Revision notes

Paper Cutting: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Cutting folded paper: the basic idea

Cut position and result
Where the cut is madeWhat you see on opening
Away from every creaseSeparate copies, one per layer
Touching a creaseCopies join at the crease into one larger shape
Touching a crease on both sides (a strip across)Pieces may separate; the sheet may come apart

A cut repeats on every layer. Copies far from a crease stay separate; copies touching a crease join into one shape.

— Rule to remember

Key takeaways: count the layers; look at whether the cut touches a crease; remember the copies are mirror images.

Read the full lesson

Lesson 2

Cuts on the fold: making whole shapes from halves

Cut on the crease (one fold)
Shape cut, with one side on the creaseShape on opening
Half-circle (diameter on the crease)Full circle
Rectangle (one long side on the crease)A larger rectangle, twice as wide
Right-angled triangle (a short side on the crease)A larger triangle: two right triangles joined along a short side make an isosceles triangle
Isosceles triangle, base on the creaseRhombus (a diamond), or a kite if it is not isosceles

A cut with a side on the crease shows its whole shape when opened: semicircle gives circle, triangle gives diamond, rectangle gives a doubled rectangle.

— Rule to remember

Key takeaways: a side on the crease makes a whole shape; only a point on the crease makes two shapes touching at a point.

Read the full lesson

Lesson 3

Two folds and the centre of the sheet

Cuts on a twice-folded sheet
CutResult on opening
Small shape away from both creases4 separate copies, one in each quarter
Shape touching one crease along a side2 joined shapes (each pair joined), 2 pieces in all
Square whose corner is the centre corner, with sides on both creasesOne larger square at the centre
Right-angled triangle with the right angle at the centre corner, legs on both creasesA square turned by 45 degrees (a diamond) at the centre
Quarter-circle with the centre of the arc at the centre cornerA full circle at the centre

The corner where both creases meet is the centre of the sheet: four copies of a cut there join into one shape around the centre.

— Rule to remember

Key takeaways: the centre corner joins four copies; shapes along only one crease join in pairs; shapes away from creases stay separate.

Read the full lesson

Lesson 4

Diagonal folds and counting pieces

A cut that runs edge to edge parallel to the crease makes 3 pieces on a once-folded sheet.

— Rule to remember

Key takeaways: a diagonal crease reflects diagonally; a cut right across makes extra pieces; a cut ending on a crease continues as its mirror copy.

Read the full lesson

Lesson 5

Paper cutting: mixed problems and exam method

Layers give copies; contact with a crease joins them; the opened sheet is symmetric about every crease.

— Rule to remember

Key takeaways: count layers, check contact with creases, and test the answer by symmetry.

Read the full lesson

Lesson 6

Notches and corners on a once-folded sheet

Cuts at the edges of the packet
Where the cut is madeWhat the opened sheet shows
A triangle on the right edgeOne notch on the right edge and one on the left edge, at the same height
The top-right corner cut offBoth top corners cut off
A notch in the top edge, away from the creaseTwo notches in the top edge, the same distance either side of the middle
A triangle at the top end of the crease, one side on the crease and one side on the top edgeOne notch in the middle of the top edge, twice as wide as the cut

A cut at a free edge appears twice, once on each side of the crease. A cut touching the crease joins its twin and appears once, twice as wide.

  • Tell the crease from the free edges before you look at the cut.
  • A notch or corner at a free edge has a twin on the opposite side of the crease.
  • A cut that touches the crease joins its twin into one larger notch.
Read the full lesson

Lesson 7

Using symmetry to check the opened sheet

Folds and the symmetry of the opened sheet
How the sheet was foldedLines of symmetry of the pattern
Once, in halfOne: the crease
Twice, in half and in half again (at right angles)Two: both creases
Once along a diagonalOne: the diagonal
Along a diagonal, then in half againTwo: both diagonals

The opened sheet is symmetrical about every crease. A cut-out off the crease has a twin of the same shape on the other side; a cut-out on the crease is its own twin.

  • Find the creases from the folds; the opened pattern is symmetrical about each of them.
  • A cut-out off the crease always has a twin of the same shape and size, so such cut-outs come in pairs.
  • Use symmetry to cross out options before you work out any details.
Read the full lesson

Lesson 8

Counting cut-outs when there is more than one cut

Number of cut-outs from one cut
Sheet foldedCut is away from every creaseCut touches one creaseCut touches both creases (centre corner)
Once, in half21Not applicable
Twice, at right angles421
Cuts at the corners of a twice-folded packet
Corner of the packetCut-outs on the opened sheet
The centre corner1 shape, at the centre
The real corner (opposite the centre)4: all four corners of the sheet
Either of the other two corners2: notches in the middle of two opposite edges

Count each cut separately, then add. Clear of every crease: 2 on a once-folded sheet, 4 on a twice-folded sheet. On a crease, halve the number. At the centre corner of a twice-folded sheet, 1.

  • Sort each cut by the creases it touches.
  • Add the counts for all the cuts.
  • Count notches on the edges in the same way as holes in the middle.
Read the full lesson

Lesson 9

From the opened pattern back to the cut

Find the lines of symmetry, take one repeating part, and read the cut from that part. A shape touching a line of symmetry was cut on the crease.

  • The lines of symmetry of the pattern are the creases.
  • One line means a half is repeated; two lines mean a quarter is repeated.
  • A shape that touches a line of symmetry was cut on a crease, and the cut is only half or a quarter of it.
Read the full lesson

Privacy · Terms · Refunds · Delivery