. A diamond placed in the same circuit does not light the bulb. Explain.
Working: In graphite, each carbon uses only three of its four outer electrons in bonds; the fourth is free to move through the layer and carries the current, so the bulb glows. In diamond all four outer electrons are held in bonds, so there are no free electrons and no current flows.
Worked example 2: choosing the right allotrope
Question: Which allotrope suits each job: (a) the bearing of a machine that needs a dry lubricant, (b) the tip of a rock drill, (c) the electrode of a cell?
Working: (a) Graphite: its layers slide over each other easily. (b) Diamond: it is the hardest natural substance. (c) Graphite: it conducts electricity and does not react easily.
Key takeaways: structure decides properties. Diamond's four-bond 3-D network makes it hard and non-conducting; graphite's three-bond layers make it soft, slippery and conducting; fullerene's ball and tube molecules give it special uses. All three are crystalline forms of pure carbon.
Check your understanding
-
1. Why is diamond extremely hard?
- It has free electrons
- Its atoms form slippery layers
- Each carbon atom is bonded to four others in a rigid three-dimensional network
- It contains metal atoms
Show answer
Answer: C. In diamond every carbon atom is covalently bonded to four others in all directions, forming a rigid 3-D network that is very hard to break.
-
2. Why does graphite conduct electricity?
- Each carbon atom has one electron that is free to move within its layer
- It is a metal
- It contains water
- Its atoms are bonded to four neighbours
Show answer
Answer: A. Each carbon in graphite bonds to three others, leaving one electron free to move through the layer and carry current.
-
3. Pencil lead is made by mixing graphite with
- lead metal
- sulphur
- diamond dust
- clay
Show answer
Answer: D. Despite its name, pencil lead contains no lead: it is graphite mixed with clay.
-
4. Which scientists received the Nobel Prize in Chemistry in 1996 for discovering fullerene C₆₀?
- Wöhler, Liebig and Volta
- Kroto, Curl and Smalley
- Conté, Fuller and Volta
- Curie, Bohr and Raman
Show answer
Answer: B. Harold Kroto, Robert Curl and Richard Smalley shared the 1996 Nobel Prize in Chemistry for the discovery of buckminsterfullerene.
-
5. Which use of graphite depends on its layers sliding over each other?
- As a lubricant
- In arc lamps
- As an electrode
- In radiation windows
Show answer
Answer: A. Weakly held layers slide easily, so graphite reduces friction as a lubricant. Electrodes and arc lamps depend mainly on its conductivity.
Sign in to keep track of the lessons you finish.