- Practice
- About 17 min
- 5 practice questions
Salts, water of crystallisation and electrolysis
Classify salts as acidic, basic or neutral, explain water of crystallisation, and describe how ions conduct electricity in solutions, including the electrolysis of copper sulphate and of water.
If something looks wrong, please tell us.
By the end of this lesson you can
- Classify salts as neutral, acidic or basic from the acid and base that form them.
- Explain water of crystallisation with examples and formulae.
- Explain why solutions of salts, strong acids and strong bases conduct electricity.
- Describe electrolysis, name the electrodes and write the electrode reactions for copper sulphate and water.
A neutralization reaction always makes a salt, but the salt solution is not always neutral. Salts also hide water inside their crystals, and their solutions can carry electric current. This lesson completes the chapter with these properties of salts and ions.
Neutral, acidic and basic salts
| Formed from | Type of salt | pH of its solution | Examples |
|---|---|---|---|
| Strong acid + strong base | Neutral salt | 7 | NaCl, KCl, Na₂SO₄, KBr |
| Strong acid + weak base | Acidic salt | Less than 7 | NH₄Cl, NH₄NO₃ |
| Weak acid + strong base | Basic salt | More than 7 | Na₂CO₃, CH₃COONa (sodium acetate), NaHCO₃ |
Worked example 1: predicting pH
Question: Will a solution of ammonium chloride be acidic, basic or neutral? Working: NH₄Cl comes from HCl (a strong acid) and NH₃/NH₄OH (a weak base), so it is an acidic salt, and its solution has pH less than 7. Sodium acetate, from weak acetic acid and strong NaOH, would give pH more than 7.
Water of crystallisation
Ionic compounds are crystalline: their ions are arranged in a definite pattern. In the crystals of some compounds, water molecules are also part of this arrangement in a fixed proportion. This water is called water of crystallisation, and it is written in the formula after a dot.
- Blue vitriol (copper sulphate crystals): CuSO₄·5H₂O
- Green vitriol (ferrous sulphate crystals): FeSO₄·7H₂O
- Washing soda crystals: Na₂CO₃·10H₂O
- Alum crystals: K₂SO₄·Al₂(SO₄)₃·24H₂O
Heat blue vitriol gently and drops of water collect at the cool upper part of the test tube while the blue crystals crumble into a white powder: CuSO₄·5H₂O → CuSO₄ + 5H₂O. Add water to the cooled white powder and the same blue colour comes back, showing that the copper sulphate itself was not changed into a new substance; only its water of crystallisation was driven out. Heating alum similarly drives off its water and leaves fluffy 'puffed alum'.
Ions carry current in solutions
Dip two bare wires, connected through a bulb and switch to a 6 V battery, into different solutions. The bulb glows with solutions of NaCl, CuSO₄, dilute H₂SO₄ and dilute NaOH, but not with glucose or urea. Salts, strong acids and strong bases dissociate almost completely, so their solutions contain many ions. In metal wires electrons carry the current; in liquids and solutions ions carry it: cations move towards the negative electrode and anions towards the positive electrode.
The rods or plates dipped in the liquid are electrodes. The one joined to the negative terminal of the battery is the cathode; the one joined to the positive terminal is the anode. A container with the liquid (the electrolyte) and the electrodes is an electrolytic cell. Substances that dissociate a lot (salts, strong acids, strong bases) are strong electrolytes and conduct well; weak acids and weak bases are weak electrolytes.
Electrolysis
Decomposition of a substance in solution by an electric current is called electrolysis. Pass current through copper sulphate solution with a copper plate as anode and a carbon rod as cathode. Copper is deposited on the cathode, yet the blue colour of the solution stays the same.
- Cathode reaction: Cu²⁺(aq) + 2e⁻ → Cu(s). Copper ions are attracted to the cathode and gain electrons to become copper atoms.
- Anode reaction: Cu(s) → Cu²⁺(aq) + 2e⁻. Copper atoms of the anode lose electrons and enter the solution as ions, replacing those removed, which is why the colour does not fade.
The two electrodes
-
Cathode
- Joined to the negative terminal
- Attracts cations
- Ions gain electrons here
- Copper is deposited; hydrogen forms in water electrolysis
-
Anode
- Joined to the positive terminal
- Attracts anions
- Electrons are removed here
- Copper anode dissolves; oxygen forms in water electrolysis
Electrolysis of water
Pure water hardly conducts, because it has only 1 × 10⁻⁷ mol/L each of H⁺ and OH⁻. Dissolve a little salt (or a little acid or base) in it and it conducts, and water is electrolysed. Gas bubbles form at both electrodes; the volume of gas at the cathode is double that at the anode. The gas at the cathode is hydrogen and at the anode oxygen: Cathode: 2H₂O + 2e⁻ → H₂ + 2OH⁻. Anode: 2H₂O → O₂ + 4H⁺ + 4e⁻.
Worked example 2: gas volumes
Question: In an electrolysis of water, 15 mL of gas collects at the anode. How much gas collects at the cathode, and which gases are they? Working: The anode gives oxygen, 15 mL. The cathode gives hydrogen, twice the volume: 30 mL.
Strong acid + strong base gives a neutral salt; strong acid + weak base, an acidic salt; weak acid + strong base, a basic salt. In electrolysis, cations go to the cathode (negative) and anions to the anode (positive).
Key takeaways: a salt's pH depends on the strength of the acid and base it comes from. Many salt crystals contain water of crystallisation in a fixed ratio. Ions conduct electricity in solutions, and the current can decompose the solute or the water: electrolysis. Water gives hydrogen and oxygen in the ratio 2 : 1 by volume.
Check your understanding
-
1. Which salt gives a solution with pH greater than 7?
- Sodium chloride
- Ammonium chloride
- Potassium sulphate
- Sodium carbonate
Show answer
Answer: D. Sodium carbonate comes from a weak acid (carbonic acid) and a strong base (NaOH), so it is a basic salt with pH more than 7. NaCl and K₂SO₄ are neutral, and NH₄Cl is acidic.
-
2. What is the formula of blue vitriol?
- CuSO₄·5H₂O
- FeSO₄·7H₂O
- Na₂CO₃·10H₂O
- CuSO₄
Show answer
Answer: A. Blue vitriol is crystalline copper sulphate with five molecules of water of crystallisation: CuSO₄·5H₂O. Without the water, CuSO₄ is a white powder.
-
3. In an electrolytic cell, the electrode connected to the negative terminal of the battery is called the
- anode
- cathode
- electrolyte
- indicator
Show answer
Answer: B. The cathode is the electrode joined to the negative terminal. Positive ions (cations) move towards it and gain electrons there.
-
4. During the electrolysis of water, which gas collects at the cathode and how does its volume compare with the gas at the anode?
- Oxygen; half the volume
- Hydrogen; the same volume
- Hydrogen; twice the volume
- Oxygen; twice the volume
Show answer
Answer: C. Hydrogen is formed at the cathode and oxygen at the anode. Water has two hydrogen atoms for each oxygen atom, and the hydrogen volume collected is twice the oxygen volume.
-
5. Which of these is a weak electrolyte?
- Sodium chloride
- Sulphuric acid
- Sodium hydroxide
- Acetic acid
Show answer
Answer: D. Acetic acid dissociates only partly in water, so it gives few ions and is a weak electrolyte. Salts, strong acids and strong bases dissociate almost completely and are strong electrolytes.
Sign in to keep track of the lessons you finish.