• Practice
  • About 14 min
  • 5 practice questions

Mixed cutting practice: a routine and the traps

Run a fixed five-step routine on mixed problems with different folds, including a fold-back and a diagonal fold, and see where students lose marks.

If something looks wrong, please tell us.

In the exam the questions are mixed, and you cannot rely on the type. A fixed routine protects you from slips. This lesson states the routine and then applies it to four problems of different kinds.

The routine

  1. List the folds in order and write down the packet.
  2. Mark each edge of the packet as a crease or a free edge.
  3. Say where the cut is: clear of the creases, on one crease, at a corner.
  4. Unfold in reverse order, reflecting in each crease.
  5. Merge copies that touch, then count and describe the cut-outs.

Worked examples

Example 1. The sheet is folded right over left and then top over bottom. A small square, 1 by 1, is cut at the top-right corner of the packet, with its sides along the two creases. Working: the creases of the packet are its right and top edges, so the top-right corner is the centre of the sheet. The four copies of the square meet at the centre. Answer: one square, 2 by 2, in the middle of the sheet.

Example 2. The sheet is folded left over right at x = 4, and then the right-hand strip of the packet, x from 6 to 8, is folded back over to the left, with the crease at x = 6. The packet is x from 4 to 6. A small square is cut at x from 4 to 5. Working: a point x in the packet comes from four places on the sheet: x, 8 - x, 12 - x and x - 4. For x from 4 to 5 these are x from 4 to 5, from 3 to 4, from 7 to 8 and from 0 to 1. The first two join along x = 4. Answer: three cut-outs: a notch at the left edge, a hole 2 wide from x = 3 to 5, and a notch at the right edge.

Example 3. The sheet is folded twice (creases x = 4 and y = 4), packet x from 4 to 8 and y from 4 to 8. A square 1 by 1 is cut at x from 5 to 6 and y from 4 to 5, so one side lies on the crease y = 4. How many cut-outs, and what are they? Working: the square joins its copy across y = 4, giving a piece 1 wide and 2 tall, from y = 3 to 5. The reflection in x = 4 puts a second piece at x from 2 to 3. Answer: two cut-outs, each 1 wide and 2 tall.

Example 4. The sheet is folded along its diagonal from (0, 0) to (8, 8), and the packet is the half below the diagonal. A square 1 by 1 is cut at x from 5 to 6 and y from 4 to 5. Working: the corner (5, 5) of the square lies on the diagonal crease. The mirror image of the square is at x from 4 to 5 and y from 5 to 6, because a diagonal fold swaps x and y. Answer: two squares that touch at a single point, (5, 5).

Where marks are lost

Common traps
TrapWhat to do
Unfolding the first fold firstAlways undo the last fold first.
Counting layers as 2 or 4 everywhereCount at the exact place of the cut when folds are uneven.
Counting a merged shape as separate cut-outsJoin copies that touch along a side; those that touch at one point stay two shapes.
Treating a fold-back as an ordinary foldWrite the formula for each layer before you cut.

List the folds, mark creases and free edges, place the cut, unfold in reverse, then merge and count.

Key takeaways

  • Apply the five steps in order to every problem.
  • A diagonal fold swaps x and y; a middle fold sends x to 8 - x.
  • Copies that share a side merge; copies that share only a point do not.

Check your understanding

  1. 1. The sheet is folded right over left and top over bottom. A 1 by 1 square is cut at the packet's top-right corner, with two sides on the creases. What does the opened sheet show?

    1. Four 1 by 1 squares
    2. A 2 by 2 square in the middle
    3. A 1 by 1 square in the middle
    4. Two rectangles
    Show answer

    Answer: B. The top-right corner of this packet is the centre of the sheet, so the four copies join into a 2 by 2 square.

  2. 2. In the fold-back packet above (x from 4 to 6), the places on the sheet that make up a point x are x, 8 - x, 12 - x and which other?

    1. 4 - x
    2. x + 4
    3. x - 4
    4. x - 8
    Show answer

    Answer: C. The left-hand flap of the first fold also lies over the packet, and its points are at x - 4 on the open sheet.

  3. 3. A twice-folded packet has a 1 by 1 square with one side on a crease. How many cut-outs appear, and how big is each?

    1. 2, each 1 by 2
    2. 4, each 1 by 1
    3. 1, which is 2 by 2
    4. 2, each 1 by 1
    Show answer

    Answer: A. The square joins its copy across the crease, making a 1 by 2 piece, and the other fold doubles this into two such pieces.

  4. 4. After a diagonal fold from (0, 0) to (8, 8), a square at x from 5 to 6 and y from 4 to 5 is cut. Where is the mirror square?

    1. At x from 5 to 6 and y from 3 to 4
    2. At x from 3 to 4 and y from 4 to 5
    3. At x from 2 to 3 and y from 4 to 5
    4. At x from 4 to 5 and y from 5 to 6
    Show answer

    Answer: D. A diagonal fold along y = x swaps the coordinates, so (x, y) goes to (y, x).

  5. 5. Which step of the routine should come immediately before counting the cut-outs?

    1. Drawing the packet again
    2. Choosing the shape of the cut
    3. Merging copies that touch
    4. Adding up the layers
    Show answer

    Answer: C. Counting before merging gives the wrong number, because copies that share a side form one cut-out.

Privacy · Terms · Refunds · Delivery