- Foundation
- About 12 min
- 5 practice questions
Notches and corners on a once-folded sheet
Predict what happens to the edges of the sheet when a corner or a small triangle is cut from the open edges of a sheet folded in half, and why the crease edge behaves differently.
If something looks wrong, please tell us.
Not every cut makes a hole in the middle. When a cut is made at the edge of the folded paper, it makes a notch in the edge of the opened sheet, or it cuts off a corner. This lesson looks at these cuts on a sheet that has been folded in half only once.
Free edges and the crease
Fold a square sheet in half, so that the left half lies on the right half. The folded packet has four edges. The edge on the left is the crease. It is not an edge of the sheet at all, only the line where the paper was bent. The other three edges, on the top, the bottom and the right, are free edges, which are edges of the real sheet. A cut at a free edge makes a notch in the edge of the opened sheet. A cut at the crease joins up with its mirror image.
The opened sheet is symmetrical about the crease, so a notch on the right edge has a twin on the left edge, at the same height. A notch in the top edge has a twin on the top edge, on the other side of the middle line, at the same distance from the middle.
| Where the cut is made | What the opened sheet shows |
|---|---|
| A triangle on the right edge | One notch on the right edge and one on the left edge, at the same height |
| The top-right corner cut off | Both top corners cut off |
| A notch in the top edge, away from the crease | Two notches in the top edge, the same distance either side of the middle |
| A triangle at the top end of the crease, one side on the crease and one side on the top edge | One notch in the middle of the top edge, twice as wide as the cut |
Worked examples
Example 1. A sheet is folded in half, and a small triangle is cut from the middle of the right-hand edge of the packet. What does the opened sheet look like? Working: the right edge of the packet is the right edge of the sheet. The twin is on the left edge, at the same height. Answer: a triangular notch in the middle of both the left and the right edge.
Example 2. A small triangle is cut off the top-right corner of the packet. Working: this corner of the packet is the top-right corner of the sheet. Its twin is the top-left corner. Answer: both top corners of the opened sheet are cut off, so the sheet has six corners.
Example 3. A square sheet 8 cm wide is folded in half. A small notch is cut in the top edge of the packet, 2 cm away from the crease. Where are the notches on the opened sheet? Working: the middle line of the sheet is the crease, 4 cm from the left edge. The notch is 2 cm from the crease on the right, so it is 6 cm from the left edge. Its twin is 2 cm from the crease on the left, so it is 2 cm from the left edge. Answer: two notches in the top edge, 2 cm and 6 cm from the left.
Example 4. A triangle is cut at the top end of the crease. Its base of 2 cm lies along the top edge, starting at the crease, and its short side of 2 cm lies along the crease. What does the opened sheet show? Working: the cut touches the crease along a side, so it joins its twin. The base doubles to 4 cm, and the crease side is shared. Answer: a single triangular notch, 4 cm wide, in the middle of the top edge, 2 cm deep.
A cut at a free edge appears twice, once on each side of the crease. A cut touching the crease joins its twin and appears once, twice as wide.
Key takeaways
- Tell the crease from the free edges before you look at the cut.
- A notch or corner at a free edge has a twin on the opposite side of the crease.
- A cut that touches the crease joins its twin into one larger notch.
Check your understanding
-
1. A sheet is folded in half and a small triangle is cut from the middle of the right-hand free edge. How many notches does the opened sheet have?
- 1
- 2
- 3
- 4
Show answer
Answer: B. The notch has a twin across the crease, on the left edge. So there are 2 notches.
-
2. A sheet is folded in half and the top-right corner of the packet is cut off. What does the opened sheet look like?
- Both top corners are cut off
- Only the top-right corner is cut off
- All four corners are cut off
- A hole in the middle
Show answer
Answer: A. The corner of the packet is a real corner of the sheet, and its twin across the crease is the top-left corner.
-
3. A square sheet 8 cm wide is folded in half. A notch is cut in the top edge, 1 cm from the crease. How far from the left edge are the two notches?
- 1 cm and 7 cm
- 3 cm and 4 cm
- 3 cm and 5 cm
- 4 cm and 5 cm
Show answer
Answer: C. The crease is 4 cm from the left edge. One notch is 1 cm to the right of it, at 5 cm. Its twin is 1 cm to the left, at 3 cm.
-
4. A triangle with a 2 cm side on the crease and a 3 cm base on the top edge is cut at the top end of the crease. How wide is the notch in the opened sheet?
- 3 cm
- 2 cm
- 5 cm
- 6 cm
Show answer
Answer: D. The cut touches the crease, so it joins its twin. The base of 3 cm doubles to 6 cm, in the middle of the top edge.
-
5. Which edge of the folded packet is not an edge of the real sheet?
- The crease edge
- The top edge
- The bottom edge
- The right edge
Show answer
Answer: A. The crease is only the line where the paper was bent. The other three edges of the packet are free edges of the sheet.
Sign in to keep track of the lessons you finish.