- Practice
- About 16 min
- 5 practice questions
Strength, basicity, acidity and concentration
Classify acids and bases as strong or weak, identify alkalis, find the basicity of acids and the acidity of bases, and express the concentration of a solution in g/L and in molarity.
If something looks wrong, please tell us.
By the end of this lesson you can
- Tell strong acids and bases from weak ones by how much they dissociate.
- Explain what an alkali is.
- Find the basicity of an acid and the acidity of a base from its formula.
- Calculate concentration in g/L and in mol/L (molarity).
Hydrochloric acid in a laboratory bottle and acetic acid in kitchen vinegar are both acids, yet one is far more corrosive. Lemon juice in a little water tastes sharper than the same juice in a big glass of water. These differences come from two separate ideas: how strong an acid or base is, and how concentrated its solution is.
Strong and weak acids and bases
Acids and bases are called strong or weak according to how completely they dissociate in water.
| Type | Behaviour in water | Examples |
|---|---|---|
| Strong acid | Dissociates almost completely; mostly H⁺ and the acidic radical | HCl, HBr, HNO₃, H₂SO₄ |
| Weak acid | Dissociates only partly; mostly undissociated molecules | Acetic acid CH₃COOH, carbonic acid (CO₂ in water) |
| Strong base | Dissociates almost completely; mostly OH⁻ and the basic radical | NaOH, KOH, Ca(OH)₂, Na₂O |
| Weak base | Dissociates only partly | Ammonia NH₃ |
Bases that are highly soluble in water are called alkalis, for example NaOH, KOH and NH₃. NaOH and KOH are strong alkalis, while ammonia is a weak base even though it is very soluble. So 'alkali' is about solubility and 'strong' is about dissociation.
Basicity and acidity
The basicity of an acid is the number of H⁺ ions obtainable from one molecule of it. The acidity of a base is the number of OH⁻ ions obtainable from one molecule of it. Note that only the H atoms that can come off as H⁺ count: acetic acid, CH₃COOH, has four H atoms, but only one (in COOH) is released, so it is monobasic.
Classifying by basicity and acidity
-
Acids by basicity
- Monobasic (1 H⁺): HCl, HNO₃, CH₃COOH
- Dibasic (2 H⁺): H₂SO₄, H₂CO₃
- Tribasic (3 H⁺): H₃PO₄, H₃BO₃
-
Bases by acidity
- Monoacidic (1 OH⁻): NaOH, KOH, NH₄OH
- Diacidic (2 OH⁻): Ca(OH)₂, Ba(OH)₂
- Triacidic (3 OH⁻): Al(OH)₃, Fe(OH)₃
Concentration of a solution
Every property of a solution depends on what the solute and solvent are, and on the proportion of solute in the solution, which is called its concentration. A solution with a high proportion of solute is concentrated; one with a low proportion is dilute. Two units are used most often:
- Grams per litre (g/L): mass of solute in grams dissolved in one litre of solution.
- Molarity (M), in mol/L: number of moles of solute dissolved in one litre of solution. It is shown by writing the formula in square brackets: [NaCl] = 1 means the salt solution is 1 M (one molar).
Concentration (g/L) = mass of solute in g ÷ volume of solution in L. Molarity (mol/L) = moles of solute ÷ volume of solution in L, where moles = mass ÷ molecular mass.
Worked example 1: sodium hydroxide solution
Question: 4 g of NaOH is dissolved to make 500 mL of solution. Find the concentration in g/L and the molarity. (NaOH = 40)
Working: Volume = 500 mL = 0.5 L. Concentration = 4 ÷ 0.5 = 8 g/L. Moles = 4 ÷ 40 = 0.1 mol. Molarity = 0.1 ÷ 0.5 = 0.2 M. Shortcut: molarity = (g/L) ÷ molecular mass = 8 ÷ 40 = 0.2 M.
Worked example 2: common salt solution
Question: 5.85 g of NaCl is dissolved to make 250 mL of solution. Find g/L and molarity. (NaCl = 58.5)
Working: 250 mL = 0.25 L. Concentration = 5.85 ÷ 0.25 = 23.4 g/L. Moles = 5.85 ÷ 58.5 = 0.1 mol. Molarity = 0.1 ÷ 0.25 = 0.4 M.
Worked example 3: from molarity to mass
Question: What mass of H₂SO₄ is needed to make 1 L of 0.1 M solution? (H₂SO₄ = 98) Working: Moles needed = 0.1 × 1 = 0.1 mol. Mass = 0.1 × 98 = 9.8 g.
Key takeaways: 'strong' and 'weak' tell how completely a substance dissociates; 'concentrated' and 'dilute' tell how much of it is in the solution. Basicity counts H⁺ per acid molecule and acidity counts OH⁻ per base molecule. Always change millilitres to litres before calculating g/L or molarity.
Check your understanding
-
1. Which of these is a strong acid?
- Acetic acid
- Carbonic acid
- Nitric acid
- Carbon dioxide in water
Show answer
Answer: C. Nitric acid, HNO₃, dissociates almost completely in water, so it is a strong acid. Acetic acid and carbonic acid (formed from CO₂ in water) dissociate only partly, so they are weak.
-
2. What is the basicity of phosphoric acid, H₃PO₄?
- 1
- 2
- 4
- 3
Show answer
Answer: D. One molecule of H₃PO₄ can give three H⁺ ions, so its basicity is 3: it is a tribasic acid.
-
3. An alkali is
- any acid that is very strong
- a base that is highly soluble in water
- a salt with pH 7
- any substance containing oxygen
Show answer
Answer: B. Alkalis are bases that dissolve readily in water, such as NaOH, KOH and NH₃. Being an alkali is about solubility; ammonia is an alkali but still a weak base.
-
4. 4 g of NaOH is dissolved to make 250 mL of solution. What is its molarity? (NaOH = 40)
- 0.1 M
- 0.4 M
- 16 M
- 0.025 M
Show answer
Answer: B. Moles = 4 ÷ 40 = 0.1 mol. Volume = 250 mL = 0.25 L. Molarity = 0.1 ÷ 0.25 = 0.4 M.
-
5. 2.5 g of a solute is dissolved to make 500 mL of solution. What is the concentration in g/L?
- 5 g/L
- 1.25 g/L
- 0.005 g/L
- 200 g/L
Show answer
Answer: A. Volume = 500 mL = 0.5 L. Concentration = 2.5 g ÷ 0.5 L = 5 g/L. Dividing by 500 instead of 0.5 gives the wrong 0.005.
Sign in to keep track of the lessons you finish.