• Foundation
  • About 11 min
  • 5 practice questions

Diagonal folds and counting pieces

Predict cut-outs on diagonally folded paper, and count how many pieces a cut-through leaves.

If something looks wrong, please tell us.

Folding a square corner to corner gives a triangle with two layers. A cut here follows the same rule: two copies, mirrored across the diagonal. This lesson also looks at a different kind of question: how many pieces does the sheet fall into after a cut that runs right across it?

Diagonal crease

With the crease along a diagonal, a cut away from the crease gives two copies on opposite sides of the diagonal. A cut shape with a side on the diagonal joins its copy: an isosceles triangle with its base on the diagonal gives a rhombus with the diagonal as one of its diagonals; a half-circle with its diameter on the crease gives a full circle centred on the crease.

Counting pieces

If a cut runs from one edge of the folded paper to another, it can split the sheet into several pieces. Take a sheet folded in half along a vertical crease. Cut a straight strip parallel to the crease, from the top edge to the bottom edge, at some distance from the crease. On opening, the cut appears twice, once on each side of the crease. The sheet falls into three pieces: a left strip, a right strip and a middle piece, which holds the crease and stays in one piece.

Counting the pieces: every cut that runs completely from edge to edge separates the paper along its length. Two such cut lines (the cut and its copy) make 3 pieces.

Worked examples

Example 1. A sheet is folded along a diagonal and an isosceles triangle is cut with its base on the diagonal. What is the shape of the hole? Working: the triangle and its mirror image share a base. Answer: a rhombus.

Example 2. A sheet is folded in half vertically, and a straight cut is made from the top edge to the bottom edge, parallel to the crease, 2 cm from it. How many pieces on opening? Working: two cut lines, one on each side of the crease, 2 cm away from it. They split the sheet into a left strip, a middle piece 4 cm wide, and a right strip. Answer: 3 pieces.

Example 3. A small circle is cut near the middle of a diagonally folded sheet, away from the crease. How many holes? Working: two layers. Answer: 2 holes, placed symmetrically about the diagonal.

A cut that runs edge to edge parallel to the crease makes 3 pieces on a once-folded sheet.

— Rule to remember

Key takeaways: a diagonal crease reflects diagonally; a cut right across makes extra pieces; a cut ending on a crease continues as its mirror copy.

Check your understanding

  1. 1. A square sheet is folded along a diagonal and an isosceles triangle is cut with its base on the diagonal. What shape is the hole?

    1. A triangle
    2. A rectangle
    3. A rhombus
    4. Two separate triangles
    Show answer

    Answer: C. The triangle and its mirror image share the base on the diagonal crease, making a four-sided figure with equal sides: a rhombus.

  2. 2. A sheet is folded in half along a vertical crease. A straight cut is made from the top edge to the bottom edge, parallel to the crease and 2 cm from it. How many pieces does the opened sheet fall into?

    1. 3
    2. 2
    3. 4
    4. 1
    Show answer

    Answer: A. The cut appears twice, 2 cm either side of the crease. Two edge-to-edge cut lines split the sheet into a left strip, a middle piece and a right strip.

  3. 3. A square sheet is folded along a diagonal and a small square is cut away from the diagonal. What do you see on opening?

    1. 1 square
    2. 4 squares
    3. 2 squares touching at a corner
    4. 2 squares, placed symmetrically about the diagonal
    Show answer

    Answer: D. The diagonal fold makes 2 layers, so the cut is repeated twice, mirrored across the diagonal. It does not touch the crease, so the copies stay separate.

  4. 4. A once-folded sheet has a straight cut made from the open edge towards the crease, at right angles to it, stopping 1 cm short of the crease. How many pieces does the opened sheet have?

    1. 2 pieces
    2. 1 piece, with an uncut gap of 2 cm across the crease
    3. 3 pieces
    4. 4 pieces
    Show answer

    Answer: B. The cut and its copy line up in one slit, but each stops 1 cm from the crease, leaving 1 + 1 = 2 cm uncut, so the sheet stays in one piece.

  5. 5. A sheet is folded in half along a vertical crease and a cut is made from top to bottom, parallel to the crease and 3 cm from it. How wide is the middle piece on opening?

    1. 3 cm
    2. 6 cm
    3. 1.5 cm
    4. 9 cm
    Show answer

    Answer: B. The two cut lines are 3 cm either side of the crease, so the middle piece is 3 + 3 = 6 cm wide, with the crease down its centre.

Privacy · Terms · Refunds · Delivery