- Practice
- About 13 min
- 5 practice questions
Non-crystalline carbon: coal, charcoal and coke
Describe the four types of coal in order of formation and carbon content, explain how charcoal and coke are made, and list the uses of these amorphous forms of carbon.
If something looks wrong, please tell us.
By the end of this lesson you can
- Arrange peat, lignite, bituminous coal and anthracite by formation and carbon content.
- Explain why peat gives little heat and anthracite gives much.
- Describe how plant and animal charcoal and coke are obtained.
- List the uses of coal, charcoal and coke.
Most of the carbon we burn for energy is not diamond or graphite but non-crystalline carbon, in which the atoms are not arranged in a regular pattern. Coal, charcoal and coke are the important non-crystalline (amorphous) forms of carbon.
Coal: a fossil fuel
Coal formed over millions of years from plants buried under layers of soil, where high pressure and temperature changed them slowly. It is a solid fossil fuel containing carbon, hydrogen and oxygen, with some nitrogen, phosphorus and sulphur. As the change continued, water and other substances were driven out and the proportion of carbon rose.
Stages in the formation of coal
- Peat First step; much water; less than 60% carbon; gives little heat.
- Lignite Formed from peat under more pressure and heat; 60-70% carbon.
- Bituminous coal Third step; 70-90% carbon.
- Anthracite Hard, purest form of coal; about 95% carbon.
Uses of coal: fuel in homes and factories; production of coke, coal gas and coal tar; and generation of electricity in thermal power stations.
Charcoal
- Wood (plant) charcoal is made by burning wood in an insufficient supply of air, so that water and volatile substances are driven off and mostly carbon remains.
- Animal charcoal is made from animal bones, horns and similar material.
- Charcoal is used in purifying water and other materials, because its porous surface holds impurities.
Coke
When coal is heated strongly in the absence of air, coal gas and other volatile substances are driven out. The nearly pure carbon left behind is coke.
- Used as a domestic and industrial fuel.
- Used as a reducing agent, for example in extracting metals from their oxides.
- Used to make gaseous fuels: water gas (CO + H₂) and producer gas (CO + H₂ + CO₂ + N₂).
| Form | How obtained | Main uses |
|---|---|---|
| Coal | Formed naturally from buried plants over millions of years | Fuel, thermal power, coke, coal gas, coal tar |
| Charcoal | Wood burnt in limited air; or from bones and horns | Fuel, purification of water and other materials |
| Coke | Coal heated without air, after removing coal gas | Fuel, reducing agent, water gas and producer gas |
Worked example 1: identifying a coal sample
Question: Laboratory analysis shows that sample X has 65% carbon and sample Y has 85% carbon. Identify each and say which gives more heat per kilogram.
Working: 65% lies in the 60-70% range: X is lignite. 85% lies in the 70-90% range: Y is bituminous coal. Y has more carbon and less water and other matter, so it gives more heat on burning.
Worked example 2: why limited air for charcoal?
Question: Why must wood be burnt in a limited supply of air to make charcoal?
Working: In plenty of air, the carbon in wood would itself burn completely to carbon dioxide, leaving only ash. In limited air, the heat drives off water and volatile substances, but there is not enough oxygen to burn away the carbon. So carbon-rich charcoal remains.
Peat → lignite → bituminous coal → anthracite: more pressure and heat, more carbon, more heat on burning. Coke = coal heated without air.
Key takeaways: coal formed in four stages with rising carbon content: peat (under 60%), lignite (60-70%), bituminous (70-90%), anthracite (about 95%). Charcoal is made by burning wood in limited air, or from bones and horns. Coke is left after heating coal without air and is a fuel and reducing agent.
Check your understanding
-
1. Which type of coal has the highest percentage of carbon?
- Peat
- Lignite
- Bituminous coal
- Anthracite
Show answer
Answer: D. Anthracite, the last stage of coal formation, is hard and contains about 95% carbon.
-
2. Why does peat give little heat on burning?
- It contains a high proportion of water and less than 60% carbon
- It is pure carbon
- It is a crystalline form
- It contains no carbon
Show answer
Answer: A. Peat is the first stage of coal; it has much water and a low carbon content, so it gives little heat.
-
3. A coal sample contains 75% carbon. It is most likely
- peat
- lignite
- bituminous coal
- anthracite
Show answer
Answer: C. Bituminous coal contains 70% to 90% carbon; 75% falls in this range.
-
4. How is wood charcoal made?
- By heating coal without air
- By burning wood in an insufficient supply of air
- By dissolving wood in water
- By compressing graphite
Show answer
Answer: B. Burning wood in limited air removes water and volatile matter but leaves the carbon unburnt as charcoal.
-
5. Which use of coke depends on its ability to remove oxygen from metal oxides?
- As a reducing agent
- As a domestic fuel
- In pencils
- In ornaments
Show answer
Answer: A. A reducing agent removes oxygen from a compound; coke does this when metals are extracted from their oxides.
Sign in to keep track of the lessons you finish.