- Foundation
- About 12 min
- 5 practice questions
Dot situation: mixed practice and exam method
Use a short routine to solve any dot-situation question and avoid the standard traps.
If something looks wrong, please tell us.
All dot questions are solved by the same routine: label the regions, translate the words, then pick or count.
Routine
- Draw or imagine the regions and name them: T only, C only, S only, T and C only, and so on, with the middle region.
- Write what the question asks as 'in' and 'out' lists.
- Find the matching region or regions in the table.
- Count dots or find dots in those regions.
- Check the word 'only' and whether the middle region is allowed.
Traps
| Slip | Fix |
|---|---|
| Forgetting that 'in the circle and the triangle' includes the middle region | List both region 4 and region 7 |
| Counting a dot twice because it lies in two figures | Count each dot once, in the region where it sits |
| Reading 'but not' as 'only' | Write out the in and out lists |
| Mixing up which figure is which | Label the figures T, C, S before you start |
Worked examples
Example 1. Dots are in regions 1, 2, 3, 4, 5, 6, 7 (one in each). How many dots are in exactly one figure, and how many are in at least two figures? Working: exactly one: regions 1, 2, 3, which is 3 dots. At least two: regions 4, 5, 6, 7, which is 4 dots. Answer: 3 and 4.
Example 2. Dots are in regions 4, 4, 7, 6. How many are in the circle but not the square? Working: the circle holds 2, 4, 5, 7; remove regions in the square (5 and 7). That leaves 2 and 4. Region 4 has 2 dots. Answer: 2.
Example 3. A dot must be in the square and the triangle but not the circle. Which region is it, and can it also be in the circle? Working: in S and T, out of C. Answer: region 6, and no, it cannot be in the circle.
Label the regions, write in and out lists, find the matching regions, then count.
Key takeaways: use the routine, list in and out conditions, and take care with the words 'only' and 'but not'.
Check your understanding
-
1. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. One dot is placed in each of the seven regions. How many dots are in at least two figures?
- 3
- 4
- 7
- 6
Show answer
Answer: B. At least two figures means regions 4, 5, 6 and 7 (the middle region is in all three, which is at least two). That is 4 dots. Answering 3 forgets region 7.
-
2. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. Dots are in regions 4, 4, 7, 6. How many are in the circle but not the square?
- 3
- 1
- 4
- 2
Show answer
Answer: D. The circle holds 2, 4, 5, 7; remove regions in the square (5, 7), leaving 2 and 4. Region 4 has 2 dots, region 2 none: answer 2.
-
3. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. Dots are in regions 2, 5, 5, 3. How many are in the circle but not the triangle?
- 3
- 2
- 4
- 1
Show answer
Answer: A. The circle holds 2, 4, 5, 7; remove regions in the triangle (4, 7), leaving 2 and 5. Region 2 has 1 dot and region 5 has 2: total 3.
-
4. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. A dot sits in region 7. A student counts the dots 'in the triangle', 'in the circle' and 'in the square' and adds the three counts to get the total number of dots. What is the slip?
- Region 7 is outside every figure
- Region 7 belongs only to the triangle
- The region-7 dot is counted three times; each dot should be counted once, where it sits
- There is no slip
Show answer
Answer: C. A dot in the middle region is inside all three figures, so adding the three figure counts includes it three times. Count each dot once, in the region where it sits.
-
5. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. A dot must be in the square and the triangle but not the circle. Which region is it?
- Region 7
- Region 3
- Region 6
- Region 5
Show answer
Answer: C. In S and T, out of C is region 6. Region 7 is excluded because it is inside the circle.
Sign in to keep track of the lessons you finish.