• Practice
  • About 14 min
  • 5 practice questions

Two-stage motion: kinematics with Newton's laws

Combine F = ma with the equations of motion for problems where a force acts for a time and is then removed, including braking, slopes and ropes.

If something looks wrong, please tell us.

Many problems have two phases: a force pushes a body for a while and is then removed, or a body slides and then stops. The method is to treat the stages one by one. In each stage find the acceleration from Newton's second law, then use v = u + at, s = ut + ½at² and v² = u² + 2as. The final speed of one stage is the initial speed of the next. Take g = 10 m/s².

Method

  1. Draw a free-body diagram for each stage and find the net force.
  2. Use F = ma to find the acceleration for that stage.
  3. Use the equations of motion with the correct initial speed.
  4. Carry the final speed of one stage into the next stage.

Worked example 1: braking on a rough road

A 1000 kg car skids to rest from 20 m/s on a road where the coefficient of friction is 0.5. The friction force is μmg, so the deceleration is a = μg = 0.5 × 10 = 5 m/s². Stopping distance s = v²/2a = 400/10 = 40 m. The time is t = v/a = 20/5 = 4 s. The mass cancels, so a heavy truck and a light car skid the same distance for the same μ and speed.

Worked example 2: a push that stops

A 5 kg block on a rough floor (μ = 0.2) is pushed with a force of 30 N for 3 s, and then the push ends. Stage 1: friction f = 0.2 × 5 × 10 = 10 N, net force = 30 − 10 = 20 N, a = 20/5 = 4 m/s². After 3 s: v = 4 × 3 = 12 m/s, and the distance s₁ = ½ × 4 × 9 = 18 m. Stage 2: only friction acts, so a = −μg = −2 m/s². Distance to stop = 144/(2 × 2) = 36 m, taking 12/2 = 6 s. Total distance = 18 + 36 = 54 m; total time = 3 + 6 = 9 s.

Worked example 3: sliding down a smooth slope

A block slides from rest down a smooth slope of length 10 m inclined at 30° to the horizontal. The acceleration along the slope is g sin 30° = 5 m/s². Time: s = ½at² gives 10 = 2.5 t², so t = 2 s. Speed at the bottom: v = at = 10 m/s (or v² = 2as = 100). It is the same speed that the block would gain falling vertically through the height 10 × sin 30° = 5 m: √(2 × 10 × 5) = 10 m/s ✓.

Worked example 4: a rope then free flight

A 2 kg load is pulled upward from rest by a rope with a tension of 30 N for 2 s, after which the rope is released. Stage 1: net force = 30 − 20 = 10 N upward, a = 5 m/s². After 2 s: v = 10 m/s and the height reached h₁ = ½ × 5 × 4 = 10 m. Stage 2: only gravity acts, a = −10 m/s². The load rises a further h₂ = v²/2g = 100/20 = 5 m. Maximum height = 15 m. It takes a further 10/10 = 1 s to reach the top.

Speed tricks and traps

  • The mass cancels in braking on a level road.
  • Carry the velocity over from stage 1 to stage 2, not the acceleration.
  • When the force is removed, the body does not stop at once; it keeps its velocity and then slows down.
  • On a slope the friction force uses the normal force N = mg cos θ, not mg.

Stage by stage: find a from F_net = ma, use the equations of motion, then pass the final velocity on to the next stage.

— Rule to remember

Key takeaways

  • Braking distance = v²/2μg on level ground.
  • Acceleration changes when forces change; velocity does not jump.
  • Check the answer by working total distance or energy.

Check your understanding

  1. 1. A car skids to rest from 10 m/s on a road with μ = 0.5 (g = 10 m/s²). The stopping distance is:

    1. 20 m
    2. 10 m
    3. 5 m
    4. 15 m
    Show answer

    Answer: B. a = 5 m/s². s = v²/2a = 100/10 = 10 m.

  2. 2. A smooth slope is inclined at 30° (g = 10 m/s²). A block released from rest on it has an acceleration of:

    1. 5 m/s²
    2. 10 m/s²
    3. 8.7 m/s²
    4. 2.5 m/s²
    Show answer

    Answer: A. a = g sin 30° = 10 × 0.5 = 5 m/s².

  3. 3. A 5 kg block is pushed on a rough floor with 30 N and friction is 10 N. The acceleration is:

    1. 8 m/s²
    2. 6 m/s²
    3. 2 m/s²
    4. 4 m/s²
    Show answer

    Answer: D. Net force = 30 − 10 = 20 N. a = 20/5 = 4 m/s².

  4. 4. A body moving at 12 m/s on a rough floor decelerates at 2 m/s² after the push stops. The distance it travels before it stops is:

    1. 72 m
    2. 24 m
    3. 6 m
    4. 36 m
    Show answer

    Answer: D. s = v²/2a = 144/4 = 36 m.

  5. 5. A load rising at 10 m/s has its rope released. The further height it rises under gravity (g = 10 m/s²) is:

    1. 5 m
    2. 10 m
    3. 20 m
    4. 2 m
    Show answer

    Answer: A. h = v²/2g = 100/20 = 5 m.

Privacy · Terms · Refunds · Delivery