- Practice
- About 15 min
- 5 practice questions
Photon counting, photocurrent and stopping-potential graphs
Find the number of photons from the power, the photocurrent from the efficiency, and the constants and thresholds from a graph of stopping potential against frequency.
If something looks wrong, please tell us.
The earlier practice lesson on the photoelectric effect covered energy and threshold. This lesson goes into the three further question types: counting photons from power, finding the current, and reading a graph of stopping potential against frequency. They are the usual hard questions in this topic.
Counting photons and current
- The energy of one photon is E = hc/λ. If a source of power P emits light of this wavelength, the number of photons per second is n = P/E.
- If a fraction η of the photons each free one electron, the number of electrons per second is ηn, and the photocurrent is I = ηn e.
- The photocurrent reaches a saturation value when all the emitted electrons reach the collector. It is proportional to the intensity (for the same frequency).
- The stopping potential V₀ satisfies eV₀ = hf − φ, so it depends on the frequency and the metal only.
Worked example 1: photons and current
The figures are for practice. A source of 2 W emits light of wavelength 500 nm. E = hc/λ = 6.63 × 10⁻³⁴ × 3 × 10⁸/(5 × 10⁻⁷) = 3.98 × 10⁻¹⁹ J. The number of photons per second is 2/(3.98 × 10⁻¹⁹) ≈ 5.0 × 10¹⁸. If 1% of the photons release an electron, the number of electrons per second is 5.0 × 10¹⁶, and the current is 5.0 × 10¹⁶ × 1.6 × 10⁻¹⁹ ≈ 8.0 × 10⁻³ A = 8 mA.
The graph of V₀ against f
From eV₀ = hf − φ we get V₀ = (h/e) f − φ/e. This is a straight line: its slope is h/e, the same for every metal, its intercept on the frequency axis is the threshold frequency f₀, and its intercept on the V₀ axis is −φ/e. Different metals give parallel lines.
Worked example 2: reading the graph
The data are illustrative. A metal has V₀ = 0.41 V at f = 6.0 × 10¹⁴ Hz and V₀ = 1.24 V at f = 8.0 × 10¹⁴ Hz. The slope is (1.24 − 0.41)/(2.0 × 10¹⁴) = 4.15 × 10⁻¹⁵ V s. Then h = slope × e = 4.15 × 10⁻¹⁵ × 1.6 × 10⁻¹⁹ ≈ 6.6 × 10⁻³⁴ J s. The work function is φ = hf − eV₀ = (4.15 × 10⁻¹⁵ × 6.0 × 10¹⁴) eV − 0.41 eV = 2.49 − 0.41 = 2.08 eV, and the threshold frequency is f₀ = φ/h = 2.08/(4.15 × 10⁻¹⁵) ≈ 5.0 × 10¹⁴ Hz.
Worked example 3: doubling the frequency
A metal of φ = 2 eV is lit by 3 eV photons, so K_max = 1 eV and V₀ = 1 V. If the frequency is doubled, the photon energy becomes 6 eV, so K_max = 6 − 2 = 4 eV and V₀ = 4 V. The maximum kinetic energy has become four times and not twice as large, because φ does not change.
Worked example 4: two metals
Light of wavelength 400 nm has photon energy 1240/400 = 3.1 eV. On a metal A of work function 2.0 eV, K_max = 3.1 − 2.0 = 1.1 eV. On a metal B of work function 3.0 eV, K_max = 0.1 eV. A metal C of work function 3.5 eV would emit nothing, as 3.1 eV is less than 3.5 eV.
n = P/E. I = η n e. V₀ = (h/e)f − φ/e: slope h/e, intercept on the f axis = f₀. Intensity changes the current, frequency changes V₀.
Traps
- Treating 'doubled frequency' as 'doubled K_max'. Subtract φ first.
- Using the number of photons as the number of electrons. Every photon does not release an electron.
- Using the work function in joules with the photon energy in eV.
Key takeaways
Photon counting is power divided by photon energy. A stopping-potential graph is a straight line with slope h/e. Different metals shift the line sideways but never change its slope.
Check your understanding
-
1. A source of power 3.98 W emits photons of energy 3.98 × 10⁻¹⁹ J each. The number of photons per second is:
- 10¹⁹
- 10²⁰
- 10¹⁸
- 3.98 × 10¹⁹
Show answer
Answer: A. n = P/E = 3.98/(3.98 × 10⁻¹⁹) = 10¹⁹.
-
2. The slope of the graph of stopping potential against frequency is:
- h
- φ
- e/h
- h/e
Show answer
Answer: D. V₀ = (h/e) f − φ/e, so the slope is h/e.
-
3. A metal has φ = 2.5 eV. Photons of 4.5 eV fall on it. The stopping potential is:
- 2.0 V
- 2.5 V
- 4.5 V
- 7.0 V
Show answer
Answer: A. K_max = 4.5 − 2.5 = 2.0 eV, so V₀ = 2.0 V.
-
4. Two metals are lit by the same radiation. The graphs of V₀ against f for the two metals are:
- lines with different slopes
- parallel straight lines
- two identical lines
- curves that meet at the threshold
Show answer
Answer: B. Both have the slope h/e. The lines are parallel and are shifted along the frequency axis by the thresholds.
-
5. Light of intensity I and frequency above the threshold gives a saturation photocurrent of 4 µA. If the intensity is doubled (same frequency), the saturation current becomes:
- 2 µA
- 4 µA
- 8 µA
- 16 µA
Show answer
Answer: C. The saturation current is proportional to the intensity, so it doubles to 8 µA.
Sign in to keep track of the lessons you finish.