• Practice
  • About 13 min
  • 5 practice questions

Refracting telescopes and their limits

Describe how a refracting telescope uses an objective lens and an eyepiece, explain why a large objective gives a brighter image, and state the three difficulties of large refracting telescopes.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name the two lenses of a refracting telescope and their roles.
  • Explain why the objective is made as large as possible.
  • State the three main difficulties with large refracting telescopes.
  • Compare light-collecting power using area.

The telescopes of Lippershey and Galileo used lenses. Such telescopes are still used by amateur sky watchers, and they show how a telescope collects and magnifies light.

How a refracting telescope works

Most optical telescopes of this kind use two or more lenses. The large lens at the front, facing the sky, is the objective lens; its job is to collect as much light as possible from a heavenly object. A smaller lens near the eye, the eyepiece, uses the light collected by the objective to produce a magnified image. Light rays change direction as they pass from air into the lens and again as they leave it. This bending is refraction, so these are called refracting telescopes. (Image formation by lenses is studied in the next standard.)

Path of light in a refracting telescope

  1. Light from a star Faint light arrives from far away.
  2. Objective lens Large lens collects light and refracts it to form an image.
  3. Tube Keeps the lenses aligned at the right distance.
  4. Eyepiece Small lens magnifies the image.
  5. Observer's eye Sees a bright, enlarged image.

Why a big objective?

The amount of light a lens collects depends on its area, and area depends on the square of the diameter. Doubling the diameter of the objective makes it collect four times as much light, so fainter and more distant objects become visible.

Light collected ∝ area ∝ (diameter)². Double the diameter → four times the light.

Difficulties with large refracting telescopes

  1. Large lenses are hard to make, very heavy, and tend to sag and get distorted under their own weight, since they can be held only at the edges.
  2. The telescope becomes very long: the objective and eyepiece are at opposite ends, and the tube length grows with the size of the lenses, making the telescope hard to handle.
  3. Colour errors: a lens bends different colours by slightly different amounts, so images have coloured fringes. This defect is called chromatic aberration.

These problems are overcome by using mirrors instead of a large objective lens, as you will see in the next lesson.

Worked example 1: comparing light collection

Question: Telescope A has an objective of diameter 10 cm and telescope B has 30 cm. How many times more light does B collect?

Working: Ratio of light = (30 ÷ 10)² = 3² = 9 times. B can show objects about nine times fainter than A can.

Worked example 2: telescope versus eye

Question: Take the pupil of a dark-adapted eye to be about 7 mm wide. How many times more light does a 70 mm telescope objective collect?

Working: Ratio of diameters = 70 ÷ 7 = 10. Ratio of light = 10² = 100 times. Even a small telescope reveals many stars invisible to the naked eye, as Galileo found.

Parts and problems of a refracting telescope

  • Parts
    • Objective lens: collects light
    • Eyepiece: magnifies
    • Tube: holds lenses apart
  • Problems when made large
    • Heavy lenses that distort
    • Very long tube
    • Chromatic aberration (colour errors)

Key takeaways: a refracting telescope has an objective lens to collect light and an eyepiece to magnify. A bigger objective collects more light in proportion to the square of its diameter. But very large lenses are heavy and distort, the telescope becomes very long, and images suffer from chromatic aberration.

Check your understanding

  1. 1. What is the main job of the objective lens of a telescope?

    1. To collect as much light as possible from the object
    2. To magnify the final image only
    3. To block sunlight
    4. To change the colour of the star
    Show answer

    Answer: A. The large objective collects light; the eyepiece magnifies the image formed from that light.

  2. 2. Why are telescopes using lenses called refracting telescopes?

    1. Because they reflect light from mirrors
    2. Because they use radio waves
    3. Because light bends (refracts) as it enters and leaves the lenses
    4. Because they work only in daylight
    Show answer

    Answer: C. Lenses form images by refraction, the bending of light as it passes between air and glass.

  3. 3. What is chromatic aberration?

    1. The image being upside down
    2. Colour errors in the image because a lens bends different colours differently
    3. The tube becoming too long
    4. The lens melting in sunlight
    Show answer

    Answer: B. A lens refracts different colours by different amounts, so images show coloured fringes. Mirrors do not have this defect.

  4. 4. Objective X has diameter 20 cm and objective Y has 5 cm. How many times more light does X collect?

    1. 4 times
    2. 8 times
    3. 15 times
    4. 16 times
    Show answer

    Answer: D. Light collected ∝ diameter². (20 ÷ 5)² = 4² = 16 times.

  5. 5. Which is NOT a difficulty of very large refracting telescopes?

    1. Large lenses are heavy and get distorted
    2. The telescope tube becomes very long
    3. Images have colour errors
    4. They cannot collect any light
    Show answer

    Answer: D. Refracting telescopes do collect light well; their problems are heavy distorting lenses, great length and chromatic aberration.

Privacy · Terms · Refunds · Delivery