• Foundation
  • 15 practice questions

Final self-assessment: Dot Situation

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions without looking back at the lessons, then check your answers and read each explanation. The questions are a little harder than the checks after each lesson.

Final self-assessment

  1. 1. A circle and a triangle overlap. Dots: 3 in circle only, 2 in the overlap, 4 in triangle only, 1 outside both. How many dots are in exactly one of the two figures?

    1. 9
    2. 7
    3. 5
    4. 10
    Show answer

    Answer: B. Exactly one figure means circle only or triangle only: 3 + 4 = 7. The 2 overlap dots are in both, and the outside dot is in neither.

  2. 2. A circle and a triangle overlap. Dots: 5 in circle only, 2 in the overlap, 1 in triangle only. How many dots are inside the triangle?

    1. 1
    2. 8
    3. 7
    4. 3
    Show answer

    Answer: D. Inside the triangle = triangle only + overlap = 1 + 2 = 3.

  3. 3. A dot sits exactly outside both of two overlapping figures. Which statement about it is correct?

    1. It is in the overlap
    2. It is in neither figure
    3. It is in both figures
    4. It is in whichever figure is nearer
    Show answer

    Answer: B. Outside both boundaries means the dot is inside no figure. Nearness does not matter; only being inside the boundary counts.

  4. 4. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. Which region is inside the triangle and the circle but outside the square?

    1. Region 7
    2. Region 6
    3. Region 4
    4. Region 1
    Show answer

    Answer: C. T and C, not S is region 4. Region 7 is inside S as well.

  5. 5. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. Dots lie in regions 3, 5, 6, 6, 7. How many are inside the square but NOT inside the triangle?

    1. 2
    2. 3
    3. 5
    4. 4
    Show answer

    Answer: A. The square holds 3, 5, 6, 7. Remove the triangle's regions (6, 7), leaving 3 and 5. One dot each: 2.

  6. 6. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. Which list gives the regions inside the triangle?

    1. 1, 4, 6 and 7
    2. 1, 4 and 6
    3. 1, 2, 3 and 7
    4. 2, 4, 5 and 7
    Show answer

    Answer: A. The triangle holds its own region 1, the regions shared with C (4) and with S (6), and the middle region 7. The list 2, 4, 5, 7 is the circle's.

  7. 7. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. Which regions are 'in the circle or the square but not the triangle'?

    1. 2 and 3 only
    2. 2, 3, 5 and 7
    3. 2, 3 and 5
    4. 5 only
    Show answer

    Answer: C. Inside C or S: 2, 3, 4, 5, 6, 7. Remove the triangle's regions (4, 6, 7). Left: 2, 3 and 5.

  8. 8. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. Which regions are 'in at least one figure but not in all three'?

    1. 1, 2 and 3
    2. 1 to 6
    3. 4, 5 and 6
    4. 1 to 7
    Show answer

    Answer: B. At least one figure is regions 1 to 7; 'not in all three' removes region 7. That leaves regions 1 to 6.

  9. 9. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. A dot is 'in the circle and the square'. Without the word 'only', which regions could it be in?

    1. 5 only
    2. 7 only
    3. 2 or 3
    4. 5 or 7
    Show answer

    Answer: D. C and S without 'only' allows the dot to be in T or not: region 5 (not T) or region 7 (T too).

  10. 10. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. What is the fewest number of dots so that there is at least one dot in each of: the triangle and circle; the circle and square; the triangle and square; and the circle only?

    1. 1
    2. 2
    3. 4
    4. 3
    Show answer

    Answer: B. The first three conditions are all met by one dot in region 7. 'Circle only' is region 2, which region 7 cannot cover. So 2 dots: one in region 7 and one in region 2.

  11. 11. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. What is the fewest number of dots so that there is at least one in the triangle and circle only, one in the circle and square only, and one in the triangle and square only?

    1. 3
    2. 1
    3. 2
    4. 4
    Show answer

    Answer: A. 'Only' removes the middle region, so the conditions need regions 4, 5 and 6, which are three different regions. A region-7 dot fails all three because it is also in the third figure.

  12. 12. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. Dots are in regions 1, 2, 4, 4, 5, 7, 7. How many dots are in exactly two figures?

    1. 5
    2. 2
    3. 7
    4. 3
    Show answer

    Answer: D. Exactly two figures means regions 4, 5, 6. Region 4 has 2 dots, region 5 has 1, region 6 none: 3. The region-7 dots are in three figures.

  13. 13. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. Dots are in regions 1, 3, 4, 6, 6, 7. How many are in the triangle but not the circle?

    1. 4
    2. 2
    3. 3
    4. 5
    Show answer

    Answer: C. The triangle holds 1, 4, 6, 7; remove the circle's regions (4, 7), leaving 1 and 6. Region 1 has 1 dot, region 6 has 2: total 3.

  14. 14. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. A student reads 'in the circle but not the triangle' as 'in the circle only' and answers region 2. Which region has the student wrongly left out?

    1. Region 4
    2. Region 5
    3. Region 7
    4. Region 3
    Show answer

    Answer: B. 'In C but not T' allows the square: C holds 2, 4, 5, 7; removing T's regions (4, 7) leaves 2 and 5. Reading 'but not' as 'only' drops region 5.

  15. 15. Use the course's numbering: T = triangle, C = circle, S = square; region 1 = T only, 2 = C only, 3 = S only, 4 = T and C (not S), 5 = C and S (not T), 6 = T and S (not C), 7 = all three. Dots are in regions 2, 4, 5, 6, 7. How many dots are in the circle, and how many in exactly one figure?

    1. 3 in the circle, 1 in exactly one figure
    2. 4 in the circle, 2 in exactly one figure
    3. 5 in the circle, 1 in exactly one figure
    4. 4 in the circle, 1 in exactly one figure
    Show answer

    Answer: D. The circle holds 2, 4, 5, 7: 4 dots (the region 6 dot is outside C). Exactly one figure means regions 1, 2, 3: only region 2 has a dot, so 1.

Questions 1-3: lesson 1 (two overlapping figures). Questions 4-6: lesson 2 (three figures and seven regions). Questions 7-9: lesson 3 (translating a description). Questions 10-12: lesson 4 (counting and fewest dots). Questions 13-15: lesson 5 (mixed practice and traps). Revisit a lesson for the questions you missed.

Privacy · Terms · Refunds · Delivery