• Practice
  • About 13 min
  • 5 practice questions

Speed checks and last-minute traps in figure completion

Use a fixed order of quick checks - count, outline, rule, final line check - and learn the five slips that turn a correct method into a wrong answer.

If something looks wrong, please tell us.

Under exam pressure, correct methods fail through small slips. The cure is a fixed order of checks, each very quick, that removes options one layer at a time. In this lesson you meet the order, see it on three examples, and learn the five most common traps with the one-line fix for each.

The order of checks

  1. Count the cells of the gap. Strike out every option with a different count.
  2. Read the outline of the gap: its bounding box and row counts. Strike out options with a different box.
  3. Apply the rule of the figure (symmetry, repeat, count, parity) to find what the piece must be.
  4. Verify. Put the answer in and check every row and column that it touches.

Each step removes options without needing the next, so you may finish early. If only one option survives step 1 or step 2, you can still use step 4 to guard against a careless count.

Worked examples

Example 1: size first. The gap has 6 cells and the options have 5, 6, 6 and 7 cells. Step 1 removes the 5-cell and the 7-cell options. Two options remain, both with 6 cells. Step 2: the gap is 2 rows by 3 columns, and one remaining option is 3 rows by 2 columns. Strike it out, because the piece may not be turned. One option remains.

Example 2: half-reading the symmetry. A figure is symmetric about the vertical middle line, and the left half of one row reads # # . (3 cells). A student writes the full row as # # . # # . , which copies the left half instead of reversing it. The correct full row is # # . . # # . Check: read the row from the right and it must read the same as from the left. # # . . # # reversed is # # . . # # , so it passes. The student's row reversed is . # # . # # , which fails.

Example 3: the final check. Every row and every column of a 4 by 4 figure must hold exactly two shaded cells. The visible rows are # # . . , # . . # , . # ? ? and . . ? ? , and the piece fills the bottom-right 2 by 2 block. The options are (A) # # / . # , (B) # . / # # , (C) . # / # # and (D) # . / . # . Check each: (A) gives row 3 the cells . # # # , three shaded cells, so it fails. (C) gives column 3 only one shaded cell. (D) leaves row 4 with only one shaded cell. (B) gives row 3 as . # # . and row 4 as . . # # , and columns 3 and 4 each hold two shaded cells. Answer: (B).

Count, outline, rule, verify. Every option must survive all four checks.

— Rule to remember

Five traps and their fixes

Traps
TrapFix
Choosing an option with the right outline but the wrong cell countCount first, always
Accepting a turned or flipped pieceCompare the exact position of the odd cell
Copying a symmetric half instead of reversing itRead the finished row backwards
Starting a repeat count from 0Places are numbered from 1; remainder 0 is the last cell
Checking only rows after a counting ruleCheck every column too

Key takeaways. A fixed order of checks protects you from slips. If your verified answer contradicts the figure, the fault is in your reading, not in the rule.

Check your understanding

  1. 1. A gap has 5 cells. The options have 4, 5, 5 and 6 cells. How many options survive the count check?

    1. 1
    2. 2
    3. 3
    4. 4
    Show answer

    Answer: B. Only the two options with 5 cells survive.

  2. 2. A figure is symmetric about the vertical middle line. The left half of a row reads . # # . What is the full row?

    1. . # # # # .
    2. . # # . # # .
    3. . # # . . # #
    4. # # . . # # .
    Show answer

    Answer: A. Reverse the left half to get # # . and join: . # # # # .

  3. 3. In which order should the quick checks be made?

    1. Rule, count, verify, outline
    2. Count, outline, rule, verify
    3. Verify, count, rule, outline
    4. Outline, verify, rule, count
    Show answer

    Answer: B. Counting is quickest and removes the most options, then the outline, then the rule, and the final verification last.

  4. 4. A repeating row has unit length 4. Which place holds the last cell of the unit?

    1. Place 10
    2. Place 13
    3. Place 12
    4. Place 14
    Show answer

    Answer: C. The last cell of a unit of length 4 sits at places 4, 8, 12 and so on, the multiples of 4. Place 12 gives remainder 0.

  5. 5. Every row and every column of a figure must hold two shaded cells. A student checks the rows only. What can go wrong?

    1. The rows will be counted twice
    2. The figure will become too large
    3. The piece will have to be turned
    4. A column can still break the rule
    Show answer

    Answer: D. A piece can give every row the right count and still leave a column with too many or too few shaded cells.

Privacy · Terms · Refunds · Delivery