• Practice
  • About 13 min
  • 5 practice questions

Diagonal folds in paper cutting

Predict cut-outs after a diagonal fold, where a point (x, y) is reflected to (y, x), including the square formed at the centre.

If something looks wrong, please tell us.

A diagonal fold turns the square into a right-angled triangle. The crease is the longest side of that triangle. Cuts reflect across it just as they did across a vertical crease.

Setting

The 8 by 8 sheet is folded along the diagonal y = x from (0, 0) to (8, 8), the top-left half going over the lower-right half. The packet is the triangle with corners (0, 0), (8, 0) and (8, 8). The corner (8, 0), the right angle, is an original corner. The long side y = x is the crease; the other two sides are free edges. A point (x, y) is reflected to (y, x).

Worked examples

Example 1. A small triangle is cut off the right-angled corner (8, 0). Its reflection is at (0, 8). The opened sheet has two opposite corners trimmed.

Example 2. A right-angled isosceles triangle with corners (3, 3), (5, 5) and (5, 3) has its longest side (the hypotenuse) on the crease. Its reflection has corners (3, 3), (5, 5) and (3, 5). Together they make a square with corners (3, 3), (5, 3), (5, 5), (3, 5), centred at (4, 4), with sides parallel to the sheet's edges.

Example 3. A small notch is cut in the free edge x = 8 at y = 4. Its reflection is at (4, 8). The opened sheet has a notch in the right edge and a notch in the top edge.

Example 4. A semicircle is cut with its diameter on the crease, centred at (2, 2). Its reflection completes it: a full circle centred at (2, 2).

Example 5. A small circle is cut at (6, 2), clear of the crease. It appears again at (2, 6), so there are two circles.

Along the diagonal y = x, (x, y) goes to (y, x). Cuts on the crease merge, cuts clear of it double.

— Rule to remember

Key takeaways

  • The diagonal crease swaps the two coordinates.
  • The right-angled corner stands for two opposite corners.
  • A cut with its long side on the crease forms a larger symmetrical shape.

Check your understanding

  1. 1. An 8 by 8 sheet is folded along the diagonal y = x, so the packet is the triangle (0, 0), (8, 0), (8, 8). A small triangle is cut off the right-angled corner (8, 0). What does the opened sheet show?

    1. Two neighbouring corners trimmed
    2. One corner trimmed
    3. All four corners trimmed
    4. Two opposite corners trimmed, (8, 0) and (0, 8)
    Show answer

    Answer: D. The diagonal crease swaps coordinates: (8, 0) goes to (0, 8), the opposite corner.

  2. 2. An 8 by 8 sheet is folded along the diagonal y = x, so the packet is the triangle (0, 0), (8, 0), (8, 8). A triangle with corners (3, 3), (5, 5) and (5, 3) is cut, with its hypotenuse on the crease. What does the opened sheet show?

    1. A diamond tilted at 45 degrees
    2. A square with corners (3, 3), (5, 3), (5, 5), (3, 5)
    3. A larger triangle
    4. Two separate triangles
    Show answer

    Answer: B. Swapping coordinates sends (5, 3) to (3, 5). The triangle and its image share the hypotenuse and form a square with sides parallel to the sheet's edges.

  3. 3. An 8 by 8 sheet is folded along the diagonal y = x, so the packet is the triangle (0, 0), (8, 0), (8, 8). A small circle is cut at (7, 1), clear of the crease. Where are the circles on the opened sheet?

    1. (7, 1) and (1, 1)
    2. (7, 1) and (1, 7)
    3. (7, 1) and (7, 7)
    4. (7, 1) only
    Show answer

    Answer: B. Reflection in y = x swaps the coordinates: (7, 1) goes to (1, 7).

  4. 4. An 8 by 8 sheet is folded along the diagonal y = x, so the packet is the triangle (0, 0), (8, 0), (8, 8). A notch is cut in the free edge x = 8 at y = 4. Where is the second notch?

    1. (0, 4), in the left edge
    2. (8, 4) again, on the same edge
    3. (4, 0), in the bottom edge
    4. (4, 8), in the top edge
    Show answer

    Answer: D. Swap the coordinates: (8, 4) goes to (4, 8), which lies on the top edge y = 8.

  5. 5. An 8 by 8 sheet is folded along the diagonal y = x, so the packet is the triangle (0, 0), (8, 0), (8, 8). A semicircle is cut with its diameter on the crease, centred at (2, 2). What appears on opening?

    1. A full circle centred at (2, 2)
    2. A semicircle
    3. Two semicircles at (2, 2) and (6, 6)
    4. Two full circles
    Show answer

    Answer: A. The diameter lies on the crease, so the semicircle and its reflection join into one full circle with the same centre, (2, 2).

Sign in to keep track of the lessons you finish.

Next lesson → Mixed paper cutting practice and traps

Privacy · Terms · Refunds · Delivery