• Practice
  • About 14 min
  • 5 practice questions

Reflecting telescopes: Newtonian and Cassegrain

Explain why large telescopes use concave mirrors, describe the light paths in Newtonian and Cassegrain telescopes, and know about large optical telescopes in India.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Give the advantages of mirrors over lenses for large telescopes.
  • Describe the Newtonian telescope and the role of its plane mirror.
  • Describe the Cassegrain telescope and the role of its convex mirror.
  • Name the large 3.6 m optical telescope at Nainital.

You learnt in the chapter on reflection of light that a concave mirror converges parallel rays to its focus. Light from a distant star arrives as almost parallel rays, so a large concave mirror can collect it and bring it to a focus, just as an objective lens does, but without the lens's problems. Telescopes that use mirrors in this way are called reflecting telescopes.

Why mirrors are better for large telescopes

  • It is easier to make a large mirror than a large lens, since only one surface has to be shaped accurately.
  • Large mirrors can be built by joining several smaller pieces.
  • A mirror can be supported from behind and weighs less than a lens of the same size.
  • Mirrors reflect all colours in the same way, so their images have no colour errors.

Only with such large telescopes can we see very faint, distant stars and galaxies that the naked eye could never show.

The Newtonian telescope

Light from space falls on a large concave mirror at the bottom of the tube and is reflected towards its focus. Before the rays meet, a small plane mirror placed at an angle in the tube reflects them sideways, so they come to a focus at a point to the side of the tube, perpendicular to its axis. The eyepiece is fixed in the side of the tube and gives a magnified image.

The Cassegrain telescope

This also uses a large concave mirror. After reflection from it, the rays are sent back towards it by a small convex mirror. They pass through a hole at the centre of the concave mirror and reach the eyepiece placed behind the main mirror, which gives a magnified image. Folding the light path this way keeps the telescope short.

Two designs of reflecting telescope

  • Newtonian
    • Primary: large concave mirror
    • Secondary: small plane mirror, tilted
    • Light sent out sideways
    • Eyepiece on the side of the tube
  • Cassegrain
    • Primary: large concave mirror with a central hole
    • Secondary: small convex mirror
    • Light sent back through the hole
    • Eyepiece behind the main mirror

Large optical telescopes in India

India has several optical telescopes with 2 m mirrors. A 3.6 m optical telescope, among the largest in India, is at the Aryabhatta Research Institute of Observational Sciences (ARIES) near Nainital in Uttarakhand. Such telescopes are built on mountains, away from city lights.

Worked example 1: which mirror goes where?

Question: Which telescope design uses (a) a concave and a plane mirror, (b) a concave and a convex mirror, (c) only lenses? Where is the eyepiece in each?

Working: (a) Newtonian: eyepiece on the side of the tube. (b) Cassegrain: eyepiece behind the main mirror, light passing through its central hole. (c) Refracting telescope: eyepiece at the end opposite the objective lens.

Worked example 2: comparing two mirrors

Question: How many times more light does a 3.6 m mirror collect than a 2 m mirror?

Working: Ratio = (3.6 ÷ 2)² = 1.8² = 3.24 times. A bigger mirror shows fainter objects and gives brighter images.

Reflecting telescopes: a large concave mirror collects light. Newtonian adds a plane mirror (eyepiece at the side); Cassegrain adds a convex mirror (eyepiece behind).

Key takeaways: large telescopes use concave mirrors because mirrors are easier to make large, lighter, can be built from pieces and have no colour errors. The Newtonian telescope uses a tilted plane mirror to send light to a side eyepiece; the Cassegrain uses a convex mirror to send light back through a hole in the main mirror.

Check your understanding

  1. 1. Which type of mirror collects the light in a reflecting telescope?

    1. Plane mirror
    2. Convex mirror
    3. Concave mirror
    4. No mirror; a lens
    Show answer

    Answer: C. A large concave mirror converges the nearly parallel rays from a star to a focus.

  2. 2. In a Newtonian telescope, what does the small plane mirror do?

    1. It reflects the converging rays sideways to an eyepiece on the side of the tube
    2. It magnifies the image
    3. It sends light back through a hole in the main mirror
    4. It blocks sunlight
    Show answer

    Answer: A. The tilted plane mirror turns the light towards the side, so the image forms at the side of the tube where the eyepiece is.

  3. 3. In a Cassegrain telescope, the eyepiece is placed

    1. at the side of the tube
    2. in front of the convex mirror
    3. on top of the tube
    4. behind the main concave mirror, receiving light through its central hole
    Show answer

    Answer: D. The small convex mirror sends light back through a hole in the centre of the concave mirror to the eyepiece behind it.

  4. 4. Which is an advantage of mirrors over lenses in large telescopes?

    1. Mirrors produce chromatic aberration
    2. Mirrors have no colour errors and can be made large from smaller pieces
    3. Mirrors make the telescope longer
    4. Mirrors cannot be supported from behind
    Show answer

    Answer: B. Mirrors reflect all colours alike, so there is no chromatic aberration, and large mirrors can be made by joining pieces.

  5. 5. A 4 m mirror is compared with a 2 m mirror. How many times more light does it collect?

    1. 2 times
    2. 8 times
    3. 4 times
    4. 16 times
    Show answer

    Answer: C. Light collected ∝ diameter². (4 ÷ 2)² = 2² = 4 times.

Sign in to keep track of the lessons you finish.

Next lesson → Radio telescopes and the GMRT

Privacy · Terms · Refunds · Delivery