- Practice
- About 16 min
- 5 practice questions
Friction and inclined planes
Use static and kinetic friction, and resolve weight on an incline to find acceleration and the angle of repose.
If something looks wrong, please tell us.
Friction is the force that opposes relative motion between surfaces in contact. Exams combine it with inclines and pulleys, so it helps to know the rules cold.
Rules of friction
- Static friction adjusts to the applied force up to a maximum f_s(max) = μ_s N.
- Kinetic friction (once sliding) is f_k = μ_k N, and μ_k is usually less than μ_s.
- N is the normal force, not necessarily mg.
- Friction does not depend on the contact area, to a good approximation.
Inclined plane
For a block on a plane at angle θ: the weight component along the plane is mg sin θ and perpendicular to it is mg cos θ, so N = mg cos θ. Sliding down: a = g sin θ − μ g cos θ. The angle of repose is the angle at which sliding just begins; tan θ = μ_s.
Worked examples (g = 10 m/s²)
Example 1. A 10 kg block rests on a rough floor with μ = 0.3. It is pushed by 50 N. Friction = 0.3 × 100 = 30 N. Net force = 20 N, so a = 2 m/s².
Example 2. A 2 kg block with μ_s = 0.4 is pushed horizontally with 5 N. The maximum static friction is 0.4 × 20 = 8 N. Since 5 N is less than 8 N, the block does not move and the friction equals 5 N.
Example 3. On a smooth 30° incline, a = g sin 30° = 5 m/s². With μ = 0.1 the acceleration is 10 × 0.5 − 0.1 × 10 × 0.866 = 5 − 0.866 = 4.13 m/s².
Example 4. A block just begins to slide when the incline reaches 30°. Then μ_s = tan 30° = 1/√3 ≈ 0.58.
f_max = μN. On an incline, N = mg cos θ and a = g sin θ − μ g cos θ. Angle of repose: tan θ = μ.
Key takeaways
- Static friction is only as large as needed, up to μ_s N.
- On an incline, split weight into components along and perpendicular to the plane.
- Constant speed means net force is zero, so friction equals the pull.
Check your understanding
-
1. A 6 kg block on a table has μ_s = 0.5. What least horizontal force will just start it moving? (Take g = 10 m/s².)
- 30 N
- 60 N
- 3 N
- 12 N
Show answer
Answer: A. Maximum static friction = μ_s N = 0.5 × 60 = 30 N; a push just above this starts it moving.
-
2. A 4 kg block with μ_s = 0.5 is pushed horizontally with 12 N. What friction acts on it? (Take g = 10 m/s².)
- 20 N, and the block stays at rest
- 12 N, and the block stays at rest
- 20 N, and the block moves
- 8 N, and the block moves
Show answer
Answer: B. Maximum static friction = 0.5 × 40 = 20 N. The push (12 N) is smaller, so the block stays at rest and friction equals the push, 12 N.
-
3. A block slides down a smooth incline of 30°. What is its acceleration? (Take g = 10 m/s².)
- 10 m/s²
- 8.66 m/s²
- 2.5 m/s²
- 5 m/s²
Show answer
Answer: D. a = g sin θ = 10 × sin 30° = 10 × 0.5 = 5 m/s².
-
4. A block just begins to slide when the incline is raised to 45°. What is the coefficient of static friction?
- 1
- 0.5
- 0.71
- √2
Show answer
Answer: A. At the angle of repose, μ_s = tan θ = tan 45° = 1.
-
5. A 25 kg crate is pulled along a level floor at constant speed by a 75 N horizontal force. What is the coefficient of kinetic friction? (Take g = 10 m/s².)
- 3
- 0.03
- 0.3
- 0.25
Show answer
Answer: C. Constant speed means net force 0, so friction = 75 N. μ_k = 75 ÷ (25 × 10) = 0.3.
Sign in to keep track of the lessons you finish.