Revision notes

Paper Cutting: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Cutting on one fold: shapes that join along the crease

A cut touching the crease joins its mirror image into one larger shape. A cut away from the crease appears twice.

— Rule to remember
  • Cuts are reflected across the crease on opening.
  • A cut touching the crease merges into one bigger shape.
  • A cut clear of the crease gives two shapes.
Read the full lesson

Lesson 2

Two folds: the centre, the creases and the free edges

Place in the packetWhat it is on the open sheet
Corner (4, 4)The centre of the sheet, where all four layers meet
Edge x = 4Crease of fold 1, a vertical line through the sheet
Edge y = 4Crease of fold 2, a horizontal line through the sheet
Corner (8, 8)An original corner of the sheet
Edges x = 8 and y = 8Original outer edges of the sheet

Cut at the centre corner: one shape at the centre. Cut at the outer corner: four corners trimmed. Cut on a crease edge: shapes complete themselves along that line.

— Rule to remember
  • Know the four kinds of places in the packet: centre, crease edges, outer corner, free edges.
  • Undo the last fold first.
  • Cuts at the centre or on crease edges merge into one shape.
Read the full lesson

Lesson 3

One fold: edges, corners and counting cut-outs

Count cut-outs after unfolding: shapes clear of every crease double, shapes on a crease merge with their own image.

— Rule to remember
  • Notches in free edges and corners are reflected across the crease.
  • A cut at the end of the crease becomes one centred notch.
  • Count cut-outs after unfolding.
Read the full lesson

Lesson 4

Diagonal folds in paper cutting

Along the diagonal y = x, (x, y) goes to (y, x). Cuts on the crease merge, cuts clear of it double.

— Rule to remember
  • The diagonal crease swaps the two coordinates.
  • The right-angled corner stands for two opposite corners.
  • A cut with its long side on the crease forms a larger symmetrical shape.
Read the full lesson

Lesson 5

Mixed paper cutting practice and traps

Where is the cut: clear of the creases, on a crease or at a corner? That decides how many shapes you get and what they look like.

— Rule to remember
  • Classify the place of the cut first.
  • Unfold in reverse order and merge shapes that touch a crease.
  • Count cut-outs only after merging.
Read the full lesson

Lesson 6

Fold direction drill: which edges of the packet are creases

Single folds of the 8 by 8 sheet
FoldPacket occupiesCrease is the packet's
Left over rightx from 4 to 8left edge
Right over leftx from 0 to 4right edge
Bottom over topy from 4 to 8bottom edge
Top over bottomy from 0 to 4top edge
Four ways to fold twice
FoldsPacketCrease edges of the packetCentre cornerReal corner
Left over right, then bottom over topx 4-8, y 4-8left and bottombottom-lefttop-right
Left over right, then top over bottomx 4-8, y 0-4left and toptop-leftbottom-right
Right over left, then bottom over topx 0-4, y 4-8right and bottombottom-righttop-left
Right over left, then top over bottomx 0-4, y 0-4right and toptop-rightbottom-left

The crease is on the side the paper was folded towards. The corner where the two crease edges meet is the centre of the sheet; the opposite corner is a real corner.

  • Write the packet's position first, then mark its crease edges.
  • The centre corner is where the creases meet; the real corner is opposite.
  • Reflect in the middle lines x = 4 and y = 4 to place the holes.
Read the full lesson

Lesson 7

Naming the opened shape: from a half-shape to a whole shape

Half-shapes and their whole shapes
Cut in the packetOpened shape
Rectangle with a long side on the creaseA longer rectangle, twice as wide
Right triangle with one leg on the creaseAn isosceles triangle
Equilateral triangle with a side on the creaseA rhombus
Isosceles trapezium with its long parallel side on the creaseA hexagon
Triangle with only one corner on the creaseTwo triangles meeting at a point
Right triangle with its hypotenuse on the creaseA kite (or a square, if the triangle is isosceles)

Reflect each corner: (x, y) goes to (8 - x, y). Corners on the crease stay. Join the corners and name the shape from its sides.

  • A side on the crease is shared, so the whole shape is formed by joining the half-shape to its mirror image.
  • A corner on the crease that is the only contact gives two shapes meeting at a point.
  • Name the result from equal sides and parallel sides.
Read the full lesson

Lesson 8

Uneven folds: when different parts of the packet have different layers

Where the copies fall
FoldLayers at x from 3 to 6Copies of a cut at x
Left third over2x and 6 - x
Letter fold3x, 6 - x and 12 - x

Count the layers where the cut falls, using the exact place in the packet. Thick parts of the packet make more copies than thin parts.

  • With uneven folds, layers differ from place to place, so check each cut.
  • For a left-third fold, a cut at x in the thick part is copied at 6 - x.
  • In a letter fold, the three copies are at x, 6 - x and 12 - x.
Read the full lesson

Lesson 9

Mixed cutting practice: a routine and the traps

Common traps
TrapWhat to do
Unfolding the first fold firstAlways undo the last fold first.
Counting layers as 2 or 4 everywhereCount at the exact place of the cut when folds are uneven.
Counting a merged shape as separate cut-outsJoin copies that touch along a side; those that touch at one point stay two shapes.
Treating a fold-back as an ordinary foldWrite the formula for each layer before you cut.

List the folds, mark creases and free edges, place the cut, unfold in reverse, then merge and count.

  • Apply the five steps in order to every problem.
  • A diagonal fold swaps x and y; a middle fold sends x to 8 - x.
  • Copies that share a side merge; copies that share only a point do not.
Read the full lesson

Privacy · Terms · Refunds · Delivery